Semaine du 11 mai au 17 mai 2026

Codekernel Queue Management System

Queue Management System 4.0.0 contains a stored cross-site scripting vulnerability that allows authenticated administrators to inject malicious scripts through user creation fields. Attackers can insert JavaScript payloads in the First Name, Last Name, and Email fields during user creation, which execute when viewing the User List page.

AMD Ryzen™ 7035 Series Processors with Radeon™ Graphics (formerly codenamed "Rembrandt R") · AMD Ryzen™ 7040 Series Mobile Processors with Radeon™ Graphics (formerly codenamed "Phoenix") · AMD Ryzen™ 8040 Series Mobile Processors with Radeon™ Graphics (formerly codenamed "Hawk Point") · AMD Ryzen™ 6000 Series Processors with Radeon™ Graphics (formerly codenamed "Rembrandt")

Use of uninitialized resource within the AMD Platform Management Framework (PMF) could allow an attacker to read a uninitialized kernel memory resulting in loss of confidentiality or availability.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: liveupdate: luo_file: remember retrieve() status LUO keeps track of successful retrieve attempts on a LUO file. It does so to avoid multiple retrievals of the same file. Multiple retrievals cause problems because once the file is retrieved, the serialized data structures are likely freed and the file is likely in a very different state from what the code expects. The retrieve boolean in struct luo_file keeps track of this, and is passed to the finish callback so it knows what work was already done and what it has left to do. All this works well when retrieve succeeds. When it fails, luo_retrieve_file() returns the error immediately, without ever storing anywhere that a retrieve was attempted or what its error code was. This results in an errored LIVEUPDATE_SESSION_RETRIEVE_FD ioctl to userspace, but nothing prevents it from trying this again. The retry is problematic for much of the same reasons listed above. The file is likely in a very different state than what the retrieve logic normally expects, and it might even have freed some serialization data structures. Attempting to access them or free them again is going to break things. For example, if memfd managed to restore 8 of its 10 folios, but fails on the 9th, a subsequent retrieve attempt will try to call kho_restore_folio() on the first folio again, and that will fail with a warning since it is an invalid operation. Apart from the retry, finish() also breaks. Since on failure the retrieved bool in luo_file is never touched, the finish() call on session close will tell the file handler that retrieve was never attempted, and it will try to access or free the data structures that might not exist, much in the same way as the retry attempt. There is no sane way of attempting the retrieve again. Remember the error retrieve returned and directly return it on a retry. Also pass this status code to finish() so it can make the right decision on the work it needs to do. This is done by changing the bool to an integer. A value of 0 means retrieve was never attempted, a positive value means it succeeded, and a negative value means it failed and the error code is the value.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Prevent interrupt storm on host controller error (HCE) The xHCI controller reports a Host Controller Error (HCE) in UAS Storage Device plug/unplug scenarios on Android devices. HCE is checked in xhci_irq() function and causes an interrupt storm (since the interrupt isn’t cleared), leading to severe system-level faults. When the xHC controller reports HCE in the interrupt handler, the driver only logs a warning and assumes xHC activity will stop as stated in xHCI specification. An interrupt storm does however continue on some hosts even after HCE, and only ceases after manually disabling xHC interrupt and stopping the controller by calling xhci_halt(). Add xhci_halt() to xhci_irq() function where STS_HCE status is checked, mirroring the existing error handling pattern used for STS_FATAL errors. This only fixes the interrupt storm. Proper HCE recovery requires resetting and re-initializing the xHC.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Disable LPM on ST1000DM010-2EP102 According to a user report, the ST1000DM010-2EP102 has problems with LPM, causing random system freezes. The drive belongs to the same BarraCuda family as the ST2000DM008-2FR102 which has the same issue.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults contpte_ptep_set_access_flags() compared the gathered ptep_get() value against the requested entry to detect no-ops. ptep_get() ORs AF/dirty from all sub-PTEs in the CONT block, so a dirty sibling can make the target appear already-dirty. When the gathered value matches entry, the function returns 0 even though the target sub-PTE still has PTE_RDONLY set in hardware. For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered across the CONT range. But page-table walkers that evaluate each descriptor individually (e.g. a CPU without DBM support, or an SMMU without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the unchanged target sub-PTE, causing an infinite fault loop. Gathering can therefore cause false no-ops when only a sibling has been updated: - write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared) - read faults: target still lacks PTE_AF Fix by checking each sub-PTE against the requested AF/dirty/write state (the same bits consumed by __ptep_set_access_flags()), using raw per-PTE values rather than the gathered ptep_get() view, before returning no-op. Keep using the raw target PTE for the write-bit unfold decision. Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT range may become the effective cached translation and software must maintain consistent attributes across the range.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: nouveau/gsp: drop WARN_ON in ACPI probes These WARN_ONs seem to trigger a lot, and we don't seem to have a plan to fix them, so just drop them, as they are most likely harmless.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: mmc: core: Avoid bitfield RMW for claim/retune flags Move claimed and retune control flags out of the bitfield word to avoid unrelated RMW side effects in asynchronous contexts. The host->claimed bit shared a word with retune flags. Writes to claimed in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite other bits when concurrent updates happen in other contexts, triggering spurious WARN_ON(!host->claimed). Convert claimed, can_retune, retune_now and retune_paused to bool to remove shared-word coupling.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated Explicitly set/clear CR8 write interception when AVIC is (de)activated to fix a bug where KVM leaves the interception enabled after AVIC is activated. E.g. if KVM emulates INIT=>WFS while AVIC is deactivated, CR8 will remain intercepted in perpetuity. On its own, the dangling CR8 intercept is "just" a performance issue, but combined with the TPR sync bug fixed by commit d02e48830e3f ("KVM: SVM: Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active"), the danging intercept is fatal to Windows guests as the TPR seen by hardware gets wildly out of sync with reality. Note, VMX isn't affected by the bug as TPR_THRESHOLD is explicitly ignored when Virtual Interrupt Delivery is enabled, i.e. when APICv is active in KVM's world. I.e. there's no need to trigger update_cr8_intercept(), this is firmly an SVM implementation flaw/detail. WARN if KVM gets a CR8 write #VMEXIT while AVIC is active, as KVM should never enter the guest with AVIC enabled and CR8 writes intercepted. [Squash fix to avic_deactivate_vmcb. - Paolo]

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Disable preemption between scx_claim_exit() and kicking helper work scx_claim_exit() atomically sets exit_kind, which prevents scx_error() from triggering further error handling. After claiming exit, the caller must kick the helper kthread work which initiates bypass mode and teardown. If the calling task gets preempted between claiming exit and kicking the helper work, and the BPF scheduler fails to schedule it back (since error handling is now disabled), the helper work is never queued, bypass mode never activates, tasks stop being dispatched, and the system wedges. Disable preemption across scx_claim_exit() and the subsequent work kicking in all callers - scx_disable() and scx_vexit(). Add lockdep_assert_preemption_disabled() to scx_claim_exit() to enforce the requirement.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp3x-rt5682-max9836: Add missing error check for clock acquisition The acp3x_5682_init() function did not check the return value of clk_get(), which could lead to dereferencing error pointers in rt5682_clk_enable(). Fix this by: 1. Changing clk_get() to the device-managed devm_clk_get(). 2. Adding proper IS_ERR() checks for both clock acquisitions.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnect Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rt1011: Use component to get the dapm context in spk_mode_put The correct helper to use in rt1011_recv_spk_mode_put() to retrieve the DAPM context is snd_soc_component_to_dapm(), from kcontrol we will receive NULL pointer.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL Apparently ICL may hang with an MCE if we write TRANS_VRR_VMAX/FLIPLINE before enabling TRANS_DDI_FUNC_CTL. Personally I was only able to reproduce a hang (on an Dell XPS 7390 2-in-1) with an external display connected via a dock using a dodgy type-C cable that made the link training fail. After the failed link training the machine would hang. TGL seemed immune to the problem for whatever reason. BSpec does tell us to configure VRR after enabling TRANS_DDI_FUNC_CTL as well. The DMC firmware also does the VRR restore in two stages: - first stage seems to be unconditional and includes TRANS_VRR_CTL and a few other VRR registers, among other things - second stage is conditional on the DDI being enabled, and includes TRANS_DDI_FUNC_CTL and TRANS_VRR_VMAX/VMIN/FLIPLINE, among other things So let's reorder the steps to match to avoid the hang, and toss in an extra WARN to make sure we don't screw this up later. BSpec: 22243 (cherry picked from commit 93f3a267c3dd4d811b224bb9e179a10d81456a74)

F5 BIG-IP · F5 big-ip access policy manager · F5 big-ip advanced firewall manager · F5 big-ip advanced web application firewall

When embedded Packet Velocity Acceleration (ePVA) acceleration is configured, undisclosed local ethernet traffic can cause an increase in ePVA and Traffic Management Microkernel (TMM) resource utilization.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

F5 BIG-IP · F5 big-ip access policy manager · F5 big-ip advanced firewall manager · F5 big-ip advanced web application firewall

When Bidirectional Forwarding Detection (BFD) is configured in Static and Dynamic routing protocols, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to stop processing BFD packets and cause the configured routing protocol to fail over.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Intel(R) Ethernet 800 series

Use after free for some Linux kernel driver for the Intel(R) Ethernet 800 series before version 2.3.14 within Ring 0: Kernel may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts.

Apple iOS and iPadOS · Apple macOS · Apple tvOS · Apple visionOS

An out-of-bounds write issue was addressed with improved input validation. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. An app may be able to cause unexpected system termination or write kernel memory.

Apple iOS and iPadOS · Apple macOS · Apple tvOS · Apple visionOS

A buffer overflow was addressed with improved input validation. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. A local user may be able to cause unexpected system termination or read kernel memory.

Apple iOS and iPadOS · Apple macOS · Apple ipados · Apple iphone os

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5. An app may be able to execute arbitrary code with kernel privileges.