Mercredi 27 mai 2026

mcdope pam_usb

pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.0, pam_usb's deny_remote feature checks utmpx ut_addr_v6 to detect whether an authentication request originates from a remote session. The outer guard was if (utent->ut_addr_v6[0] != 0), which only tests the first 32-bit word of the 128-bit address field. IPv4-mapped IPv6 addresses (::ffff:x.x.x.x) store the IPv4 address in ut_addr_v6[3] with ut_addr_v6[0] == 0. On systems where the SSH daemon listens on :: (IPv6 wildcard) with AddressFamily any -- common on Ubuntu and Debian -- incoming IPv4 connections are recorded in utmpx as IPv4-mapped IPv6 addresses. The outer check evaluates to false, the remote-detection block is skipped entirely, and the session is treated as local. deny_remote=true does not block the authentication. An attacker with physical access to a registered USB device can authenticate over SSH on an affected system as if they were sitting at a local terminal, bypassing the deny_remote restriction. This vulnerability is fixed in 0.9.0.

solana-foundation anchor · Anchor-lang anchor

Anchor is a framework providing several convenient developer tools for writing Solana programs. From 1.0.0 to before 1.0.2, an logic error causes anchor programs to accept any program id when requiring the system program id, causing false assumptions resulting in potential arbitrary cpi in programs that invoke system program instructions. In the TryFrom<&'a AccountInfo<'a>> implementation for Program<'a, T>, the id of T is compared with Pubkey::default() to check whether anchor should allow any executable account, or a specific account, because when no T is supplied, T defaults to (), which implements Id::id() by returning Pubkey::default(). This results in T = () and T = System (which has Pubkey::default() as the id) having the same behavior, both allow any executable account. Programs built with anchor assume that the anchor runtime verifies passed in programs of type Program<'a, System> are in fact the system program. This false assumption can lead to arbitrary CPI or payment bypassing when programs try making CPI calls to the system program using the passed in system program due to the fact that the attacker can pass in any program instead of the system program. This vulnerability is fixed in 1.0.2.

cnighswonger claude-code-cache-fix

claude-code-cache-fix is a cache optimization proxy for Claude Code. From 3.5.0 to before 3.5.2, tools/quota-statusline.sh (introduced in v3.5.0) interpolates Claude Code's hook stdin payload directly into a Python triple-quoted string literal. A ''' byte sequence in any user-controlled field of the payload closes the literal early and lets following bytes execute as Python in the user's Claude Code process. This vulnerability is fixed in 3.5.2.

mcdope pam_usb

pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, src/tmux.c reads the user's $TMUX environment variable, splits it on commas, and interpolates the socket-path component directly into a shell command passed to popen(). Because the value is placed inside double-quotes without sanitisation, any value containing " terminates the quoted string and injects arbitrary shell syntax. popen() runs as root inside the PAM stack. This vulnerability is fixed in 0.8.7.

mcdope pam_usb

pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, a crafted UUID such as $(id>/tmp/rce) in the config causes root RCE when pamusb-conf --reset-pads is run. A USB device with a crafted filesystem UUID (some controllers allow this) can inject the payload at --add-device time. Also, userName from the XML config is passed to os.system() in pamusb-agent, which invokes a shell. This vulnerability is fixed in 0.8.7.

mcdope pam_usb

pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, symlink attacks on pad directory and pad files enable authentication bypass and root file corruption. This vulnerability is fixed in 0.8.7.

mcdope pam_usb

pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.8.7, pamusb-pinentry reads the PINENTRY_FALLBACK_APP environment variable and executes it directly without any validation. Any process that can set environment variables before pamusb-pinentry is invoked can point PINENTRY_FALLBACK_APP at an arbitrary binary or script and have it executed with the privileges of the pam_usb tool chain. This vulnerability is fixed in 0.8.7.

ultrajson · Ultrajson project ultrajson

UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. Prior to 5.12.1, when ujson.dump() writes to a file-like object and the write operation raises an exception, the serialized JSON string object is not decremented, leaking memory. Each failed write operation leaks the full size of the serialized payload. This vulnerability is fixed in 5.12.1.

Gladinet Triofox

A path traversal vulnerability exists in WOSDefaultHttpModule.dll when processing a URL path starting with /woshome

Gladinet Triofox

Function calls to WOSCommonUtil.dll!WOSSysInfoGetDeviceInterface() in various DLLs (i.e., WOSProfileMgrModule.dll, WOSWebDavModule.dll) can return a NULL pointer (i.e., when no user is logged into the Triofox Server Agent Management Console). The returned NULL pointer is not checked before being dereferenced.

Gladinet Triofox

When processing a request with a URL path starting with /status or /sysinfo, WOSHttpStatusModule.dll is to be loaded to handle such URL patterns. The WOSBin_LoadHttpModule function in the dll would be called to set up a "module" object for that module. However, WOSHttpStatusModule.dll is not present in the installation. As a result, a function pointer to WOSBin_LoadHttpModule (which would have been in the export table in WOSHttpStatusModule.dll) is set to NULL, resulting in calling a function at address 0.

mcdope pam_usb

pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, when a PAM service is configured with deny_remote=false in pam_usb (commonly done for display managers such as gdm-password or lightdm to bypass process/TTY heuristics for local sessions), the PAM_RHOST check in pusb_do_auth() is also skipped. PAM_RHOST is set by remote daemons (sshd, XDMCP servers) to identify the remote client address. Because the check is gated inside if (opts.deny_remote), a genuine remote XDMCP connection reaches the USB device authentication step instead of being rejected. This vulnerability is fixed in 0.9.1.

mcdope pam_usb

pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.0, the pusb_pad_compare() function in src/pad.c only verified that the user-side pad (~/.pamusb/device.pad) could be read, but did not enforce that the system-side pad (the pad file on the USB device) was also present and readable. If the user-side pad was deleted or unreadable, the function returned a failure that was treated as non-fatal in certain code paths, allowing authentication to succeed without the USB device being verified. A local user can delete their own ~/.pamusb/device.pad to remove the USB device requirement and authenticate without the physical device. This vulnerability is fixed in 0.9.0.

inducer relate

RELATE is a web-based courseware package. Prior to commit d66ba5659b459bf1ba56b7109b5f9ecf197cbefb, RELATE LMS configures its Celery workers to accept and deserialize untrusted 'pickle' data. An attacker who can reach the message broker can execute arbitrary commands on the host server. Combined with missing network isolation in the code execution sandbox, this allows an authenticated student to achieve full Remote Code Execution (RCE) on the host system. Commit d66ba5659b459bf1ba56b7109b5f9ecf197cbefb fixes the issue.

langchain-ai langsmith-sdk

LangSmith Client SDKs provide SDK's for interacting with the LangSmith platform. Prior to LangSmith SDK Python 0.8.0 and JS/TS 0.6.0, the LangSmith SDK's prompt pull methods (pull_prompt / pull_prompt_commit in Python, pullPrompt / pullPromptCommit in JS/TS) fetch and deserialize prompt manifests from the LangSmith Hub. These manifests may contain serialized LangChain objects and model configuration that affect runtime behavior. When pulling a public prompt by owner/name identifier, the manifest content is controlled by an external party, but prior versions of the SDK did not distinguish this from pulling a prompt within the caller's own organization. This vulnerability is fixed in LangSmith SDK Python 0.8.0 and JS/TS 0.6.0.

himmelblau-idm himmelblau

Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. From 2.0.0 to before 3.1.5 and 2.3.11, Himmelblau contained an authentication bypass vulnerability in the Device Authorization Grant (DAG) flow that allowed a user within the same Entra ID domain to obtain a local Unix session as another user by providing their own valid credentials. The vulnerability existed in the token_validate function, which validated domain aliases for legitimate multi-domain scenarios but failed to verify that the local part (username) of the authenticated user's UPN matched the requested account username. The function only compared domains, not the complete usernames. This vulnerability is fixed in 3.1.5 and 2.3.11.

MapServer · Osgeo mapserver

MapServer is a system for developing web-based GIS applications. From 6.4.0 to before 8.6.3, msSLDParseUserStyle always calls _SLDApplyRuleValues(psRule, psLayer, 1); for any <Rule> carrying <ElseFilter/> — it assumes msSLDParseRule added one class. When the rule has no symbolizer (a structurally valid SLD), msSLDParseRule adds zero, and _SLDApplyRuleValues ends up indexing _class[-1], resulting in a NULL pointer dereference. A 200-byte well-formed SLD via the WMS SLD_BODY= parameter is enough to trigger this, no auth required. This vulnerability is fixed in 8.6.3.

leiweibau Pi.Alert

Pi.Alert is a WIFI / LAN intruder detector with web service monitoring. From 2024-06-29 to before 2026-05-07, the web application endpoint is vulnerable to SQL injection. The /pialert/php/server/devices.php route accepts requests from unauthenticated users when the action URL parameter is set to getDevicesTotals. The scansource URL parameter is then injected in a SQL query. This vulnerability is fixed in 2026-05-07.

sebhildebrandt systeminformation · Red Hat Developer Hub 1.9 · Red Hat OpenShift AI 3.4 · Red Hat Cryostat 4

systeminformation is a System and OS information library for node.js. From 4.17.0 to 5.31.5, on Linux, systeminformation is vulnerable to command injection in networkInterfaces() when an active NetworkManager connection profile name contains shell metacharacters. The vulnerable value is obtained internally from real nmcli device status output. The library sanitizes the network interface name before using it in shell commands, but it does not apply equivalent sanitization to the parsed NetworkManager connection profile name. That unsanitized connectionName is then interpolated into three shell command strings executed through execSync(). This vulnerability is fixed in 5.31.6.

inducer relate

RELATE is a web-based courseware package. Versions prior to commit 555f0efb1c5bd7531c07cd73724d7e566a81f620 have a stored cross-site scripting vulnerability that allows any enrolled student to execute arbitrary JavaScript in an administrator's browser session, potentially leading to full admin account takeover. The `get_user()` method in `ParticipationAdmin` renders user-controlled input using `mark_safe` combined with Python's % string formatting. This bypasses Django\'s automatic HTML escaping entirely. The value returned by `get_full_name` is derived directly from the `first_name` and `last_name` fields of the User model. These fields are freely editable by any authenticated user through the profile page (`/profile/`) with no sanitization applied. When an admin views the Participation list in the Django admin panel, the unsanitized value is rendered directly into the HTML response, causing the injected script to execute in the admin's browser. Commit 555f0efb1c5bd7531c07cd73724d7e566a81f620 fixes the issue.

GitLab · Gitlab gitlab

GitLab has remediated an issue in GitLab EE affecting all versions from 18.8 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that, under certain conditions, could have allowed an authenticated user to cause specific Duo AI workflows to run under another user's identity due to improper user identity resolution when triggering Duo AI workflow runners.

kysely-org kysely

Kysely is a type-safe TypeScript SQL query builder. From 0.26.0 to 0.28.16, DefaultQueryCompiler.visitJSONPathLeg does not escape JSON-path metacharacters (., [, ], *, **, ?). When attacker-controlled input flows into eb.ref(col, '->$').key(input) or .at(input) — including type-safe code where the JSON column is shaped like Record<string, T> so K extends string is the inferred type — every dot becomes a path-leg separator, letting an attacker traverse from the intended key into sibling and child fields the developer never meant to expose. The result is read access (and, in update statements, write access) to JSON sub-fields outside the intended scope across MySQL, PostgreSQL ->$/->>$, and SQLite. This vulnerability is fixed in 0.28.17.

TP-Link Systems Inc. Archer BE7200 V1 · TP-Link Systems Inc. Archer BE450 v1 · Tp-link archer be450 firmware · Tp-link archer be7200 firmware

An authenticated command injection vulnerability exists in the Archer BE450 v1 and BE7200 v1 router that allows an administrator to execute arbitrary system commands through the web management interface. After successfully authenticating to the admin interface, an attacker can leverage the browser’s developer console by supplying a crafted input that is passed to backend system commands without adequate sanitization. Successful exploitation enables execution of arbitrary commands with elevated privileges on the device, which may allow the attacker to start unauthorized services, modify system configuration, or otherwise fully compromise the router’s operating environment.

budibase

Budibase is an open-source low-code platform. Prior to 3.39.0, fetchToken in the OAuth2 SDK makes a POST to a builder-supplied URL with plain node-fetch, skipping the blacklist.isBlacklisted check that every other outbound fetch path in the codebase uses. The Joi schema for the OAuth2 URL has no scheme or host restriction. This vulnerability is fixed in 3.39.0.

budibase

Budibase is an open-source low-code platform. Prior to 3.39.0, the single-datasource GET and PUT routes are guarded by generic TABLE READ, not by Builder/Admin permission or datasource-specific ownership/resource checks. The built-in Basic app user role maps to the WRITE permission set, which includes table read/write and query write. A Basic user can therefore read an existing REST datasource, receive redacted authConfigs values, submit an update that changes only config.url while keeping the redacted placeholders, and trigger an existing saved relative-path REST query. During update, mergeConfigs() restores the old stored secret when it sees the redaction placeholder. During query execution, Budibase prefixes the attacker-controlled datasource config.url to the relative query path and applies the resolved stored auth headers. The result is server-side disclosure of the builder-configured REST Authorization secret to an attacker-controlled listener. This vulnerability is fixed in 3.39.0.

budibase

Budibase is an open-source low-code platform. Prior to 3.39.0, the webhook schema-building endpoint is registered under builderRoutes, but the generic authorization middleware skips authorization for all paths matching /api/webhooks/schema. As a result, an unauthenticated caller can update the body schema for a known webhook and mutate the corresponding automation trigger output schema. This vulnerability is fixed in 3.39.0.

budibase

Budibase is an open-source low-code platform. Prior to 3.39.0, the Budibase Text component renders markdown by assigning marked.parse(markdown) straight to innerHTML with no sanitizer (packages/bbui/src/Markdown/MarkdownViewer.svelte:22). Any column a builder binds to a Text component in Markdown mode is a stored-XSS sink writable by every BASIC app user with WRITE on the underlying table. This vulnerability is fixed in 3.39.0.

budibase

Budibase is an open-source low-code platform. Prior to 3.39.0, the OAuth2 token fetch function in packages/server/src/sdk/workspace/oauth2/utils.ts uses raw fetch(config.url) with no SSRF protection. The safe wrapper fetchWithBlacklist() exists in the same codebase and is used in every other outbound HTTP call (automation steps, plugin downloads, object store), but was not applied to the OAuth2 token endpoint. A user with BUILDER role can point the OAuth2 token URL to internal services (CouchDB, cloud metadata) to exfiltrate sensitive data. This vulnerability is fixed in 3.39.0.

budibase

Budibase is an open-source low-code platform. Prior to 3.38.3, removeSecrets at packages/server/src/sdk/workspace/datasources/datasources.ts masks only datasource config fields whose schema type is DatasourceFieldType.PASSWORD. The Snowflake integration types its privateKey field as SENSITIVE_LONGFORM, which the filter skips. GET /api/datasources/:datasourceId lives on authorizedRoutes guarded by PermissionType.TABLE + PermissionLevel.READ. An authenticated BASIC user with any app role and call the endpoint and receive the full Snowflake PEM in plaintext. This vulnerability is fixed in 3.38.3.

budibase

Budibase is an open-source low-code platform. Prior to 3.38.2, the file upload endpoint POST /api/attachments/process does not enforce active-content restrictions for authenticated users. The checks for dangerous file extensions are conditionally wrapped inside if (isPublicUser) or if (isPublicUser || !env.SELF_HOSTED), meaning any authenticated builder can upload executable web content — SVG files with inline <script> tags, HTML pages with JavaScript, .js modules — which are then stored in the object store (MinIO/S3) with their correct MIME types. When the resulting signed URL is opened by any app user, the browser executes the payload. Impact is persistent stored XSS over all application end users. This vulnerability is fixed in 3.38.2.

budibase

Budibase is an open-source low-code platform. Prior to 3.38.1, Budibase exposes a REST API for datasource management. The route PUT /api/datasources/:datasourceId is registered in the authorizedRoutes group with TABLE/READ permission. This is the same authorization level as the read endpoint (GET /api/datasources/:datasourceId). Every authenticated Budibase app user with the BASIC built-in role or higher carries TABLE/WRITE (and therefore TABLE/READ) permissions, and the datasource update controller performs no additional builder check. As a result, any authenticated non-builder app user can submit a PUT request to rewrite a datasource's config object — including the connection host, port, database credentials, or the base url of a REST datasource. Because no network-level SSRF protection is applied to SQL driver connections, redirecting a PostgreSQL/MySQL/MongoDB datasource to an internal IP address succeeds and the attacker can probe or interact with internal services on arbitrary ports. This vulnerability is fixed in 3.38.1.

budibase

Budibase is an open-source low-code platform. Prior to 3.38.1, the POST /api/global/users/onboard endpoint is protected by workspaceBuilderOrAdmin middleware, allowing any user with builder permissions to access it. When SMTP email is not configured (the default for self-hosted Budibase instances), this endpoint bypasses the admin-restricted invite flow and directly creates users via bulkCreate, accepting arbitrary admin and builder role assignments from the request body. A builder-level user can create a new global admin account and receive the generated password in the response, achieving full privilege escalation. This vulnerability is fixed in 3.38.1.

budibase

Budibase is an open-source low-code platform. Prior to 3.38.1, the REST datasource integration (packages/server/src/integrations/rest.ts) follows HTTP redirects without re-checking the IP blacklist, allowing an authenticated Builder to access internal services (cloud metadata, databases) by redirecting through an attacker-controlled server. This vulnerability is fixed in 3.38.1.

budibase

Budibase is an open-source low-code platform. Prior to 3.34.8, the processUrlFile function in packages/server/src/automations/steps/ai/extract.ts uses fetch(fileUrl) directly without the IP blacklist validation that is consistently applied to all other automation steps. This allows an authenticated user to trigger server-side requests to internal network addresses. This vulnerability is fixed in 3.34.8.

hahwul dalfox

Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, ParameterAnalysis in pkg/scanning/parameterAnalysis.go runs two sequential worker stages that both write to the same results channel. The channel is correctly closed after the first stage completes (close(results) at line 438), but the second stage — which processes POST-body parameters (dp) — is then launched with the same already-closed channel as its output. When a scanned parameter is reflected, processParams executes results <- paramResult on the closed channel, triggering a Go runtime panic that crashes the entire dalfox process. In server mode, the crash is remotely triggerable by any unauthenticated caller who can reach the REST API, because the default configuration has no API key and the second stage activates whenever options.Data != "" (i.e., the attacker supplies the data field) and the target reflects at least one parameter. This vulnerability is fixed in 2.13.0.

hahwul dalfox

Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, when dalfox is run in REST API server mode, the output, output-all, and debug fields in model.Options are JSON-tagged and deserialized directly from the attacker's request body, then propagated unchanged through dalfox.Initialize into the scan engine's logging path. The logger opens the attacker-supplied path with os.O_APPEND|os.O_CREATE|os.O_WRONLY and writes scan log lines to it. Critically, this file write block lives outside the IsLibrary guard in DalLog, so it executes even in server/library mode where file output was never intended to operate. Because no API key is required in the default configuration, an unauthenticated network caller can create or append to any file writable by the dalfox process on the host filesystem. This vulnerability is fixed in 2.13.0.

hahwul dalfox

Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, when dalfox is run in REST API server mode, the custom-payload-file field in model.Options is JSON-tagged and deserialized directly from the attacker's request body, then propagated unchanged through dalfox.Initialize into the scan engine. The engine passes the value to voltFile.ReadLinesOrLiteral, which reads lines from any file path accessible to the dalfox process and embeds each line as an XSS payload in outbound HTTP requests directed at the attacker-controlled target URL. Because the server has no API key by default, an unauthenticated network attacker can exfiltrate the contents of arbitrary files on the dalfox host by reading them line-by-line through scan traffic. This vulnerability is fixed in 2.13.0.

budibase

Budibase is an open-source low-code platform. Prior to 3.35.10, the Plugin URL upload endpoint (POST /api/plugin) validates the submitted URL with a single substring check: url.includes(".tar.gz"). Any URL containing .tar.gz anywhere in the string — in the path, query string, or fragment — passes this check. The URL then proceeds directly to fetchWithBlacklist() with no further validation of host, scheme, or path. Standalone, this vulnerability is blocked by Budibase's default SSRF blacklist, which covers private IP ranges. But the URL validation layer itself is broken regardless, and it directly enables SSRF in two realistic situations: (1) when chained with the BLACKLIST_IPS bypass ([001]), where the blacklist is empty; and (2) when the plugin server follows HTTP redirects from an external URL to an internal target (the default node-fetch behavior with redirect: 'follow'). This vulnerability is fixed in 3.35.10.

xddxdd bird-lg-go

bird-lg-go is a BIRD looking glass in Go. Prior to 1.4.5, the apiHandler (and similarly webHandlerTelegramBot) processes user-provided JSON payloads by directly using json.NewDecoder(r.Body).Decode(&request) without restricting the maximum read size. An unauthenticated remote attacker can stream an extremely large, endless JSON payload (e.g., several Gigabytes of padding) over a single TCP connection. Because Go's JSON decoder attempts to allocate memory for the entire parsed structure, this rapidly exhausts the host's physical RAM or container limits, leading to an unrecoverable fatal error: runtime: out of memory. This vulnerability is fixed in 1.4.5.

Studio-42 elFinder

elFinder is an open-source file manager for web, written in JavaScript using jQuery UI. Prior to 2.1.68, an authenticated SQL injection vulnerability in the elFinder MySQL volume driver (elFinderVolumeMySQL) allows any logged-in user, including users with read-only access to the affected volume, to inject SQL through a crafted target file hash. Successful exploitation can lead to unauthorized data disclosure and denial of service. This vulnerability only affects installations configured to use the MySQL volume driver. This vulnerability is fixed in 2.1.68.

error311 FileRise

FileRise is a self-hosted web-based file manager with multi-file upload, editing, and batch operations. Prior to 3.12.0, /api/totp_setup.php is callable from a session that has only passed the password check (state pending_login_user). When the target account already has TOTP configured, the endpoint decrypts and returns the user's existing TOTP secret inside the QR PNG instead of refusing or generating a new secret. An attacker who already possesses the victim's password can therefore retrieve the live TOTP secret, derive a valid one-time code, submit it to /api/totp_verify.php, and obtain a fully authenticated session without ever possessing the victim's authenticator device. This vulnerability is fixed in 3.12.0.

randombit botan · Botan project botan

Botan is a C++ cryptography library. Prior to 3.12.0, certain patterns of indefinite length encodings in BER data could cause quadratic behavior in the parser, resulting in a denial of service. Such BER encodings were accepted even in structures which are required to be encoded as DER, which prohibits indefinite length encodings. This vulnerability is fixed in 3.12.0.

BentoML · Bentoml bentoml

BentoML is a Python library for building online serving systems optimized for AI apps and model inference. Prior to 1.4.39, a malicious bentofile.yaml containing a newline-injected value in envs[*].name produces unquoted RUN directives in the BentoML-generated Dockerfile. When the victim runs bentoml containerize on the imported bento, those RUN directives execute on the host during docker build. This vulnerability is fixed in 1.4.39.

BentoML · Bentoml bentoml

BentoML is a Python library for building online serving systems optimized for AI apps and model inference. Prior to 1.4.39, src/bentoml/_internal/container/frontend/dockerfile/templates/base_v2.j2 interpolates docker.base_image raw with no escaping, newline filtering, or validation. A malicious bento.yaml with a multi-line docker.base_image value smuggles arbitrary Dockerfile directives into the generated Dockerfile, and bentoml containerize then runs docker build which executes the injected RUN directives on the victim host. This vulnerability is fixed in 1.4.39.

cinnyapp cinny

Cinny is a Matrix client. Prior to 4.10.3, A remote authenticated attacker who shares a room with a victim and has permissions to create room emotes (for example in a DM) can cause the victim's client to send their Matrix access token to an attacker-controlled server. This occurs when the victim opens the emoji or sticker picker for the room containing a malicious emote pack. This is caused by an incorrect fallback in EmojiBoard that uses untrusted pack.meta.avatar (user-controlled) without converting/validating it as an MXC URL, allowing arbitrary HTTP(S) URLs to be used. Also, the service worker attaching the user's Authorization bearer token to all outbound GET requests whose URL contains /_matrix/client/v1/media/download or /_matrix/client/v1/media/thumbnail without verifying the request host matches the configured homeserver origin. An attacker-controlled URL containing those path fragments and permissive CORS will receive the victim's Authorization header (access token). This vulnerability is fixed in 4.10.3.

Insecure Permissions vulnerability in kvf-admin v1.0.0 allows a remote attacker to escalate privileges via the UserController.java component

Command injection in Raynet rvia RayVentory Scan Engine 12.6 Update 8 and previous versions allows adversaries to execute commands via getconfig, upload, inventory, and oracle options.

airjp73 rvf · @rvf set-get

RVF (formerly Remix Validated Form) provides easy form validation and state management for React. From 6.0.0 to before 6.0.4 and 7.0.2, setPath in @rvf/set-get (used by @rvf/core to flatten incoming form data into a nested object) does not block the keys __proto__, constructor, or prototype when walking a path. Because field names in submitted form data are passed directly to setPath via preprocessFormData (and through parseFormData / validate), an attacker who can submit a form to a Remix / React Router app using the library can set arbitrary properties on Object.prototype of the running server process. This is a default-reachable prototype pollution primitive: no special configuration is required. Any endpoint that accepts a form via parseFormData or runs a validator created with createValidator is affected. This vulnerability is fixed in 6.0.4 and 7.0.2.

ellanetworks core

Ella Core is a 5G core designed for private networks. Prior to 1.10.0, a radio with a valid NG Setup can send a forged PDUSessionResourceSetupResponse carrying any UE's AMF-UE-NGAP-ID. Ella Core does not verify the message arrived on the SCTP association bound to that UE's logical NG-connection, then creates a GTP tunnel towards that radio. This vulnerability is fixed in 1.10.0.

free5gc · Free5gc free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's SMF mounts the UPI management route group without inbound OAuth2 middleware. On top of that, the DELETE /upi/v1/upNodesLinks/{upNodeRef} handler unconditionally dereferences upNode.UPF after the type-guarded async release, even though AN-typed nodes are constructed without a UPF object. As a result, a single unauthenticated DELETE /upi/v1/upNodesLinks/gNB1 request crashes the handler with a nil-pointer panic AND mutates the in-memory user-plane topology before panicking (the UpNodeDelete(upNodeRef) line runs first). This is an unauthenticated, state-mutating panic-DoS sink that an off-path network attacker can trigger by name against any AN entry. This vulnerability is fixed in 4.2.2.

free5gc · Free5gc free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NRF root SBI endpoint POST /oauth2/token contains a parser-level type-confusion bug family. The handler in NFs/nrf/internal/sbi/api_accesstoken.go reflects over models.NrfAccessTokenAccessTokenReq, special-cases only plain string and NrfNfManagementNfType fields, and treats every other field as if it were a single models.PlmnId. The parsed *models.PlmnId is then assigned with reflect.Value.Set() to whichever field name the attacker put in the form body, which panics whenever the destination field's real type is incompatible (slice, different struct, primitive). Gin recovery converts each panic into HTTP 500, but the endpoint remains remotely panicable from a single unauthenticated form-encoded request and is repeatedly triggerable. This vulnerability is fixed in 4.2.2.

free5gc · Free5gc free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NEF PATCH /3gpp-pfd-management/v1/{afId}/transactions/{transId}/applications/{appId} handler panics with a nil-pointer dereference when the upstream UDR call fails AND the consumer wrapper returns err != nil together with a nil *ProblemDetails. The handler's errPfdData != nil branch builds its own problemDetailsErr correctly, but immediately after it reads problemDetails.Cause (the OTHER value, which is nil in this branch) and panics. Gin recovery converts the panic into HTTP 500, so a single PATCH against this endpoint returns 500 instead of the intended controlled error response whenever UDR access is failing. This vulnerability is fixed in 4.2.2.

free5gc · Free5gc free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's SMF mounts the UPI management route group without inbound OAuth2 middleware. The POST /upi/v1/upNodesLinks create-or-update handler accepts attacker-controlled JSON and passes it directly into UpNodesFromConfiguration(), which calls logger.InitLog.Fatalf(...) on several validation failures. One confirmed path is the UE-IP-pool overlap check: a single unauthenticated POST that adds a new UPF whose pool overlaps an existing UPF terminates the entire SMF process (docker ps shows Exited (1)), not just the goroutine. This vulnerability is fixed in 4.2.2.

free5gc · Free5gc free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NEF mounts the nnef-callback route group without inbound OAuth2/bearer-token authorization. A forged or arbitrary bearer token (e.g. Authorization: Bearer not-a-real-token) is enough to reach the SMF-callback handler -- the callback body is parsed and dispatched into NEF business logic instead of being rejected at the auth boundary. Same root cause as the other NEF SBI findings: the route group is mounted without any inbound auth middleware. NEF does not authenticate the producer NF identity before processing callback content; if an attacker can guess or obtain a valid NotifId, this missing auth boundary lets forged callbacks act on real subscription state. The route group is also reachable even when the runtime ServiceList does not declare it (it lists only nnef-pfdmanagement and nnef-oam). This vulnerability is fixed in 4.2.2.

free5gc · Free5gc free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NEF terminates the entire process when a stored PFD-subscription notifyUri cannot be reached. In PfdChangeNotifier.FlushNotifications(), the notifier calls NnefPFDmanagementNotify(...) and on any delivery error invokes logger.PFDManageLog.Fatal(err), which is os.Exit(1)-equivalent in Go. An attacker who can create a PFD subscription with an attacker-chosen notifyUri and then trigger a PFD change can deterministically kill NEF on the asynchronous delivery attempt -- the process exits with status 1, dropping NEF's entire SBI surface until restart. This vulnerability is fixed in 4.2.2.

free5gc · Free5gc free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's PCF POST /npcf-smpolicycontrol/v1/sm-policies handler (HandleCreateSmPolicyRequest) panics with a nil-pointer dereference when a downstream OpenAPI consumer call (UDR lookup) returns 404 Not Found and the consumer wrapper returns err != nil together with a nil response struct. The handler logs the OpenAPI error and continues executing instead of returning, then dereferences the nil response struct on a subsequent line and panics. Gin recovery converts the panic into HTTP 500, so a single attacker-shaped POST returns 500 instead of a clean 4xx whenever the downstream lookup fails. The PCF process keeps running. The trigger is a single POST containing input that causes the downstream UDR lookup to fail (e.g. an unknown DNN). In 4.2.1 this endpoint is also reachable WITHOUT an Authorization header because the PCF Npcf_SMPolicyControl route group is mounted without inbound auth middleware. This vulnerability is fixed in 4.2.2.

Erlang OTP · Red Hat OpenStack Platform 16.2 · Red Hat OpenStack Services on OpenShift 18.0 · Red Hat Hardened Images

Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_cert and public_key modules) allows a DNS nameConstraints bypass via subject CommonName fallback in TLS hostname verification. Two flaws combine to allow a subordinate CA whose DNS nameConstraints are restricted (e.g. permitted;DNS:allowed.example.com) to issue a leaf certificate that an OTP TLS client accepts as a valid identity for an out-of-scope hostname (e.g. victim.example.com): First, pubkey_cert:validate_names/6 in lib/public_key/src/pubkey_cert.erl only checks SAN DNS entries against nameConstraints. Per RFC 5280, a permitted DNS subtree only restricts certificates that contain a DNS-typed name. A leaf with no subjectAltName therefore trivially satisfies any permitted;DNS:... constraint regardless of its subject commonName. Second, public_key:pkix_verify_hostname/3 in lib/public_key/src/public_key.erl falls back to the subject commonName when no subjectAltName is present, extracting id-at-commonName attributes as presented IDs and matching them against the reference hostname. The strict pkix_verify_hostname_match_fun(https) matcher does not suppress this fallback. The result is that path validation accepts a CN-only leaf under a DNS-constrained intermediate (no SAN means the nameConstraints are not triggered), and hostname verification then accepts it via the CN fallback. The bypass is reachable from stock ssl:connect with verify_peer, a trusted CA, SNI, and the canonical strict https hostname matcher. This issue affects OTP from OTP 19.3 before OTP 29.0.1, OTP 28.5.0.1, OTP 27.3.4.12 and OTP 26.2.5.21, corresponding to public_key from 1.4 before 1.21.1, 1.20.3.1, 1.17.1.3 and 1.15.1.7.

free5gc · Free5gc free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, the free5GC UDM component fails to validate the supi path parameter in six GET handlers of the nudm-sdm (Subscriber Data Management) service. An unauthenticated attacker can inject control characters into the SUPI parameter, causing UDM to forward a malformed request to UDR and return a 500 Internal Server Error response that exposes internal infrastructure details. This vulnerability is fixed in 4.2.2.

free5gc · Free5gc free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, PCF Npcf_SMPolicyControl missing authentication middleware allows unauthenticated access to SM policy handlers and disclosure of subscriber SUPI. In NewServer(), the smPolicyGroup route group is created and routes are applied without attaching the router authorization middleware. In contrast, other PCF service groups such as Npcf_PolicyAuthorization do attach RouterAuthorizationCheck before route registration. Because the middleware is missing, requests to the /npcf-smpolicycontrol/v1/sm-policies, /npcf-smpolicycontrol/v1/sm-policies/{smPolicyId}, /npcf-smpolicycontrol/v1/sm-policies/{smPolicyId}/update, and /npcf-smpolicycontrol/v1/sm-policies/{smPolicyId}/delete endpoints can reach business logic even when no valid OAuth token is provided. This vulnerability is fixed in 4.2.2.

free5gc · Free5gc free5gc

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, the AMF in Free5GC does not verify the UE Security Capabilities received in NGAP PathSwitchRequest messages against its locally stored values, as mandated by 3GPP TS 33.501 §6.7.3.1. A malicious gNB can overwrite the AMF's stored UE security capabilities with arbitrary values, which are then propagated in PathSwitchRequest Acknowledge messages and subsequent Handover Request messages. This leads to persistent handover denial-of-service for affected UEs. This vulnerability is fixed in 4.2.2.

Command injection in Raynet rvia version 12.6 Update 8 and previous versions allows adversaries to execute arbitrary code via a crafted path that matches the improperly terminated search criteria of rvia's Java search using the find command.

Arjun Thakur Duplicate Page and Post

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Arjun Thakur Duplicate Page and Post allows Blind SQL Injection. This issue affects Duplicate Page and Post: from n/a through 2.9.5.

Jenkins Project Jenkins Credentials Binding Plugin · Jenkins credentials binding

Jenkins Credentials Binding Plugin 720.v3f6decef43ea_ and earlier does not properly sanitize file names for file and zip file credentials, allowing attackers able to provide credentials to a job to write files to arbitrary locations on the node filesystem, which can lead to remote code execution if Jenkins is configured to allow a low-privileged user to configure file or zip file credentials used for a job running on the built-in node.

Jenkins Project Jenkins Pipeline: Groovy Libraries Plugin · Jenkins pipeline\

Jenkins Pipeline: Groovy Libraries Plugin 797.v90ea_a_9b_e45a_0 and earlier does not prohibit symbolic links in shared libraries, allowing attackers able to control the content of a library used by a Pipeline job to read arbitrary files on the Jenkins controller filesystem.

Jenkins Project Jenkins Email Extension Plugin · Jenkins email extension

Jenkins Email Extension Plugin 1933.v45cec755423f and earlier allows inlining images as `base64` in email content by setting the `data-inline` attribute, without restrictions on the image URLs that can be inlined, allowing attackers able to control the email content to specify `file:` URLs for images to read arbitrary files from the Jenkins controller filesystem.

Avaiga taipy

Taipy 4.1.1, fixed in commit 129fd40, contains a path traversal vulnerability in the ElementLibrary.get_resource() method in taipy/gui/extension/library.py that allows unauthenticated attackers to escape the intended module directory by exploiting an incomplete path containment check using str.startswith() without a trailing path separator. Attackers can send crafted GET requests with path traversal segments targeting a prefix-matching sibling directory on disk, bypassing the directory containment check because Flask's path converter and Werkzeug's WSGI layer preserve the traversal segments while the resolved path still satisfies the flawed startswith comparison, enabling unauthorized file access outside the intended library directory.

go-git · Go-git project go-git

go-git is an extensible git implementation library written in pure Go. Prior to 5.19.0 and 6.0.0-alpha.3, go-git may parse malformed Git objects in a way that differs from upstream Git. When commit or tag objects contain ambiguous or malformed headers, go-git’s decoded representation may expose values differently from how Git itself would interpret or reject the same object. Additionally, go-git’s commit signing and verification logic operates over commit data reconstructed from go-git’s parsed representation rather than the original raw object bytes. As a result, go-git may sign or verify a commit payload that is not byte-for-byte equivalent to the object stored in the repository. This can cause a signature to appear valid for a commit whose displayed or effective metadata differs from the object that was intended to be signed. This vulnerability is fixed in 5.19.0 and 6.0.0-alpha.3.

libvncserver

LibVNCClient is a library for easy implementation of a VNC client. In 0.9.15 and earlier, LibVNCClient's Tight encoding decoder uses fixed-size 2048-pixel scratch buffers for the Gradient filter, but it does not reject Tight rectangles whose width is larger than 2048 pixels. A malicious VNC server can send a crafted FramebufferUpdate rectangle using Tight encoding with NoZlib | ExplicitFilter and the Gradient filter. When a LibVNCClient-based client connects, the client processes the server-controlled rectangle width and writes beyond fixed-size Gradient buffers. This vulnerability is fixed with commit 5b270544b85233668b98161323297d418a8f5fd1.

DataDog guarddog

GuardDog is a CLI tool to identify malicious PyPI packages. From 1.0.0 to 2.9.0, the programmatic remote project scanning path rewrites attacker-controlled repository URLs using a blind string replacement and then sends the caller's GitHub credentials with the resulting request. This allows an attacker who can influence the scanned repository URL to trigger SSRF and capture the GH_TOKEN used by GuardDog. This vulnerability is fixed in .

open-telemetry opentelemetry-js · @opentelemetry exporter-prometheus · @opentelemetry sdk-node · @opentelemetry auto-instrumentations-node

opentelemetry-js is the OpenTelemetry JavaScript Client. Prior to 0.217.0, a single malformed HTTP request crashes any Node.js process running the OpenTelemetry JS Prometheus exporter. The metrics endpoint (default 0.0.0.0:9464) has no error handling around URL parsing, so a request with an invalid URI causes an uncaught TypeError that terminates the process. This vulnerability is fixed in 0.217.0.

rabbitmq-server · Broadcom rabbitmq server

RabbitMQ is a messaging and streaming broker. From 4.2.0 to before 4.2.4, RabbitMQ's MQTT plugin allows for topic-level authorization using regular expressions with variable substitution. Administrators can create patterns such as ^{client_id}-sensors$ to restrict user access to topics that include their client ID. However, the client_id is provided by the user in the MQTT CONNECT packet and is inserted into the regex pattern without escaping special regex characters. This flaw enables an authenticated MQTT user to inject regex operators to bypass authorization. This vulnerability is fixed in 4.2.4 and 4.3.0.

Dataojitori nocturne_memory

Nocturne Memory is a lightweight, rollbackable, and visual Long-Term Memory Server for MCP Agents. Prior to 2.4.1, when API_TOKEN is unset or empty, the BearerTokenAuthMiddleware bypasses authentication for all HTTP requests. Combined with the default 0.0.0.0 host binding and CORS allow_origins=["*"], operators following the Docker setup without explicitly setting API_TOKEN expose the full Knowledge-Graph read/write API to any LAN-reachable client. An attacker on the same network can read, write, or delete all memory entries — including system://boot and core://* URIs that auto-load into downstream agent sessions, enabling persistent prompt-injection. This vulnerability is fixed in 2.4.1.

auth0.js · Auth0 auth0.js

Auth0.js is a client-side JavaScript library for Auth0. From 8.11.0 to 9.32.0, under specific preconditions, the Auth0.js SDK may improperly return user profile information using a valid access token when a specifically crafted invalid ID token is provided. This vulnerability is fixed in 10.0.0.

tauri-apps tauri · Tauri tauri

Tauri is a framework for building binaries for all major desktop platforms. From 2.0 to 2.11.0, a flaw in Tauri's is_local_url() function causes it to incorrectly classify remote URLs as trusted local origins on Windows and Android. On these systems, Tauri maps custom URI scheme protocols to http://<scheme>.localhost/ because those platforms' WebView implementations cannot serve custom URI schemes directly. The issue is that Tauri's check to see if the origin is local, only checks the first subdomain of the URL. An attacker can abuse this by hosting a page on a domain whose subdomain matches the custom scheme of the application. This vulnerability is fixed in 2.10.3.

An issue in Dolibarr ERP/CRM v.22.0.0 through v.22.0.4 and v.24.0.0-alpha allows a remote attacker to execute arbitrary code via the htdocs/core/class/commonobject.class.php.

An issue in Dolibarr ERP/CRM v.22.0.0 through v.22.0.4 and v.24.0.0-alpha allows a remote attacker to execute arbitrary code via the htdocs/cron/class/cronjob.class.php, call_user_func_array() in function job type

An issue in Dolibarr ERP/CRM v.22.0.0 through v.22.0.4 and v.24.0.0-alpha allows a remote attacker to execute arbitrary code via the htdocs/core/actions_addupdatedelete.inc.php

Craft CMS 5.9.5 and earlier contains a Missing Authorization vulnerability in the migrate endpoint (/actions/app/migrate).

Heap buffer overflow vulnerability in libjxl 0.12.0 via crafted PBM images to the jxl::extras::DecodeImagePNM function in file lib/extras/dec/pnm.cc.

Red Hat build of Keycloak 26.4 · Red Hat build of Keycloak 26.4.13 · Red Hat build of Keycloak 26.6 · Red Hat build of Keycloak 26.6.3

A flaw was found in Keycloak. An authenticated user with low privileges can exploit this vulnerability by sending an oversized subject_token JSON Web Token (JWT) to the TokenEndpoint. When the token exceeds a 4000-character limit, it is silently dropped, causing the system to fall back to client credentials. This allows the user to gain the permissions of the client's service account, leading to privilege escalation.

DALIBO PostgreSQL Anonymizer · Dalibo anonymizer

PostgreSQL Anonymizer contains a vulnerability that allows a user to gain superuser privileges by creating a table and placing malicious code inside a column identifier. If a superuser calls the k-anonymity function, the malicious code is executed with superuser privileges. The risk is higher with PostgreSQL 14 or with instances upgraded from PostgreSQL 14 or a prior version. With PostgreSQL 15 and later, the creation permission on the public schema is revoked by default and this exploit can only be achieved by a user who was explicitly granted the CREATE TABLE privilege. The problem is resolved in PostgreSQL Anonymizer 3.1.0 and further versions

IBM Aspera High-Speed Transfer Endpoint · IBM Aspera High-Speed Transfer Server

IBM Aspera High-Speed Transfer Endpoint 3.7.4 through 4.4.7 Fix Pack 1 and IBM Aspera High-Speed Transfer Server 3.7.4 through 4.4.7 Fix Pack 1 and IBM Aspera High-Speed Transfer Endpoint are affected by a potential denial of service in the asperahttpd component. An unauthenticated user can cause the asperahttpd service to crash.

IBM Aspera High-Speed Transfer Endpoint · IBM Aspera High-Speed Transfer Server

IBM Aspera High-Speed Transfer Endpoint 3.7.4 through 4.4.7 Fix Pack 1 and IBM Aspera High-Speed Transfer Server 3.7.4 through 4.4.7 Fix Pack 1 and IBM Aspera High-Speed Transfer Endpoint are affected by a buffer overflow in the asperahttpd component. This vulnerability could allow an authenticated user to execute arbitrary code on the system.

IBM Langflow OSS · Langflow langflow

IBM Langflow OSS 1.0.0 through 1.9.0 could allow a denial of service due to uncontrolled resource consumption.

IBM Operations Analytics - Log Analysis · Ibm operations analytics log analysis

IBM Operations Analytics - Log Analysis  and IBM SmartCloud Analytics - Log Analysis uses default passwords default passwords from the manufacturing process for use during the installation process, which could allow an attacker to bypass authentication.

IBM Db2

IBM Db2 12.1.0 through 12.1.4 is vulnerable to authorization bypass when uploading to a remote object storage path with a special query.

IBM Db2

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to running out of memory when executing certain queries with MDC tables.

IBM Db2

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when executing a specially crafted query with a small statement heap.

IBM Controller

IBM Controller 11.0.1, 11.1.0, 11.1.1, and 11.1.2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

SeedProd LLC SeedProd Pro

Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in SeedProd LLC SeedProd Pro allows PHP Local File Inclusion. This issue affects SeedProd Pro: from n/a before 6.19.5.

IBM WebSphere Application Server - Liberty · IBM WebSphere Application Server

IBM WebSphere Application Server - Liberty 19.0.0.7 through 26.0.0.5 and IBM WebSphere Application Server 9.0, and 8.5 and WebSphere Application Server Liberty are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: strparser: fix skb_head leak in strp_abort_strp() When the stream parser is aborted, for example after a message assembly timeout, it can still hold a reference to a partially assembled message in strp->skb_head. That skb is not released in strp_abort_strp(), which leaks the partially assembled message and can be triggered repeatedly to exhaust memory. Fix this by freeing strp->skb_head and resetting the parser state in the abort path. Leave strp_stop() unchanged so final cleanup still happens in strp_done() after the work and timer have been synchronized.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fs: afs: revert mmap_prepare() change Partially reverts commit 9d5403b1036c ("fs: convert most other generic_file_*mmap() users to .mmap_prepare()"). This is because the .mmap invocation establishes a refcount, but .mmap_prepare is called at a point where a merge or an allocation failure might happen after the call, which would leak the refcount increment. Functionality is being added to permit the use of .mmap_prepare in this case, but in the interim, we need to fix this.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels seg6_input_core() and rpl_input() call ip6_route_input() which sets a NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking dst_hold() unconditionally. On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can release the underlying pcpu_rt between the lookup and the caching through a concurrent FIB lookup on a shared nexthop. Simplified race sequence: ksoftirqd/X higher-prio task (same CPU X) ----------- -------------------------------- seg6_input_core(,skb)/rpl_input(skb) dst_cache_get() -> miss ip6_route_input(skb) -> ip6_pol_route(,skb,flags) [RT6_LOOKUP_F_DST_NOREF in flags] -> FIB lookup resolves fib6_nh [nhid=N route] -> rt6_make_pcpu_route() [creates pcpu_rt, refcount=1] pcpu_rt->sernum = fib6_sernum [fib6_sernum=W] -> cmpxchg(fib6_nh.rt6i_pcpu, NULL, pcpu_rt) [slot was empty, store succeeds] -> skb_dst_set_noref(skb, dst) [dst is pcpu_rt, refcount still 1] rt_genid_bump_ipv6() -> bumps fib6_sernum [fib6_sernum from W to Z] ip6_route_output() -> ip6_pol_route() -> FIB lookup resolves fib6_nh [nhid=N] -> rt6_get_pcpu_route() pcpu_rt->sernum != fib6_sernum [W <> Z, stale] -> prev = xchg(rt6i_pcpu, NULL) -> dst_release(prev) [prev is pcpu_rt, refcount 1->0, dead] dst = skb_dst(skb) [dst is the dead pcpu_rt] dst_cache_set_ip6(dst) -> dst_hold() on dead dst -> WARN / use-after-free For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release the pcpu_rt. Shared nexthop objects provide such a path, as two routes pointing to the same nhid share the same fib6_nh and its rt6i_pcpu entry. Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after ip6_route_input() to force the NOREF dst into a refcounted one before caching. The output path is not affected as ip6_route_output() already returns a refcounted dst.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Input: edt-ft5x06 - fix use-after-free in debugfs teardown The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs directory") removed the manual debugfs teardown, relying on the I2C core to handle it. However, this creates a window where debugfs files are still accessible after edt_ft5x06_ts_teardown_debugfs() frees tsdata->raw_buffer. To prevent a use-after-free, protect the freeing of raw_buffer with the device mutex and set raw_buffer to NULL. The debugfs read function already checks if raw_buffer is NULL under the same mutex, so this safely avoids the use-after-free.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access The bounds check for the next xattr entry in check_xattrs() uses (void *)next >= end, which allows next to point within sizeof(u32) bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4 bytes via *(__u32 *)(entry), which can overrun the valid xattr region. For example, if next lands at end - 1, the check passes since next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1, accessing 3 bytes beyond the valid region. Fix this by changing the check to (void *)next + sizeof(u32) > end, ensuring there is always enough space for the IS_LAST_ENTRY() read on the subsequent iteration.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: take vmap_purge_lock in shrinker decay_va_pool_node() can be invoked concurrently from two paths: __purge_vmap_area_lazy() when pools are being purged, and the shrinker via vmap_node_shrink_scan(). However, decay_va_pool_node() is not safe to run concurrently, and the shrinker path currently lacks serialization, leading to races and possible leaks. Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker path to ensure serialization with purge users.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 7 Extended Lifecycle Support

In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix peer runtime UAF during format-change stop loopback_check_format() may stop the capture side when playback starts with parameters that no longer match a running capture stream. Commit 826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved the peer lookup under cable->lock, but the actual snd_pcm_stop() still runs after dropping that lock. A concurrent close can clear the capture entry from cable->streams[] and detach or free its runtime while the playback trigger path still holds a stale peer substream pointer. Keep a per-cable count of in-flight peer stops before dropping cable->lock, and make free_cable() wait for those stops before detaching the runtime. This preserves the existing behavior while making the peer runtime lifetime explicit.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxkad crypto unalignment handling Fix handling of a packet with a misaligned crypto length. Also handle non-ENOMEM errors from decryption by aborting. Further, remove the WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can still be emitted).

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: Disable RX steering on RSS QP destroy When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss() destroys the RX WQ objects but does not disable vPort RX steering in firmware. This leaves stale steering configuration that still points to the destroyed RX objects. If traffic continues to arrive (e.g. peer VM is still transmitting) and the VF interface is subsequently brought up (mana_open), the firmware may deliver completions using stale CQ IDs from the old RX objects. These CQ IDs can be reused by the ethernet driver for new TX CQs, causing RX completions to land on TX CQs: WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false) WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails) Fix this by disabling vPort RX steering before destroying RX WQ objects. Note that mana_fence_rqs() cannot be used here because the fence completion is delivered on the CQ, which is polled by user-mode (e.g. DPDK) and not visible to the kernel driver. Refactor the disable logic into a shared mana_disable_vport_rx() in mana_en, exported for use by mana_ib, replacing the duplicate code. The ethernet driver's mana_dealloc_queues() is also updated to call this common function.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: acomp - fix wrong pointer stored by acomp_save_req() acomp_save_req() stores &req->chain in req->base.data. When acomp_reqchain_done() is invoked on asynchronous completion, it receives &req->chain as the data argument but casts it directly to struct acomp_req. Since data points to the chain member, all subsequent field accesses are at a wrong offset, resulting in memory corruption. The issue occurs when an asynchronous hardware implementation, such as the QAT driver, completes a request that uses the DMA virtual address interface (e.g. acomp_request_set_src_dma()). This combination causes crypto_acomp_compress() to enter the acomp_do_req_chain() path, which sets acomp_reqchain_done() as the completion callback via acomp_save_req(). With KASAN enabled, this manifests as a general protection fault in acomp_reqchain_done(): general protection fault, probably for non-canonical address 0xe000040000000000 KASAN: probably user-memory-access in range [0x0000400000000000-0x0000400000000007] RIP: 0010:acomp_reqchain_done+0x15b/0x4e0 Call Trace: <IRQ> qat_comp_alg_callback+0x5d/0xa0 [intel_qat] adf_ring_response_handler+0x376/0x8b0 [intel_qat] adf_response_handler+0x60/0x170 [intel_qat] tasklet_action_common+0x223/0x820 handle_softirqs+0x1ab/0x640 </IRQ> Fix this by storing the request itself in req->base.data instead of &req->chain, so that acomp_reqchain_done() receives the correct pointer. Simplify acomp_restore_req() accordingly to access req->chain directly.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: erofs: fix the out-of-bounds nameoff handling for trailing dirents Currently we already have boundary-checks for nameoffs, but the trailing dirents are special since the namelens are calculated with strnlen() with unchecked nameoffs. If a crafted EROFS has a trailing dirent with nameoff >= maxsize, maxsize - nameoff can underflow, causing strnlen() to read past the directory block. nameoff0 should also be verified to be a multiple of `sizeof(struct erofs_dirent)` as well [1]. [1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs]

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path Unregister the hwrng to prevent new ->read() calls and flush the Atmel I2C workqueue before teardown to prevent a potential UAF if a queued callback runs while the device is being removed. Drop the early return to ensure sysfs entries are removed and ->hwrng.priv is freed, preventing a memory leak.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: md/raid5: validate payload size before accessing journal metadata r5c_recovery_analyze_meta_block() and r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a journal metadata block using on-disk payload size fields without validating them against the remaining space in the metadata block. A corrupted journal contains payload sizes extending beyond the PAGE_SIZE boundary can cause out-of-bounds reads when accessing payload fields or computing offsets. Add bounds validation for each payload type to ensure the full payload fits within meta_size before processing.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup() The mwifiex_adapter_cleanup() function uses timer_delete() (non-synchronous) for the wakeup_timer before the adapter structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If the wakeup_timer callback (wakeup_timer_fn) is executing when mwifiex_adapter_cleanup() is called, the callback will continue to access adapter fields (adapter->hw_status, adapter->if_ops.card_reset, etc.) which may be freed by mwifiex_free_adapter() called later in the mwifiex_remove_card() path. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx The bounce buffers are allocated with __get_free_pages() using BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error path and nx842_crypto_free_ctx() release the buffers with free_page(). Use free_pages() with the matching order instead.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp Users can set damos_quota_goal->nid with arbitrary value for node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA() without a validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo mkdir /sys/fs/cgroup/foo $ sudo ./damo start --damos_action stat --damos_quota_interval 1s \ --damos_quota_goal node_memcg_used_bp 50% -1 /foo $ sudo dmseg [...] [ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00 Fix this issue by adding the validation of the given node id. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an instance as part of initializing deferred I/O and remove it only after the final mapping has been closed. If the fb_info and the contained deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info to invalidate the mapping. Any access will then result in a SIGBUS signal. Fixes a long-standing problem, where a device hot-unplug happens while user space still has an active mapping of the graphics memory. The hot- unplug frees the instance of struct fb_info. Accessing the memory will operate on undefined state.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix heap over-read in ibmasm_send_i2o_message() The ibmasm_send_i2o_message() function uses get_dot_command_size() to compute the byte count for memcpy_toio(), but this value is derived from user-controlled fields in the dot_command_header (command_size: u8, data_size: u16) and is never validated against the actual allocation size. A root user can write a small buffer with inflated header fields, causing memcpy_toio() to read up to ~65 KB past the end of the allocation into adjacent kernel heap, which is then forwarded to the service processor over MMIO. Silently clamping the copy size is not sufficient: if the header fields claim a larger size than the buffer, the SP receives a dot command whose own header is inconsistent with the I2O message length, which can cause the SP to desynchronize. Reject such commands outright by returning failure. Validate command_size before calling get_mfa_inbound() to avoid leaking an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware frame from the controller's free pool, and returning without a corresponding set_mfa_inbound() call would permanently exhaust it. Additionally, clamp command_size to I2O_COMMAND_SIZE before the memcpy_toio() so the MMIO write stays within the I2O message frame, consistent with the clamping already performed by outgoing_message_size() for the header field.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix integer overflow in run_unpack() volume boundary check The volume boundary check `lcn + len > sbi->used.bitmap.nbits` uses raw addition which can wrap around for large lcn and len values, bypassing the validation. Use check_add_overflow() as is already done for the adjacent prev_lcn + dlcn and vcn64 + len checks added by commit 3ac37e100385 ("ntfs3: Fix integer overflow in run_unpack()"). Found by fuzzing with a source-patched harness (LibAFL + QEMU).

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: media: amphion: Fix race between m2m job_abort and device_run Fix kernel panic caused by race condition where v4l2_m2m_ctx_release() frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run with the same context. Race sequence: v4l2_m2m_try_run(): v4l2_m2m_ctx_release(): lock/unlock v4l2_m2m_cancel_job() job_abort() v4l2_m2m_job_finish() kfree(m2m_ctx) <- frees ctx device_run() <- use-after-free crash at 0x538 Crash trace: Unable to handle kernel read from unreadable memory at virtual address 0000000000000538 v4l2_m2m_try_run+0x78/0x138 v4l2_m2m_device_run_work+0x14/0x20 The amphion vpu driver does not rely on the m2m framework's device_run callback to perform encode/decode operations. Fix the race by preventing m2m framework job scheduling entirely: - Add job_ready callback returning 0 (no jobs ready for m2m framework) - Remove job_abort callback to avoid the race condition

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix potential UAF in SSP passkey handlers hci_conn lookup and field access must be covered by hdev lock in hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise the connection can be freed concurrently. Extend the hci_dev_lock critical section to cover all conn usage in both handlers. Keep the existing keypress notification behavior unchanged by routing the early exits through a common unlock path.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix string overrun due to missing termination When booting Ubuntu 26.04 with Linux 7.0-rc4 on an ARM64 Qualcomm Snapdragon X1 we see a string buffer overrun: BUG: KASAN: slab-out-of-bounds in aa_dfa_match (security/apparmor/match.c:535) Read of size 1 at addr ffff0008901cc000 by task snap-update-ns/2120 CPU: 5 UID: 60578 PID: 2120 Comm: snap-update-ns Not tainted 7.0.0-rc4+ #22 PREEMPTLAZY Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN60WW 09/11/2025 Call trace: show_stack (arch/arm64/kernel/stacktrace.c:501) (C) dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) __asan_report_load1_noabort (mm/kasan/report_generic.c:378) aa_dfa_match (security/apparmor/match.c:535) match_mnt_path_str (security/apparmor/mount.c:244 security/apparmor/mount.c:336) match_mnt (security/apparmor/mount.c:371) aa_bind_mount (security/apparmor/mount.c:447 (discriminator 4)) apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1)) security_sb_mount (security/security.c:1062 (discriminator 31)) path_mount (fs/namespace.c:4101) __arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338) invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49) el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2)) do_el0_svc (arch/arm64/kernel/syscall.c:152) el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744) el0t_64_sync (arch/arm64/kernel/entry.S:596) Allocated by task 2120: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/arm64/include/asm/current.h:19 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_alloc_info (mm/kasan/generic.c:571) __kasan_kmalloc (mm/kasan/common.c:419) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5260 mm/slub.c:5272) aa_get_buffer (security/apparmor/lsm.c:2201) aa_bind_mount (security/apparmor/mount.c:442) apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1)) security_sb_mount (security/security.c:1062 (discriminator 31)) path_mount (fs/namespace.c:4101) __arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338) invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49) el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2)) do_el0_svc (arch/arm64/kernel/syscall.c:152) el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744) el0t_64_sync (arch/arm64/kernel/entry.S:596) The buggy address belongs to the object at ffff0008901ca000 which belongs to the cache kmalloc-rnd-06-8k of size 8192 The buggy address is located 0 bytes to the right of allocated 8192-byte region [ffff0008901ca000, ffff0008901cc000) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9101c8 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:-1 pincount:0 flags: 0x8000000000000040(head|zone=2) page_type: f5(slab) raw: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70 raw: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000 head: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70 head: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000 head: 8000000000000003 fffffdffe2407201 fffffdffffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff0008901cbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008 ---truncated---

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: selinux: fix overlayfs mmap() and mprotect() access checks The existing SELinux security model for overlayfs is to allow access if the current task is able to access the top level file (the "user" file) and the mounter's credentials are sufficient to access the lower level file (the "backing" file). Unfortunately, the current code does not properly enforce these access controls for both mmap() and mprotect() operations on overlayfs filesystems. This patch makes use of the newly created security_mmap_backing_file() LSM hook to provide the missing backing file enforcement for mmap() operations, and leverages the backing file API and new LSM blob to provide the necessary information to properly enforce the mprotect() access controls.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: rds: fix MR cleanup on copy error __rds_rdma_map() hands sg/pages ownership to the transport after get_mr() succeeds. If copying the generated cookie back to user space fails after that point, the error path must not free those resources again before dropping the MR reference. Remove the duplicate unpin/free from the put_user() failure branch so that MR teardown is handled only through the existing final cleanup path.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ceph: only d_add() negative dentries when they are unhashed Ceph can call d_add(dentry, NULL) on a negative dentry that is already present in the primary dcache hash. In the current VFS that is not safe. d_add() goes through __d_add() to __d_rehash(), which unconditionally reinserts dentry->d_hash into the hlist_bl bucket. If the dentry is already hashed, reinserting the same node can corrupt the bucket, including creating a self-loop. Once that happens, __d_lookup() can spin forever in the hlist_bl walk, typically looping only on the d_name.hash mismatch check and eventually triggering RCU stall reports like this one: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829 rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192) CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023 RIP: 0010:__d_lookup+0x46/0xb0 Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f RSP: 0018:ff745a70c8253898 EFLAGS: 00000282 RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966 RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0 RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89 R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0 R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0 PKRU: 55555554 Call Trace: <TASK> lookup_fast+0x9f/0x100 walk_component+0x1f/0x150 link_path_walk+0x20e/0x3d0 path_lookupat+0x68/0x180 filename_lookup+0xdc/0x1e0 vfs_statx+0x6c/0x140 vfs_fstatat+0x67/0xa0 __do_sys_newfstatat+0x24/0x60 do_syscall_64+0x6a/0x230 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is reachable with reused cached negative dentries. A Ceph lookup or atomic_open can be handed a negative dentry that is already hashed, and fs/ceph/dir.c then hits one of two paths that incorrectly assume "negative" also means "unhashed": - ceph_finish_lookup(): MDS reply is -ENOENT with no trace -> d_add(dentry, NULL) - ceph_lookup(): local ENOENT fast path for a complete directory with shared caps -> d_add(dentry, NULL) Both paths can therefore re-add an already-hashed negative dentry. Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn) is true. Fix both fs/ceph/dir.c sites the same way: only call d_add() for a negative dentry when it is actually unhashed. If the negative dentry is already hashed, leave it in place and reuse it as-is. This preserves the existing behavior for unhashed dentries while avoiding d_hash list corruption for reused hashed negatives.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Fix use-after-free in driver remove() In the remove callback, if a packet arrives after destroy_workqueue() is called, but before sock_release(), the qrtr_ns_data_ready() callback will try to queue the work, causing use-after-free issue. Fix this issue by saving the default 'sk_data_ready' callback during qrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback at the start of remove(). This ensures that even if a packet arrives after destroy_workqueue(), the work struct will not be dereferenced. Note that it is also required to ensure that the RX threads are completed before destroying the workqueue, because the threads could be using the qrtr_ns_data_ready() callback.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: skip reading rdevs that are not in_sync When reading bitmap pages from member disks, the code iterates through all rdevs and attempts to read from the first available one. However, it only checks for raid_disk assignment and Faulty flag, missing the In_sync flag check. This can cause bitmap data to be read from spare disks that are still being rebuilt and don't have valid bitmap information yet. Reading stale or uninitialized bitmap data from such disks can lead to incorrect dirty bit tracking, potentially causing data corruption during recovery or normal operation. Add the In_sync flag check to ensure bitmap pages are only read from fully synchronized member disks that have valid bitmap data.

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem

In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: validate reply type before using icmp_pointers Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type. That value is outside the range covered by icmp_pointers[], which only describes the traditional ICMP types up to NR_ICMP_TYPES. Avoid consulting icmp_pointers[] for reply types outside that range, and use array_index_nospec() for the remaining in-range lookup. Normal ICMP replies keep their existing behavior unchanged.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex vfio_cdx_set_msi_trigger() reads vdev->config_msi and operates on the vdev->cdx_irqs array based on its value, but provides no serialization against concurrent VFIO_DEVICE_SET_IRQS ioctls. Two callers can race such that one observes config_msi as set while another clears it and frees cdx_irqs via vfio_cdx_msi_disable(), resulting in a use-after-free of the cdx_irqs array. Add a cdx_irqs_lock mutex to struct vfio_cdx_device and acquire it in vfio_cdx_set_msi_trigger(), which is the single chokepoint through which all updates to config_msi, cdx_irqs, and msi_count flow, covering both the ioctl path and the close-device cleanup path. This keeps the test of config_msi atomic with the subsequent enable, disable, or trigger operations. Drop the pre-call !cdx_irqs test from vfio_cdx_irqs_cleanup() as part of this change: the optimization it provided is redundant with the !config_msi early-return inside vfio_cdx_msi_disable(), and leaving the test in place would be an unsynchronized read of state the new lock is meant to protect.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject short ahash digests during instance creation authencesn requires either a zero authsize or an authsize of at least 4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of high-order sequence number data at the end of the authenticated data. While crypto_authenc_esn_setauthsize() already rejects explicit non-zero authsizes in the range 1..3, crypto_authenc_esn_create() still copied auth->digestsize into inst->alg.maxauthsize without validating it. The AEAD core then initialized the tfm's default authsize from that value. As a result, selecting an ahash with digest size 1..3, such as cbcmac(cipher_null), exposed authencesn instances whose default authsize was invalid even though setauthsize() would have rejected the same value. AF_ALG could then trigger the ESN tail handling with a too-short tag and hit an out-of-bounds access. Reject authencesn instances whose ahash digest size is in the invalid non-zero range 1..3 so that no tfm can inherit an unsupported default authsize.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Reinstate disabling of BHs around IRQ handler If the driver executes ks8851_irq() AND a TX packet has been sent, then the driver enables TX queue via netif_wake_queue() which schedules TX softirq to queue packets for this device. If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to allocate SKBs for the received packets. If netdev_alloc_skb_ip_align() is called with BH enabled, then local_bh_enable() at the end of netdev_alloc_skb_ip_align() will trigger the pending softirq processing, which may ultimately call the .xmit callback ks8851_start_xmit_par(). The ks8851_start_xmit_par() will try to lock struct ks8851_net_par .lock spinlock, which is already locked by ks8851_irq() from which ks8851_start_xmit_par() was called. This leads to a deadlock, which is reported by the kernel, including a trace listed below. If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0 ("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock can also be triggered without received packet in the RX FIFO. The pending softirqs will be processed on return from spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the deadlock as well. Fix the problem by disabling BH around critical sections, including the IRQ handler, thus preventing the net_tx_action() softirq from triggering during these critical sections. The net_tx_action() softirq is triggered once BH are re-enabled and at the end of the IRQ handler, once all the other IRQ handler actions have been completed. __schedule from schedule_rtlock+0x1c/0x34 schedule_rtlock from rtlock_slowlock_locked+0x548/0x904 rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8 ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44 netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188 dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c sch_direct_xmit from __qdisc_run+0x1f8/0x4ec __qdisc_run from qdisc_run+0x1c/0x28 qdisc_run from net_tx_action+0x1f0/0x268 net_tx_action from handle_softirqs+0x1a4/0x270 handle_softirqs from __local_bh_enable_ip+0xcc/0xe0 __local_bh_enable_ip from __alloc_skb+0xd8/0x128 __alloc_skb from __netdev_alloc_skb+0x3c/0x19c __netdev_alloc_skb from ks8851_irq+0x388/0x4d4 ks8851_irq from irq_thread_fn+0x24/0x64 irq_thread_fn from irq_thread+0x178/0x28c irq_thread from kthread+0x12c/0x138 kthread from ret_from_fork+0x14/0x28

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mm/slab: return NULL early from kmalloc_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, kmalloc_nolock() called from NMI context can re-enter the slab allocator and acquire n->list_lock that the interrupted context is already holding, corrupting slab state. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: <NMI> dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 get_from_partial_node+0x120/0x4d0 ___slab_alloc+0x8a/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] </NMI> Fix this by returning NULL early when invoked from NMI on a UP kernel.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid early lgr access in smc_clc_wait_msg A CLC decline can be received while the handshake is still in an early stage, before the connection has been associated with a link group. The decline handling in smc_clc_wait_msg() updates link-group level sync state for first-contact declines, but that state only exists after link group setup has completed. Guard the link-group update accordingly and keep the per-socket peer diagnosis handling unchanged. This preserves the existing sync_err handling for established link-group contexts and avoids touching link-group state before it is available.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply() If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for both protocol and result, this is currently not treated as an error. In case of ac->negotiating == true and ac->protocol > 0, this leads to setting ac->protocol = 0 and ac->ops = NULL. Thereafter, the check for ac->protocol != protocol returns false, and init_protocol() is not called. Subsequently, ac->ops->handle_reply() is called, which leads to a null pointer dereference, because ac->ops is still NULL. This patch changes the check for ac->protocol != protocol to !ac->protocol, as this also includes the case when the protocol was set to zero in the message. This causes the message to be treated as containing a bad auth protocol.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt() ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read when the queue reader or writer index from hardware exceeds REMOTE_QUEUE_SIZE (60). A compromised service processor can trigger this by writing an out-of-range value to the reader or writer MMIO register before asserting an interrupt. Since writer is re-read from hardware on every loop iteration, it can also be set to an out-of-range value after the loop has already started. The root cause is that get_queue_reader() and get_queue_writer() return raw readl() values that are passed directly into get_queue_entry(), which computes: queue_begin + reader * sizeof(struct remote_input) with no bounds check. This unchecked MMIO address is then passed to memcpy_fromio(), reading 8 bytes from unintended device registers. For sufficiently large values the address falls outside the PCI BAR mapping entirely, triggering a machine check exception. Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of the loop body, before any call to get_queue_entry(). On an out-of-range value, reset the reader register to 0 via set_queue_reader() before breaking, so that normal queue operation can resume if the corrupted hardware state is transient.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem

In the Linux kernel, the following vulnerability has been resolved: tcp: call sk_data_ready() after listener migration When inet_csk_listen_stop() migrates an established child socket from a closing listener to another socket in the same SO_REUSEPORT group, the target listener gets a new accept-queue entry via inet_csk_reqsk_queue_add(), but that path never notifies the target listener's waiters. A nonblocking accept() still works because it checks the queue directly, but poll()/epoll_wait() waiters and blocking accept() callers can also remain asleep indefinitely. Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migration in inet_csk_listen_stop(). However, after inet_csk_reqsk_queue_add() succeeds, the ref acquired in reuseport_migrate_sock() is effectively transferred to nreq->rsk_listener. Another CPU can then dequeue nreq via accept() or listener shutdown, hit reqsk_put(), and drop that listener ref. Since listeners are SOCK_RCU_FREE, wrap the post-queue_add() dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which also covers the existing sock_net(nsk) access in that path. The reqsk_timer_handler() path does not need the same changes for two reasons: half-open requests become readable only after the final ACK, where tcp_child_process() already wakes the listener; and once nreq is visible via inet_ehash_insert(), the success path no longer touches nsk directly.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: fix use-after-free in release path due to uncancelled work The mtk_jpeg_release() function frees the context structure (ctx) without first cancelling any pending or running work in ctx->jpeg_work. This creates a race window where the workqueue callback may still be accessing the context memory after it has been freed. Race condition: CPU 0 (release) CPU 1 (workqueue) ---------------- ------------------ close() mtk_jpeg_release() mtk_jpegenc_worker() ctx = work->data // accessing ctx kfree(ctx) // freed! access ctx // UAF! The work is queued via queue_work() during JPEG encode/decode operations (via mtk_jpeg_device_run). If the device is closed while work is pending or running, the work handler will access freed memory. Fix this by calling cancel_work_sync() BEFORE acquiring the mutex. This ordering is critical: if cancel_work_sync() is called after mutex_lock(), and the work handler also tries to acquire the same mutex, it would cause a deadlock. Note: The open error path does NOT need cancel_work_sync() because INIT_WORK() only initializes the work structure - it does not schedule it. Work is only scheduled later during ioctl operations.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix error handling in rxgk_extract_token() Fix a missing bit of error handling in rxgk_extract_token(): in the event that rxgk_decrypt_skb() returns -ENOMEM, it should just return that rather than continuing on (for anything else, it generates an abort).

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix u32 overflow in pushbuf reloc bounds check nouveau_gem_pushbuf_reloc_apply() validates each relocation with if (r->reloc_bo_offset + 4 > nvbo->bo.base.size) but reloc_bo_offset is __u32 (uapi/drm/nouveau_drm.h) and the integer literal 4 promotes to unsigned int, so the addition is performed in 32 bits and wraps before the comparison against the size_t bo size. Cast to u64 so the addition happens in 64-bit arithmetic. [ Add Fixes: tag. - Danilo ]

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Handle probe errors properly The probe procedure of setup_card() in caiaq driver doesn't treat the error cases gracefully, e.g. the error from snd_card_register() calls snd_card_free() but continues. This would lead to a UAF for the further calls like snd_usb_caiaq_control_init(), as Berk suggested in another patch in the link below. However, the problem is not only that; in general, this function drops the all error handlings (as it's a void function) although its caller can propagate an error to snd_probe(), which eventually calls snd_card_free() as a proper error path. That said, we should treat each error case in setup_card(), and just return the error code promptly, which is then handled later as a fatal error in snd_probe(). This patch achieves it by changing the setup_card() to return an error code. Also, the superfluous snd_card_free() call is removed, too. Note that card->private_free can be set still safely at returning an error. All called functions in card_free() have checks of the unassigned resources or NULL checks.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data() Fix two bugs in pt5161l_read_block_data(): 1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24], but i2c_smbus_read_block_data() can return up to I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into the caller's buffer before the return value can be checked, so the post-read length validation does not prevent a stack overrun if a device returns more than 24 bytes. Resize the buffer to I2C_SMBUS_BLOCK_MAX. 2. Unexpected positive return on length mismatch: When all three retries are exhausted because the device returns data with an unexpected length, i2c_smbus_read_block_data() returns a positive byte count. The function returns this directly, and callers treat any non-negative return as success, processing stale or incomplete buffer contents. Return -EIO when retries are exhausted with a positive return value, preserving the negative error code on I2C failure.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap() Some crafted images can have illegal (!partial_decoding && m_llen < m_plen) extents, and the LZ4 inplace decompression path can be wrongly hit, but it cannot handle (outpages < inpages) properly: "outpages - inpages" wraps to a large value and the subsequent rq->out[] access reads past the decompressed_pages array. However, such crafted cases can correctly result in a corruption report in the normal LZ4 non-inplace path. Let's add an additional check to fix this for backporting. Reproducible image (base64-encoded gzipped blob): H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz 2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w ywAAAAAAAADwu14ATsEYtgBQAAA= $ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt $ dd if=/mnt/data of=/dev/null bs=4096 count=1

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential UAF after skb_unshare() failure If skb_unshare() fails to unshare a packet due to allocation failure in rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread()) will be NULL'd out. This will likely cause the call to trace_rxrpc_rx_done() to oops. Fix this by moving the unsharing down to where rxrpc_input_call_event() calls rxrpc_input_call_packet(). There are a number of places prior to that where we ignore DATA packets for a variety of reasons (such as the call already being complete) for which an unshare is then avoided. And with that, rxrpc_input_packet() doesn't need to take a pointer to the pointer to the packet, so change that to just a pointer.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix use-after-free on unbind The SPI subsystem frees the controller and any subsystem allocated driver data as part of deregistration (unless the allocation is device managed). Take another reference before deregistering the controller so that the driver data is not freed until the driver is done with it.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_struct uaf io_free_rbuf_ring() usees a struct user_struct, which io_zcrx_ifq_free() puts it down before destroying the ring.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix OOB reads in command_file_write due to missing size checks The command_file_write() handler allocates a kernel buffer of exactly count bytes and copies user data into it, but does not validate the buffer against the dot command protocol before passing it to get_dot_command_size() and get_dot_command_timeout(). Since both the allocation size (count) and the header fields (command_size, data_size) are independently user-controlled, an attacker can cause get_dot_command_size() to return a value exceeding the allocation, triggering OOB reads in get_dot_command_timeout() and an out-of-bounds memcpy_toio() that leaks kernel heap memory to the service processor. Fix with two guards: reject writes smaller than sizeof(struct dot_command_header) before allocation, then after copying user data reject commands where the buffer is smaller than the total size declared by the header (sizeof(header) + command_size + data_size). This ensures all subsequent header and payload field accesses stay within the buffer.

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: udf: fix partition descriptor append bookkeeping Mounting a crafted UDF image with repeated partition descriptors can trigger a heap out-of-bounds write in part_descs_loc[]. handle_partition_descriptor() deduplicates entries by partition number, but appended slots never record partnum. As a result duplicate Partition Descriptors are appended repeatedly and num_part_descs keeps growing. Once the table is full, the growth path still sizes the allocation from partnum even though inserts are indexed by num_part_descs. If partnum is already aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keep the old capacity and the next append writes past the end of the table. Store partnum in the appended slot and size growth from the next append count so deduplication and capacity tracking follow the same model.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix use-after-free in testdrv_probe() The function testdrv_probe() retrieves the device_node from the PCI device, applies an overlay, and then immediately calls of_node_put(dn). This releases the reference held by the PCI core, potentially freeing the node if the reference count drops to zero. Later, the same freed pointer 'dn' is passed to of_platform_default_populate(), leading to a use-after-free. The reference to pdev->dev.of_node is owned by the device model and should not be released by the driver. Remove the erroneous of_node_put() to prevent premature freeing.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap inline data write path The inline data buffer head (dibh) is being released prematurely in gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report) 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not available for this issue. The fix is based on analysis of the KASAN report and code review showing the buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Stop job scheduling across aie2_release_resource() Running jobs on a hardware context while it is in the process of releasing resources can lead to use-after-free and crashes. Fix this by stopping job scheduling before calling aie2_release_resource() and restarting it after the release completes. Additionally, aie2_sched_job_run() now checks whether the hardware context is still active.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix UAF in rlb_arp_recv during bond up/down The ALB RX path may access rx_hashtbl concurrently with bond teardown. During rapid bond up/down cycles, rlb_deinitialize() frees rx_hashtbl while RX handlers are still running, leading to a null pointer dereference detected by KASAN. However, the root cause is that rlb_arp_recv() can still be accessed after setting recv_probe to NULL, which is actually a use-after-free (UAF) issue. That is the reason for using the referenced commit in the Fixes tag. [ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI [ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] [ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary) [ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022 [ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding] [ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00 [ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206 [ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e [ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8 [ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8 [ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119 [ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810 [ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000 [ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0 [ 214.310347] Call Trace: [ 214.313070] <IRQ> [ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding] [ 214.320975] bond_handle_frame+0x166/0xb60 [bonding] [ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] [ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710 [ 214.339199] ? __pfx_arp_process+0x10/0x10 [ 214.343775] ? sched_balance_find_src_group+0x98/0x630 [ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10 [ 214.356513] ? arp_rcv+0x307/0x690 [ 214.360311] ? __pfx_arp_rcv+0x10/0x10 [ 214.364499] ? __lock_acquire+0x58c/0xbd0 [ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0 [ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 214.380743] ? lock_acquire+0x10b/0x140 [ 214.385026] process_backlog+0x3f1/0x13a0 [ 214.389502] ? process_backlog+0x3aa/0x13a0 [ 214.394174] __napi_poll.constprop.0+0x9f/0x370 [ 214.399233] net_rx_action+0x8c1/0xe60 [ 214.403423] ? __pfx_net_rx_action+0x10/0x10 [ 214.408193] ? lock_acquire.part.0+0xbd/0x260 [ 214.413058] ? sched_clock_cpu+0x6c/0x540 [ 214.417540] ? mark_held_locks+0x40/0x70 [ 214.421920] handle_softirqs+0x1fd/0x860 [ 214.426302] ? __pfx_handle_softirqs+0x10/0x10 [ 214.431264] ? __neigh_event_send+0x2d6/0xf50 [ 214.436131] do_softirq+0xb1/0xf0 [ 214.439830] </IRQ> The issue is reproducible by repeatedly running ip link set bond0 up/down while receiving ARP messages, where rlb_arp_recv() can race with rlb_deinitialize() and dereference a freed rx_hashtbl entry. Fix this by setting recv_probe to NULL and then calling synchronize_net() to wait for any concurrent RX processing to finish. This ensures that no RX handler can access rx_hashtbl after it is freed in bond_alb_deinitialize().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree Annotating a local pointer variable, which will be assigned with the kmalloc-family functions, with the `__cleanup(kfree)` attribute will make the address of the local variable, rather than the address returned by kmalloc, passed to kfree directly and lead to a crash due to invalid deallocation of stack address. According to other places in the repo, the correct usage should be `__free(kfree)`. The code coincidentally compiled because the parameter type `void *` of kfree is compatible with the desired type `struct { ... } **`.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: fix to avoid directly dereferencing user pointer In vidi_connection_ioctl(), vidi->edid(user pointer) is directly dereferenced in the kernel. This allows arbitrary kernel memory access from the user space, so instead of directly accessing the user pointer in the kernel, we should modify it to copy edid to kernel memory using copy_from_user() and use it.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: rcu: Fix rcu_read_unlock() deadloop due to softirq Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()") removes the recursion-protection code from __rcu_read_unlock(). Therefore, we could invoke the deadloop in raise_softirq_irqoff() with ftrace enabled as follows: WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180 Modules linked in: my_irq_work(O) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180 RSP: 0018:ffffc900000034a8 EFLAGS: 00010002 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329 RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000 R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054 FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <IRQ> trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 __is_insn_slot_addr+0x54/0x70 kernel_text_address+0x48/0xc0 __kernel_text_address+0xd/0x40 unwind_get_return_address+0x1e/0x40 arch_stack_walk+0x9c/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 __raise_softirq_irqoff+0x61/0x80 __flush_smp_call_function_queue+0x115/0x420 __sysvec_call_function_single+0x17/0xb0 sysvec_call_function_single+0x8c/0xc0 </IRQ> Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work") fixed the infinite loop in rcu_read_unlock_special() for IRQ work by setting a flag before calling irq_work_queue_on(). We fix this issue by setting the same flag before calling raise_softirq_irqoff() and rename the flag to defer_qs_pending for more common.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl() vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to obtain a struct vidi_context pointer. However, drm_dev->dev is the exynos-drm master device, and the driver_data contained therein is not the vidi component device, but a completely different device. This can lead to various bugs, ranging from null pointer dereferences and garbage value accesses to, in unlucky cases, out-of-bounds errors, use-after-free errors, and more. To resolve this issue, we need to store/delete the vidi device pointer in exynos_drm_private->vidi_dev during bind/unbind, and then read this exynos_drm_private->vidi_dev within ioctl() to obtain the correct struct vidi_context pointer.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout When llbitmap_suspend_timeout() times out waiting for percpu_ref to become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref. The caller (md_llbitmap_daemon_fn) then continues to the next page without calling llbitmap_resume(), leaving the percpu_ref in a killed state permanently. Fix this by resurrecting the percpu_ref before returning the error, ensuring the page control structure remains usable for subsequent operations.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a potential use-after-free of BTF object Refcounting in the check_pseudo_btf_id() function is incorrect: the __check_pseudo_btf_id() function might get called with a zero refcounted btf. Fix this, and patch related code accordingly. v3: rephrase a comment (AI) v2: fix a refcount leak introduced in v1 (AI)