Jeudi 28 mai 2026

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: fix use-after-free on registration failure Make sure to disable and free the interrupts in case controller registration fails to avoid a potential use-after-free and resource leak. This issue was flagged by Sashiko when reviewing a controller deregistration fix.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: media: iris: Fix use-after-free in iris_release_internal_buffers() The recent change in commit 1dabf00ee206 ("media: iris: gen1: Destroy internal buffers after FW releases") introduced a regression where session_release_buf() may free the buffer. The caller, iris_release_internal_buffers(), continued to access `buffer` after the call, leading to a potential use-after-free. Fix this by setting BUF_ATTR_PENDING_RELEASE before calling session_release_buf(), and reverting the flag if the call fails. This ensures no dereference occurs after potential freeing.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop caching unowned originator pointers in BAT IV BAT IV keeps the last-hop neighbor address in each neigh_node, but some paths also cache an originator pointer derived from a temporary lookup. That pointer is not owned by the neigh_node and may no longer refer to a live originator entry after purge handling runs. Stop storing the auxiliary originator pointer in the BAT IV neighbor state. When BAT IV needs the neighbor originator data, resolve it from the stored neighbor address and drop the reference again after use. [sven: avoid bonding logic for outgoing OGM]

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: vsock: fix buffer size clamping order In vsock_update_buffer_size(), the buffer size was being clamped to the maximum first, and then to the minimum. If a user sets a minimum buffer size larger than the maximum, the minimum check overrides the maximum check, inverting the constraint. This breaks the intended socket memory boundaries by allowing the vsk->buffer_size to grow beyond the configured vsk->buffer_max_size. Fix this by checking the minimum first, and then the maximum. This ensures the buffer size never exceeds the buffer_max_size.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: HID: playstation: Clamp num_touch_reports A device would never lie about the number of touch reports would it? If it does the loop in dualshock4_parse_report will read off the end of the touch_reports array, up to about 2 KiB for the maximum number of 256 loop iteraions. The data that is read is emitted via evdev if the DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by clamping the num_touch_reports value provided by the device to the maximum size of the touch_reports array.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msg Check bounds against the end of the BO whenever we access the msg.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with list_for_each_entry_safe(), which caches the next entry in @tmp before the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may drop the socket lock inside sctp_wait_for_sndbuf(). While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the association cached in @tmp, migrating it to a new endpoint via sctp_sock_migrate() (list_del_init() + list_add_tail() to newep->asocs), and optionally close the new socket which frees the association via kfree_rcu(). The cached @tmp can also be freed by a network ABORT for that association, processed in softirq while the lock is dropped. sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing revalidates @tmp. After a successful return, the iterator advances to the stale @tmp, yielding either a use-after-free (if the peeled socket was closed) or a list-walk onto the new endpoint's list head (type confusion of &newep->asocs as a struct sctp_association *). Both are reachable from CapEff=0; the type-confusion path gives controlled indirect call via the outqueue.sched->init_sid pointer. Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc() returns. @asoc is known to still be on ep->asocs at that point: the only callers that list_del an association from ep->asocs are sctp_association_free() (which sets asoc->base.dead) and sctp_assoc_migrate() (which changes asoc->base.sk), and sctp_wait_for_sndbuf() checks both under the lock before any successful return; a tripped check propagates as err < 0 and the loop bails before the re-derive. The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so the @tmp cached by list_for_each_entry_safe() still covers the lock-held free that ba59fb027307 ("sctp: walk the list of asoc safely") was added for.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: fix use-after-free on unbind The state machine work is scheduled by the interrupt handler and therefore needs to be cancelled after disabling interrupts to avoid a potential use-after-free.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Add bounds checking to ib_{get,set}_value The uvd/vce/vcn code accesses the IB at predefined offsets without checking that the IB is large enough. Check the bounds here. The caller is responsible for making sure it can handle arbitrary return values. Also make the idx a uint32_t to prevent overflows causing the condition to fail.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm: Set old handle to NULL before prime swap in change_handle There was a potential race condition in change_handle. The ioctl briefly had a single object with two idr entries; a concurrent gem_close could delete the object and remove one of the handles while leaving the other one dangling, which could subsequently be dereferenced for a use-after-free. To fix this, do the same dance that gem_close itself does. (f6cd7daecff5 drm: Release driver references to handle before making it available again) First idr_replace the old handle to NULL. Later, if the prime operations are successful, actually close it. create_tail required a similar dance to avoid a similar problem. (bd46cece51a3 drm/gem: Fix race in drm_gem_handle_create_tail()) It idr_allocs the new handle with NULL, then swaps in the correct object later to avoid races. We don't need to do that here, since the only operations that could race are drm_prime, and change_handle holds the prime lock for the entire duration. v2: cleanups of error paths

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: fix UAF in inactivity-timer cleanup path Commit 38224c472a03 ("HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe") added timer_delete_sync(&kbd->inactivity_timer) to both the probe close_hw error path and appletb_kbd_remove(), but the way it was wired in left the inactivity timer reachable during driver tear-down via two distinct windows. Window A -- put_device() before timer_delete_sync(): put_device(&kbd->backlight_dev->dev); timer_delete_sync(&kbd->inactivity_timer); The inactivity_timer softirq reads kbd->backlight_dev and calls backlight_device_set_brightness() -> mutex_lock(&ops_lock). If a concurrent hid_appletb_bl unbind drops the last devm reference between these two calls, the backlight_device is freed and the mutex_lock() touches freed memory. Window B -- backlight cleanup before hid_hw_stop(): if (kbd->backlight_dev) { timer_delete_sync(...); put_device(...); } hid_hw_close(hdev); hid_hw_stop(hdev); Even after Window A is closed, hid_hw_close()/hid_hw_stop() still run afterwards, so a late ".event" callback from the HID core (USB URB completion on real Apple hardware) can arrive after timer_delete_sync() drained the softirq but before put_device() drops the reference. That callback reaches reset_inactivity_timer(), which calls mod_timer() and re-arms the timer. The freshly re-armed timer can then fire on the about-to-be-freed backlight_device. Both windows produce the same KASAN slab-use-after-free: BUG: KASAN: slab-use-after-free in __mutex_lock+0x1aab/0x21c0 Read of size 8 at addr ffff88803ee9a108 by task swapper/0/0 Call Trace: <IRQ> __mutex_lock backlight_device_set_brightness appletb_inactivity_timer call_timer_fn run_timer_softirq handle_softirqs Allocated by task N: devm_backlight_device_register appletb_bl_probe Freed by task M: (concurrent hid_appletb_bl unbind path) Close both windows at once by reworking the tear-down in appletb_kbd_remove() and in the probe close_hw error path so that 1) hid_hw_close()/hid_hw_stop() run before the backlight cleanup, guaranteeing no further .event callback can fire and re-arm the timer, and 2) inside the "if (kbd->backlight_dev)" block, timer_delete_sync() runs before put_device(), so the softirq is drained before the final reference is dropped.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: prevent use-after-free when deleting claims When batadv_bla_del_backbone_claims() removes all claims for a backbone, it does this by dropping the link entry in the hash list. This list entry itself was one of the references which need to be dropped at the same time via batadv_claim_put(). But the batadv_claim_put() must not be done before the last access to the claim object in this function. Otherwise the claim might be freed already by the batadv_claim_release() function before the list entry was dropped.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: media: iris: fix use-after-free of fmt_src during MBPF check During concurrency testing, multiple instances can run in parallel, and each instance uses its own inst->lock while the core->lock protects the list of active instances. The race happens because these locks cover different scopes, inst->lock protects only the internals of a single instance, while the Macro Blocks Per Frame (MBPF) checker walks the core list under core->lock and reads fields like fmt_src->width and fmt_src->height. At the same time, iris_close() may free fmt_src and fmt_dst under inst->lock while the instance is still present in the core list. This allows a situation where the MBPF checker, still iterating through the core list, reaches an instance whose fmt_src was already freed by another thread and ends up dereferencing a dangling pointer, resulting in a use-after-free. This happens because the MBPF checker assumes that any instance in the core list is fully valid, but the freeing of fmt_src and fmt_dst without removing the instance from the core list is not correct. The correct ordering is to defer freeing fmt_src and fmt_dst until after the instance has been removed from the core list and all teardown under the core lock has completed, ensuring that no dangling pointers are ever exposed during MBPF checks.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs() drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions using plain integer division: unsigned int width = mode_cmd->width / (i ? info->hsub : 1); unsigned int height = mode_cmd->height / (i ? info->vsub : 1); However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses drm_format_info_plane_width/height() which round up dimensions via DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object size check for certain pixel format and dimension combinations. For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the GEM size validation path sees height=0 instead of height=1. The expression (height - 1) then wraps to UINT_MAX as an unsigned int, causing min_size to overflow and wrap back to a small value. A tiny GEM object therefore passes the size guard, yet when the GPU accesses the chroma plane it will read or write memory beyond the object's bounds. Fix by replacing the open-coded divisions with drm_format_info_plane_width() and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match the calculation already used in framebuffer_check().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop tp_meter sessions during mesh teardown TP meter sessions remain linked on bat_priv->tp_list after the netlink request has already finished. When the mesh interface is removed, batadv_mesh_free() currently tears down the mesh without first draining these sessions. A running sender thread or a late incoming tp_meter packet can then keep processing against a mesh instance which is already shutting down. Synchronize tp_meter with the mesh lifetime by stopping all active sessions from batadv_mesh_free() and waiting for sender threads to exit before teardown continues.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject new tp_meter sessions during teardown Prevent tp_meter from starting new sender or receiver sessions after mesh_state has left BATADV_MESH_ACTIVE.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: staging: media: atomisp: Disallow all private IOCTLs Disallow all private IOCTLs. These aren't quite as safe as one could assume of IOCTL handlers; disable them for now. Instead of removing the code, return in the beginning of the function if cmd is non-zero in order to keep static checkers happy.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: Prevent OOB reads when parsing IB Rewrite the IB parsing to use amdgpu_ib_get_value() which handles the bounds checks.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: fix unclocked access on unbind Make sure that the controller is runtime resumed before disabling it during driver unbind to avoid an unclocked register access. This issue was flagged by Sashiko when reviewing a controller deregistration fix.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import() When xe_dma_buf_init_obj() fails, the attachment from dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before returning the error. Note: we cannot use goto out_err here because xe_dma_buf_init_obj() already frees bo on failure, and out_err would double-free it. (cherry picked from commit a828eb185aac41800df8eae4b60501ccc0dbbe51)

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: Prevent OOB reads when parsing dec msg Check bounds against the end of the BO whenever we access the msg.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix integer overflow on buff_pos Fixing an integer overflow present in batadv_iv_ogm_send_to_if. The size check is done using the int type in batadv_iv_ogm_aggr_packet whereas the buff_pos variable uses the s16 type. This could lead to an out-of-bound read.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: validate SVM ioctl nattr against buffer size Validate nattr field against the buffer size, preventing out-of-bounds buffer access via user-controlled attribute count. (cherry picked from commit 5eca8bfdfa456c3304ca77523718fe24254c172f)

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fbcon: Avoid OOB font access if console rotation fails Clear the font buffer if the reallocation during console rotation fails in fbcon_rotate_font(). The putcs implementations for the rotated buffer will return early in this case. See [1] for an example. Currently, fbcon_rotate_font() keeps the old buffer, which is too small for the rotated font. Printing to the rotated console with a high-enough character code will overflow the font buffer. v2: - fix typos in commit message

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show() Sashiko noticed an out-of-bounds read [1]. In spi_nor_params_show(), the snor_f_names array is passed to spi_nor_print_flags() using sizeof(snor_f_names). Since snor_f_names is an array of pointers, sizeof() returns the total number of bytes occupied by the pointers (element_count * sizeof(void *)) rather than the element count itself. On 64-bit systems, this makes the passed length 8x larger than intended. Inside spi_nor_print_flags(), the 'names_len' argument is used to bounds-check the 'names' array access. An out-of-bounds read occurs if a flag bit is set that exceeds the array's actual element count but is within the inflated byte-size count. Correct this by using ARRAY_SIZE() to pass the actual number of string pointers in the array.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support

In the Linux kernel, the following vulnerability has been resolved: RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path Sashiko points out that pvrdma_uar_free() is already called within pvrdma_dealloc_ucontext(), so calling it before triggers a double free.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: protect path kfree() with damon_sysfs_lock damon_sysfs_quot_goal->path can be read and written by users, via DAMON sysfs 'path' file. It can also be indirectly read, for the parameters {on,off}line committing to DAMON. The reads for parameters committing are protected by damon_sysfs_lock to avoid the sysfs files being destroyed while any of the parameters are being read. But the user-driven direct reads and writes are not protected by any lock, while the write is deallocating the path-pointing buffer. As a result, the readers could read the already freed buffer (user-after-free). Note that the user-reads don't race when the same open file is used by the writer, due to kernfs's open file locking. Nonetheless, doing the reads and writes with separate open files would be common. Fix it by protecting both the user-direct reads and writes with damon_sysfs_lock.

Linux · Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event() Sashiko points out the radix_tree itself is RCU safe, but nothing ever frees the mlx4_srq struct with RCU, and it isn't even accessed within the RCU critical section. It also will crash if an event is delivered before the srq object is finished initializing. Use the spinlock since it isn't easy to make RCU work, use refcount_inc_not_zero() to protect against partially initialized objects, and order the refcount_set() to be after the srq is fully initialized.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task Watchdog task might end between send_sig() and kthread_stop() calls, what results in the use-after-free issue. Fix this by increasing watchdog task reference count before calling send_sig() and dropping it by switching to kthread_stop_put().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq() Sashiko points out that mlx4_srq_alloc() was not undone during error unwind, add the missing call to mlx4_srq_free().

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ipmi: Add limits to event and receive message requests The driver would just fetch events and receive messages until the BMC said it was done. To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition, an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck, it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck. This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver. It's not a bug per-se, but it is accounting for bugs in BMCs.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 9

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init() mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When ib_create_srq() fails for s1, the error branch destroys s0 but falls through and unconditionally assigns the freed s0 and the ERR_PTR s1 to devr->s0 and devr->s1. This leads to several problems: the lock-free fast path checks "if (devr->s1) return 0;" and treats the ERR_PTR as already initialised; users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences the ERR_PTR and double-frees s0 on teardown. Fix by adding the same `goto unlock` in the s1 failure path.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by FGGC of node block During FGGC node block migration, fsck may incorrectly treat the migrated node block as fsync-written data. The reproduction scenario: root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync root@vm:/mnt/f2fs# rm -f 1 root@vm:/mnt/f2fs# sync root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The root cause is that GC does not clear the dentry mark and fsync mark during node block migration, leading fsck to misinterpret them as user-issued fsync writes. In BGGC mode, node block migration is handled by f2fs_sync_node_pages(), which guarantees the dentry and fsync marks are cleared before writing. This patch move the set/clear of the fsync|dentry marks into __write_node_folio to make the logic clearer, and ensures the fsync|dentry mark is cleared in FGGC.

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache Make sure resources are not improperly shared in the op cache and cause instruction corruption this way.

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem

In the Linux kernel, the following vulnerability has been resolved: exit: prevent preemption of oopsing TASK_DEAD task When an already-exiting task oopses, make_task_dead() currently calls do_task_dead() with preemption enabled. That is forbidden: do_task_dead() calls __schedule(), which has a comment saying "WARNING: must be called with preemption disabled!". If an oopsing task is preempted in do_task_dead(), between becoming TASK_DEAD and entering the scheduler explicitly, bad things happen: finish_task_switch() assumes that once the scheduler has switched away from a TASK_DEAD task, the task can never run again and its stack is no longer needed; but that assumption apparently doesn't hold if the dead task was preempted (the SM_PREEMPT case). This means that the scheduler ends up repeatedly dropping references on the dead task's stack, which can lead to use-after-free or double-free of the entire task stack; in other words, two tasks can end up running on the same stack, resulting in various kinds of memory corruption. (This does not just affect "recursively oopsing" tasks; it is enough to oops once during task exit, for example in a file_operations::release handler)

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 9

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use safe list iteration in radar detect work The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to be freed and removed from the list. Guard against this to avoid a slab-use-after-free error.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free in create_space_info_sub_group() error path When kobject_init_and_add() fails, the call chain is: create_space_info_sub_group() -> btrfs_sysfs_add_space_info_type() -> kobject_init_and_add() -> failure -> kobject_put(&sub_group->kobj) -> space_info_release() -> kfree(sub_group) Then control returns to create_space_info_sub_group(), where: btrfs_sysfs_add_space_info_type() returns error -> kfree(sub_group) Thus, sub_group is freed twice. Keep parent->sub_group[index] = NULL for the failure path, but after btrfs_sysfs_add_space_info_type() has called kobject_put(), let the kobject release callback handle the cleanup.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: wifi: b43legacy: enforce bounds check on firmware key index in RX path Same fix as b43: the firmware-controlled key index in b43legacy_rx() can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read of dev->key[]. Make the check enforcing by dropping the frame for invalid indices.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ice: fix double free in ice_sf_eth_activate() error path When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev). The device release callback ice_sf_dev_release() frees sf_dev, but the current error path falls through to sf_dev_free and calls kfree(sf_dev) again, causing a double free. Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but avoid falling through to sf_dev_free after auxiliary_device_uninit().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger Currently the runtime.oss.trigger field may be accessed concurrently without protection, which may lead to the data race. And, in this case, it may lead to more severe problem because it's a bit field; as writing the data, it may overwrite other bit fields as well, which confuses the operation completely, as spotted by fuzzing. Fix it by covering runtime.oss.trigger bit fled also with the existing params_lock mutex in both snd_pcm_oss_get_trigger() and snd_pcm_oss_poll().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters scx_group_set_{weight,idle,bandwidth}() cache scx_root before acquiring scx_cgroup_ops_rwsem, so the pointer can be stale by the time the op runs. If the loaded scheduler is disabled and freed (via RCU work) and another is enabled between the naked load and the rwsem acquire, the reader sees scx_cgroup_enabled=true (the new scheduler's) but dereferences the freed one - UAF on SCX_HAS_OP(sch, ...) / SCX_CALL_OP(sch, ...). scx_cgroup_enabled is toggled only under scx_cgroup_ops_rwsem write (scx_cgroup_{init,exit}), so reading scx_root inside the rwsem read section correlates @sch with the enabled snapshot.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drop stray 'static' from fast-RX rx_result ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but its per-invocation rx_result is declared static. Concurrent callers then share one instance and can overwrite each other's result between ieee80211_rx_mesh_data() and the switch on res. That can make a packet that was queued or consumed by ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make a packet that should continue return as queued. Make res an automatic variable so each invocation keeps its own result.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fanotify: fix false positive on permission events fsnotify_get_mark_safe() may return false for a mark on an unrelated group, which results in bypassing the permission check. Fix by skipping over detached marks that are not in the current group.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show() target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a 256-byte stack buffer, then will memcpy() cur_len bytes from that buffer. snprintf() returns the length the output would have had, which can exceed the buffer size when the fabric WWN is long because iSCSI IQN names can be up to 223 bytes. The check at the memcpy() site only guards the destination page write, not the source read, so memcpy() will read past the stack buffer and copy adjacent stack contents to the sysfs reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic() will be triggered. Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length check to avoid buffer overflow") added the same bound to the target_lu_gp_members_show() but the tg_pt_gp variant was missed so resolve that here.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: validate WMT event SKB length before struct access btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc (9 bytes) without first checking that the SKB contains enough data. A short firmware response causes out-of-bounds reads from SKB tailroom. Use skb_pull_data() to validate and advance past the base WMT event header. For the FUNC_CTRL case, pull the additional status field bytes before accessing them.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix a potential clc buffer length underflow The buf_len is used to limit the iterations for retrieving the country power setting and may underflow under certain conditions due to changes in the power table in CLC. This underflow leads to an almost infinite loop or an invalid power setting resulting in driver initialization failure.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject unknown opcodes before ICRC processing Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv"), a single unauthenticated UDP packet can still trigger panic. That patch handled payload_size() underflow only for valid opcodes with short packets, not for packets carrying an unknown opcode. The unknown-opcode OOB read described below predates that commit and reaches back to the initial Soft RoCE driver. The check added there reads pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The rxe_opcode[] array has 256 entries but is only populated for defined IB opcodes; any other entry (for example opcode 0xff) is zero-initialized, so length == 0 and the check degenerates to pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES which underflows when length == 0 and passes a huge value to rxe_crc32(), causing an out-of-bounds read of the skb payload. Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after rdma link add rxe0 type rxe netdev eth0 A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and QPN=IB_MULTICAST_QPN triggers: BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170 Read of size 1 at addr ... The buggy address is located 0 bytes to the right of allocated 704-byte region Call Trace: crc32_le+0x115/0x170 rxe_icrc_hdr.isra.0+0x226/0x300 rxe_icrc_check+0x13f/0x3a0 rxe_rcv+0x6e1/0x16e0 rxe_udp_encap_recv+0x20a/0x320 udp_queue_rcv_one_skb+0x7ed/0x12c0 Subsequent packets with the same shape fault on unmapped memory and panic the kernel. The trigger requires only module load and "rdma link add"; no QP, no connection, and no authentication. Fix this by rejecting packets whose opcode has no rxe_opcode[] entry, detected via the zero mask or zero length, before any length arithmetic runs.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: dm-verity-fec: fix reading parity bytes split across blocks (take 3) fec_decode_bufs() assumes that the parity bytes of the first RS codeword it decodes are never split across parity blocks. This assumption is false. Consider v->fec->block_size == 4096 && v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs << DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes. Considering that the parity data for each message block starts on a block boundary, the byte alignment in the parity data will iterate through 272*i mod 4096 until the 3 parity blocks have been consumed. On the 16th call (i=15), the alignment will be 4080 bytes into the first block. Only 16 bytes remain in that block, but 17 parity bytes will be needed. The code reads out-of-bounds from the parity block buffer. Fortunately this doesn't normally happen, since it can occur only for certain non-default values of fec_roots *and* when the maximum number of buffers couldn't be allocated due to low memory. For example with block_size=4096 only the following cases are affected: fec_roots=17: nbufs in [1, 3, 5, 15] fec_roots=19: nbufs in [1, 229] fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195] fec_roots=23: nbufs in [1, 89] Regardless, fix it by refactoring how the parity blocks are read.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free in create_space_info() error path When kobject_init_and_add() fails, the call chain is: create_space_info() -> btrfs_sysfs_add_space_info_type() -> kobject_init_and_add() -> failure -> kobject_put(&space_info->kobj) -> space_info_release() -> kfree(space_info) Then control returns to create_space_info(): btrfs_sysfs_add_space_info_type() returns error -> goto out_free -> kfree(space_info) This causes a double free. Keep the direct kfree(space_info) for the earlier failure path, but after btrfs_sysfs_add_space_info_type() has called kobject_put(), let the kobject release callback handle the cleanup.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: remove station if connection prep fails If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: isofs: validate block number from NFS file handle in isofs_export_iget isofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker- controlled block number (ifid->block or ifid->parent_block) from the NFS file handle to isofs_export_iget(), which only rejects block == 0 before calling isofs_iget() and ultimately sb_bread(). A crafted file handle with fh_len sufficient to pass the check added by commit 0405d4b63d08 ("isofs: Prevent the use of too small fid") can still drive the server to read any in-range block on the backing device as if it were an iso_directory_record. That earlier fix was assigned CVE-2025-37780. sb_bread() on an out-of-range block returns NULL cleanly via the EIO path, so there is no memory-safety violation. For in-range reads of adjacent-partition data on the same block device, the unrelated bytes end up in iso_inode_info fields that reach the NFS client as dentry metadata. The deployment surface (isofs exported over NFS from loop-mounted images) is narrow and requires an authenticated NFS peer, but the malformed-file-handle class is reportable as hardening next to the existing CVE-2025-37780 fix. Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() so the check covers both isofs_fh_to_dentry() and isofs_fh_to_parent() call sites with a single line.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: clamp rx length before skb_put virtbt_rx_work() calls skb_put(skb, len) where len comes directly from virtqueue_get_buf() with no validation against the buffer we posted to the device. The RX skb is allocated in virtbt_add_inbuf() and exposed to virtio as exactly 1000 bytes via sg_init_one(). Checking len against skb_tailroom(skb) is not sufficient because alloc_skb() can leave more tailroom than the 1000 bytes actually handed to the device. A malicious or buggy backend can therefore report used.len between 1001 and skb_tailroom(skb), causing skb_put() to include uninitialized kernel heap bytes that were never written by the device. The same path also accepts len == 0, in which case skb_put(skb, 0) leaves the skb empty but virtbt_rx_handle() still reads the pkt_type byte from skb->data, consuming uninitialized memory. Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and sg_init_one(), and gate virtbt_rx_work() on that same constant so the bound checked matches the buffer actually exposed to the device. Reject used.len == 0 in the same gate so an empty completion can no longer reach virtbt_rx_handle(). Use bt_dev_err_ratelimited() because the length value comes from an untrusted backend that can otherwise flood the kernel log. Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened the USB 9p transport against unchecked device-reported length.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: wifi: b43: enforce bounds check on firmware key index in b43_rx() The firmware-controlled key index in b43_rx() can exceed the dev->key[] array size (58 entries). The existing B43_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read. Make the B43_WARN_ON check enforcing by dropping the frame when the firmware returns an invalid key index.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path". Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race with their writes, results in use-after-free. Fix those. This patch (of 2): damon_sysfs_scheme_filter->mmecg_path can be read and written by users, via DAMON sysfs memcg_path file. It can also be indirectly read, for the parameters {on,off}line committing to DAMON. The reads for parameters committing are protected by damon_sysfs_lock to avoid the sysfs files being destroyed while any of the parameters are being read. But the user-driven direct reads and writes are not protected by any lock, while the write is deallocating the memcg_path-pointing buffer. As a result, the readers could read the already freed buffer (user-after-free). Note that the user-reads don't race when the same open file is used by the writer, due to kernfs's open file locking. Nonetheless, doing the reads and writes with separate open files would be common. Fix it by protecting both the user-direct reads and writes with damon_sysfs_lock.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ip6_gre: Use cached t->net in ip6erspan_changelink(). After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns ip6gre hash via link_net. ip6erspan_changelink() was not converted in that series and still uses dev_net(dev), which diverges from the device's creation netns after IFLA_NET_NS_FD migration. This re-inserts the tunnel into the wrong per-netns hash. The original netns keeps a stale entry. When that netns is later destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a slab-use-after-free reported by KASAN, followed by a kernel BUG at net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify(). Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). ip6gre_changelink() earlier in the same file already uses the cached t->net; only ip6erspan_changelink() has the wrong shape.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9

In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss() Sashiko points out that the user can specify WQs sharing the same CQ as a part of the uAPI and this will trigger the WARN_ON() then go on to corrupt the kernel. Just reject it outright and fail the QP creation.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 7 Extended Lifecycle Support

In the Linux kernel, the following vulnerability has been resolved: xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s hlist_del_rcu calls under syzkaller load on linux-6.12.y stable (reproduced on 6.12.47, also reachable via the same code path on torvalds/master and on the ipsec tree). Nine unique signatures cluster in the xfrm_state lifecycle, the load-bearing one being: BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline] BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline] BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435 Workqueue: netns cleanup_net Call Trace: __hlist_del / hlist_del_rcu __xfrm_state_delete xfrm_state_delete xfrm_state_flush xfrm_state_fini ops_exit_list cleanup_net The other observed signatures hit the same slab object from __xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB write variant of __xfrm_state_delete, all on the byseq/byspi hash chains. __xfrm_state_delete() guards its byseq and byspi unhashes with value-based predicates: if (x->km.seq) hlist_del_rcu(&x->byseq); if (x->id.spi) hlist_del_rcu(&x->byspi); while everywhere else in the file (e.g. state_cache, state_cache_input) the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets x->id.spi = newspi inside xfrm_state_lock and then immediately inserts into byspi, but a path that observes x->id.spi != 0 outside of xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently with whether x is actually on the list. The same holds for x->km.seq versus byseq, and the bydst/bysrc unhashes have no predicate at all, so a second __xfrm_state_delete() on the same object writes through LIST_POISON pprev. The defensive change here: - Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst, bysrc, byseq and byspi so a second deletion is a no-op rather than a write through LIST_POISON pprev. The byseq/byspi nodes are already initialised in xfrm_state_alloc(). - Test hlist_unhashed() rather than the value predicate for byseq/byspi, so the unhash decision tracks list state rather than mutable scalar fields. Empirical verification: applied this patch on top of v6.12.47, rebuilt, and re-ran the same syzkaller harness for 1h16m on a previously-crashy configuration that produced ~100 hits each of slab-use-after-free Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in __xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at ~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo confirms the xfrm_state slab is actively allocated and freed during the run (~143 KiB resident), so the fuzzer is still exercising those code paths -- they just no longer crash. Reproduction: - Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV - syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db - 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal - 9 unique signatures collected in ~9h, all within xfrm_state lifecycle

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c unconditionally dereferences 8 bytes at payload_addr(pkt): value = *(u64 *)payload_addr(pkt); check_rkey() previously accepted an ATOMIC_WRITE request with pktlen == resid == 0 because the length validation only compared pktlen against resid. A remote initiator that sets the RETH length to 0 therefore reaches atomic_write_reply() with a zero-byte logical payload, and the responder reads sizeof(u64) bytes from past the logical end of the packet into skb->head tailroom, then writes those 8 bytes into the attacker's MR via rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel tailroom per probe (the other 4 bytes are the packet's own trailing ICRC). IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is protocol-invalid. Hoist a strict length check into check_rkey() so the responder never reaches the unchecked dereference, and keep the existing WRITE-family length logic for the normal RDMA WRITE path. Reproduced on mainline with an unmodified rxe driver: a sustained zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer bytes into the attacker's MR, including recognisable kernel strings and partial kernel-direct-map pointer words. With this patch applied the responder rejects the PDU and the MR stays all-zero.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected GFN The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus the SPTE index. This assumption breaks for shadow paging if the guest page tables are modified between VM entries (similar to commit aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE", 2026-03-27). The flow is as follows: - a PDE is installed for a 2MB mapping, and a page in that area is accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages; the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because the guest's mapping is a huge page (and thus contiguous). - the PDE mapping is changed from outside the guest. - the guest accesses another page in the same 2MB area. KVM installs a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN (i.e. based on the new mapping, as changed in the previous step) but that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore the rmap entry cannot be found and removed when the kvm_mmu_page is zapped. - the memslot that covers the first 2MB mapping is deleted, and the kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove() only looks at the [sp->gfn, sp->gfn + 511] range established in step 1, and fails to find the rmap entry that was recorded by step 3. - any operation that causes an rmap walk for the same page accessed by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page. This includes dirty logging or MMU notifier invalidations (e.g., from MADV_DONTNEED). The underlying issue is that KVM's walking of shadow PTEs assumes that if a SPTE is present when KVM wants to install a non-leaf SPTE, then the existing kvm_mmu_page must be for the correct gfn. Because the only way for the gfn to be wrong is if KVM messed up and failed to zap a SPTE... which shouldn't happen, but *actually* only happens in response to a guest write. That bug dates back literally forever, as even the first version of KVM assumes that the GFN matches and walks into the "wrong" shadow page. However, that was only an imprecision until 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages") came along. Fix it by checking for a target gfn mismatch and zapping the existing SPTE. That way the old SP and rmap entries are gone, KVM installs the rmap in the right location, and everyone is happy.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix unlocked call to hns_roce_qp_remove() Sashiko points out that hns_roce_qp_remove() requires the caller to hold locks. The error flow in hns_roce_create_qp_common() doesn't hold those locks for the error unwind so it risks corrupting memory. Grab the same locks the other two callers use.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix potential UAF in create_big_sync Add hci_conn_valid() check in create_big_sync() to detect stale connections before proceeding with BIG creation. Handle the resulting -ECANCELED in create_big_complete() and re-validate the connection under hci_dev_lock() before dereferencing, matching the pattern used by create_le_conn_complete() and create_pa_complete(). Keep the hci_conn object alive across the async boundary by taking a reference via hci_conn_get() when queueing create_big_sync(), and dropping it in the completion callback. The refcount and the lock are complementary: the refcount keeps the object allocated, while hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on hdev->conn_hash, as required by hci_conn_del(). hci_conn_put() is called outside hci_dev_unlock() so the final put (which resolves to kfree() via bt_link_release) does not run under hdev->lock, though the release path would be safe either way. Without this, create_big_complete() would unconditionally dereference the conn pointer on error, causing a use-after-free via hci_connect_cfm() and hci_conn_del().

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Prevent NULL deref when RX memory exhausted The CPU receives frames from the MAC through conventional DMA: the CPU allocates buffers for the MAC, then the MAC fills them and returns ownership to the CPU. For each hardware RX queue, the CPU and MAC coordinate through a shared ring array of DMA descriptors: one descriptor per DMA buffer. Each descriptor includes the buffer's physical address and a status flag ("OWN") indicating which side owns the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set the flag and the MAC is only allowed to clear it, and both must move through the ring in sequence: thus the ring is used for both "submissions" and "completions." In the stmmac driver, stmmac_rx() bookmarks its position in the ring with the `cur_rx` index. The main receive loop in that function checks for rx_descs[cur_rx].own=0, gives the corresponding buffer to the network stack (NULLing the pointer), and increments `cur_rx` modulo the ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its position with `dirty_rx`, allocates fresh buffers and rearms the descriptors (setting OWN=1). If it fails any allocation, it simply stops early (leaving OWN=0) and will retry where it left off when next called. This means descriptors have a three-stage lifecycle (terms my own): - `empty` (OWN=1, buffer valid) - `full` (OWN=0, buffer valid and populated) - `dirty` (OWN=0, buffer NULL) But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In the past (see 'Fixes:'), there was a bug where the loop could cycle `cur_rx` all the way back to the first descriptor it dirtied, resulting in a NULL dereference when mistaken for `full`. The aforementioned commit resolved that *specific* failure by capping the loop's iteration limit at `dma_rx_size - 1`, but this is only a partial fix: if the previous stmmac_rx_refill() didn't complete, then there are leftover `dirty` descriptors that the loop might encounter without needing to cycle fully around. The current code therefore panics (see 'Closes:') when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to catch up to `dirty_rx`. Fix this by explicitly checking, before advancing `cur_rx`, if the next entry is dirty; exit the loop if so. This prevents processing of the final, used descriptor until stmmac_rx_refill() succeeds, but fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix intended: so remove the clamp as well. Since stmmac_rx_zc() is a copy-paste-and-tweak of stmmac_rx() and the code structure is identical, any fix to stmmac_rx() will also need a corresponding fix for stmmac_rx_zc(). Therefore, apply the same check there. In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the MAC sets OWN=0 on the final descriptor, it will be unable to send any further DMA-complete IRQs until it's given more `empty` descriptors. Currently, the driver simply *hopes* that the next stmmac_rx_refill() succeeds, risking an indefinite stall of the receive process if not. But this is not a regression, so it can be addressed in a future change.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: dm-thin: fix metadata refcount underflow There's a bug in dm-thin in the function rebalance_children. If the internal btree node has one entry, the code tries to copy all btree entries from the node's child to the node itself and then decrement the child's reference count. If the child node is shared (it has reference count > 1), we won't free it, so there would be two pointers to each of the grandchildren nodes. But the reference counts of the grandchildren is not increased, thus the reference count doesn't match the number of pointers that point to the grandchildren. This results in "device mapper: space map common: unable to decrement block" errors. Fix this bug by incrementing reference counts on the grandchildren if the btree node is shared.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Limit NVMe request size to 2 MiB The HBA firmware reports NVMe MDTS values based on the underlying drive capability. However, because the driver allocates a fixed 4K buffer for the PRP list, accommodating at most 512 entries, the driver supports a maximum I/O transfer size of 2 MiB. Limit max_hw_sectors to the smaller of the reported MDTS and the 2 MiB driver limit to prevent issuing oversized I/O that may lead to a kernel oops.