Semaine du 27 avril au 3 mai 2026

Wavlink WL-WN570HA1 · Wavlink wl-wn570ha1 firmware

A weakness has been identified in Wavlink WL-WN570HA1 R70HA1 V1410_221110. This issue affects the function set_sys_adm of the file /cgi-bin/adm.cgi. This manipulation of the argument Username causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. Once again the vendors acted very professional and confirms, "that the WN570HA1 firmware version R70HA1 V1410_221110 has been removed from our website." This vulnerability only affects products that are no longer supported by the maintainer.

pickplugins User Verification by PickPlugins

The User Verification by PickPlugins plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.0.46. This is due to the use of a loose PHP comparison operator to validate OTP codes in the "user_verification_form_wrap_process_otpLogin" function. This makes it possible for unauthenticated attackers to log in as any user with a verified email address, such as an administrator, by submitting a "true" OTP value.

WPEverest User Registration Advanced Fields

The User Registration Advanced Fields plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the 'URAF_AJAX::method_upload' function in all versions up to, and including, 1.6.20. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. Note: The vulnerability can only be exploited if a "Profile Picture" field is added to the form.

Openvehicles open vehicle monitoring system firmware

Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_gvret.cpp, the length field in GVRET binary data is not properly validated, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted GVRET frames.

Linaro openamp

OpenAMP v2025.10.0 ELF loader contains an integer overflow vulnerability in firmware image parsing. In elf_loader.c, it performs multiplication of two attacker-controlled 16-bit values from the ELF header without overflow checking. On 32-bit embedded systems (STM32MP1, Zynq, i.MX), large values can cause the product to wrap around to a small value.

Buffer overflow vulnerability in cannelloni v2.0.0 in CAN frame parsing in parser.cpp in function parseCANFrame, and decoder.cpp in function decodeFrame allowing remote attackers to cause a denial of service (crash) or possibly execute arbitrary code via crafted CAN FD frames.

Integer underflow vulnerability in Open-SAE-J1939 thru commit b6caf884df46435e539b1ecbf92b6c29b345bdfe (2025-11-30) in SAE_J1939_Read_Transport_Protocol_Data_Transfer,allows attackers to write to arbitrary memory via crafted sequence number from the CAN frame.

Linuxfoundation automotive grade linux

AGL app-framework-main thru 17.1.12 contains a Zip Slip path traversal vulnerability (CWE-22) combined with a TOCTOU race condition (CWE-367) in the widget installation flow. The is_valid_filename function in wgtpkg-zip.c validates ZIP entry names but does not check for dot notation directory traversal sequences it only blocks absolute paths. The zread extraction function uses openat(workdirfd, filename, O_CREAT) which resolves dot notation values relative to the work directory, allowing files to be written anywhere on the filesystem. Critically, in function install_widget in file wgtpkg-install.c, extraction via zread occurs BEFORE signature verification via check_all_signatures. Even if signature verification fails, the error cleanup (remove_workdir) only deletes the temporary work directory files written outside via path traversal persist permanently.

Unsafe deserialization vulnerability in MixPHP Framework 2.x thru 2.2.17. The session and cache handlers use unserialize() on data from the filesystem in the FileHandler object.

Unsafe deserialization vulnerability in MixPHP Framework 2.x thru 2.2.17. The session and cache handlers use unserialize() on data from Redis in the RedisHandler object.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg-prueth: fix missing data copy and wrong recycle in ZC RX dispatch emac_dispatch_skb_zc() allocates a new skb via napi_alloc_skb() but never copies the packet data from the XDP buffer into it. The skb is passed up the stack containing uninitialized heap memory instead of the actual received packet, leaking kernel heap contents to userspace. Copy the received packet data from the XDP buffer into the skb using skb_copy_to_linear_data(). Additionally, remove the skb_mark_for_recycle() call since the skb is backed by the NAPI page frag allocator, not page_pool. Marking a non-page_pool skb for recycle causes the free path to return pages to a page_pool that does not own them, corrupting page_pool state. The non-ZC path (emac_rx_packet) does not have these issues because it uses napi_build_skb() to wrap the existing page_pool page directly, requiring no copy, and correctly marks for recycle since the page comes from page_pool_dev_alloc_pages().

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway.

Linux · Red Hat NVIDIA for RHEL 10 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data, a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE). To fix this we clear skb2->cb[], as suggested by Oskar Kjos. Also add minimal IPv4 header validation (version == 4, ihl >= 5).

Linux · Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP · Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP · Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix potential double free of skb When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at line 48 and returns 1 (error). This error propagates back through the call chain: x25_queue_rx_frame returns 1 | v x25_state3_machine receives the return value 1 and takes the else branch at line 278, setting queued=0 and returning 0 | v x25_process_rx_frame returns queued=0 | v x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb) again This would free the same skb twice. Looking at x25_backlog_rcv: net/x25/x25_in.c:x25_backlog_rcv() { ... queued = x25_process_rx_frame(sk, skb); ... if (!queued) kfree_skb(skb); }

Hashcat hashcat

A heap-based buffer overflow in hex_to_binary in the PKZIP hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted PKZIP hash file. The issue affects modules 17200, 17210, 17220, 17225, and 17230. When data_type_enum<=1, attacker-controlled hex data from a user-supplied hash string is decoded into a fixed-size buffer without proper input-length validation.

Hashcat hashcat

A heap-based buffer overflow in the Kerberos hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted Kerberos hash file. The issue affects module_hash_decode in multiple Kerberos-related modules because account_info_len is calculated from untrusted delimiter positions without upper-bound validation before memcpy copies the data into a fixed-size account_info buffer.

Hashcat hashcat

A stack-based buffer overflow in mangle_to_hex_lower() and mangle_to_hex_upper() in src/rp_cpu.c in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted rule file, or via the -j or -k rule options used with password candidates of 128 or more characters. The vulnerability is caused by a bounds check that fails to account for the 2x expansion that occurs when password bytes are converted to hexadecimal.

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __ksmbd_close_fd() via durable scavenger When a durable file handle survives session disconnect (TCP close without SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the handle for later reconnection. However, it did not clean up the byte-range locks on fp->lock_list. Later, when the durable scavenger thread times out and calls __ksmbd_close_fd(NULL, fp), the lock cleanup loop did: spin_lock(&fp->conn->llist_lock); This caused a slab use-after-free because fp->conn was NULL and the original connection object had already been freed by ksmbd_tcp_disconnect(). The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were left dangling on the freed conn->lock_list while fp->conn was nulled out. To fix this issue properly, we need to handle the lifetime of smb_lock->clist across three paths: - Safely skip clist deletion when list is empty and fp->conn is NULL. - Remove the lock from the old connection's lock_list in session_fd_check() - Re-add the lock to the new connection's lock_list in ksmbd_reopen_durable_fd().

Linux · Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds write in smb2_get_ea() EA alignment smb2_get_ea() applies 4-byte alignment padding via memset() after writing each EA entry. The bounds check on buf_free_len is performed before the value memcpy, but the alignment memset fires unconditionally afterward with no check on remaining space. When the EA value exactly fills the remaining buffer (buf_free_len == 0 after value subtraction), the alignment memset writes 1-3 NUL bytes past the buf_free_len boundary. In compound requests where the response buffer is shared across commands, the first command (e.g., READ) can consume most of the buffer, leaving a tight remainder for the QUERY_INFO EA response. The alignment memset then overwrites past the physical kvmalloc allocation into adjacent kernel heap memory. Add a bounds check before the alignment memset to ensure buf_free_len can accommodate the padding bytes. This is the same bug pattern fixed by commit beef2634f81f ("ksmbd: fix potencial OOB in get_file_all_info() for compound requests") and commit fda9522ed6af ("ksmbd: fix OOB write in QUERY_INFO for compound requests"), both of which added bounds checks before unconditional writes in QUERY_INFO response handlers.

Apache Software Foundation Apache MINA · Apache mina

The fix for CVE-2026-41635 was not applied to the 2.1.X and 2.2.X branches. Here was the original issue description: Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName(). Affected versions are Apache MINA 2.1.0 <= 2.1.11, and 2.2.0 <= 2.2.6. The problem is resolved in Apache MINA 2.1.12, and 2.2.7 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade.

Apache Software Foundation Apache MINA · Apache mina

The fix for CVE-2026-41409 was not applied to the 2.1.X and 2.2.X branches. Here was the original issue description: The fix for CVE-2024-52046 in Apache MINA AbstractIoBuffer.getObject() was incomplete. The classname allowlist of classes allowed to be deserialized was applied too late after a static initializer in a class to be read might already have been executed. Affected versions are Apache MINA 2.1.0 <= 2.1.11, and 2.2.0 <= 2.2.6. The problem is resolved in Apache MINA 2.1.12, and 2.2.7 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade The fix for CVE-2024-52046 in Apache MINA AbstractIoBuffer.getObject() was incomplete. The classname allowlist of classes allowed to be deserialized was applied too late after a static initializer in a class to be read might already have been executed. Affected versions are Apache MINA 2.1.0 <= 2.1.110, and 2.2.0 <= 2.2.6. The problem is resolved in Apache MINA 2.1.12, and 2.2.7 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade

elemntor Temporary Login

The Temporary Login plugin for WordPress is vulnerable to Authentication Bypass in versions up to and including 1.0.0. This is due to improper input validation in the maybe_login_temporary_user() function, which fails to verify that the 'temp-login-token' GET parameter is a scalar string before processing it. When the parameter is supplied as an array, PHP's empty() check is bypassed and sanitize_key() returns an empty string, which is then passed as the meta_value to get_users(). WordPress ignores an empty meta_value and returns all users matching the meta_key '_temporary_login_token', allowing authentication without a valid token. This makes it possible for unauthenticated attackers to authenticate as any active temporary login user by sending a single crafted GET request.

JS8Call · JS8Call-improved

JS8Call through 2.3.1 and JS8Call-improved before 3.0 have a stack-based buffer overflow via a radio transmission of @APRSIS GRID followed by a long Maidenhead locator. This occurs in grid2deg in APRSISClient.cpp.

Bitwarden CLI

Bitwarden CLI 2026.4.0 from 2026-04-22T21:57Z to 2026-04-22T23:30Z, when obtained from npm, had embedded malicious code. This is related to a Checkmarx supply chain incident.

Totolink NR1800X

A security vulnerability has been detected in Totolink NR1800X 9.1.0u.6279_B20210910. The impacted element is the function find_host_ip of the component lighttpd. Such manipulation of the argument Host leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used.

Totolink A8000RU

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function Vulnerability of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument proto leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used.

Exim · Exim exim

In Exim before 4.99.2, when the SPA authentication driver is used with an adversarial SPA resource, there can be an out-of-bounds write that crashes the connection instance, or erroneous data processing that divulges data from uninitialized heap memory.

Exim · Exim exim

In Exim before 4.99.2, when JSON lookup is enabled, an out-of-bounds heap write can occur when a JSON operator encounters malformed JSON in an untrusted header, because of an incorrect implementation of \ skipping.

IBM i

IBM i 7.6, 7.5, 7.4, 7.3, and 7.2 s vulnerable to privilege escalation caused by an invalid IBM i Web Administration GUI authorization check.  A malicious actor could cause user-controlled code to run with administrator privilege.

traefik · Red Hat OpenShift Dev Spaces 3.28 · Traefik traefik

Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is a high severity authentication bypass vulnerability in Traefik's ForwardAuth and snippet-based authentication middleware. Traefik's forwarded-header sanitization logic targets only canonical header names (e.g., X-Forwarded-Proto) and does not strip or normalize alias variants that use underscores instead of dashes (e.g., X_Forwarded_Proto). These unsanitized alias headers are forwarded intact to the authentication backend. When the backend normalizes underscore and dash header forms equivalently, an attacker can inject spoofed trust context — such as a trusted scheme or host — through the alias headers and bypass authentication on protected routes without valid credentials. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2.

traefik · Red Hat OpenShift Dev Spaces 3.28 · Traefik traefik

Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is an authentication bypass vulnerability in Traefik's ForwardAuth middleware when trustForwardHeader=false is configured and Traefik is deployed behind a trusted upstream proxy. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2.

Absolute Software Secure Access · Absolute secure access

CVE-2026-33447 is a buffer overflow in a message parsing function of the Secure Access client prior to 14.50. Attackers with control of a modified server can send a special packet that can overwrite a small portion of memory conceivably leading to memory corruption or denial of service.

Absolute Software Secure Access · Absolute secure access

CVE-2026-33446 is a buffer overflow in the authentication sub-system of the Secure Access client prior to 14.50. Attackers with control of a modified server can send a special packet that can overwrite a small portion of memory conceivably leading to memory corruption or a denial of service.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8

A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service.

A path traversal vulnerability in the /content/images/add endpoint of shopizer v3.2.5 allows attackers write arbitrary files to any writeable path via a crafted POST request.

An issue in the fileMd5 parameter in the /a/file/upload endpoint of JeeSite v5.15.1 allows authenticated attackers with file upload permissions to execute a path traversal and write arbitrary files with whitelisted suffixes to arbitrary filesystem locations while chunked upload is enabled.

Synway Information Engineering Co., Ltd. Synway SMG Gateway Management Software · Synway smg gateway management software

Synway SMG Gateway Management Software contains an OS command injection vulnerability in the RADIUS configuration endpoint at /en/9-2radius.php where the radius_address POST parameter is split and interpolated directly into a sed command without sanitization. An unauthenticated remote attacker can inject arbitrary shell commands by submitting a POST request with crafted radius_address, radius_address2, shared_secret2, source_ip, timeout, or retry parameters along with save=1 and enable_radius=1 to achieve remote code execution. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-07-11 (UTC).

Weaver Network Co., Ltd. E-office

Weaver (Fanwei) E-office versions prior to 10.0_20221201 contain an unauthenticated arbitrary file upload vulnerability in the OfficeServer.php endpoint that allows remote attackers to upload malicious files by sending multipart POST requests with arbitrary filenames and disguised content types. Attackers can upload PHP webshells to the Document directory and execute them via HTTP GET requests to achieve remote code execution as the web server user. Exploitation evidence was first observed by the Shadowserver Foundation on 2022-10-10 (UTC).

Progress Software MOVEit Automation · Progress moveit automation

Authentication bypass by primary weakness vulnerability in Progress Software MOVEit Automation allows Authentication Bypass. This issue affects MOVEit Automation: from 2025.0.0 before 2025.0.9, from 2024.0.0 before 2024.1.8, versions prior to 2024.0.0.

RTI Connext Professional

Improper Restriction of XML External Entity Reference vulnerability in RTI Connext Professional (Core Libraries) allows Serialized Data External Linking. This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.1.1, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*, from 5.2.0 before 5.2.*, from 4.3x before 5.1.*.

ASR Kestrel · Asrmicro asr1803 firmware

Out-of-bounds read vulnerability in ASR Kestrel (nr_fw modules) allows Overflow Buffers. This vulnerability is associated with program files Code/Nr/nr_fw/RA/src/NrPwrCtrl.C. This issue affects Kestrel: before 2026/02/10.

OPPO ColorOS Assistant

ColorOS Assistant has an unauthenticated start-download channel, leading to file path traversal.

django-mdeditor · Pylixm django-mdeditor

All versions of the package django-mdeditor are vulnerable to Missing Authentication for Critical Function in the image upload endpoint. An attacker can upload malicious files and achieve arbitrary code execution since this endpoint lacks authentication protection and proper sanitisation of file names.

MIYAGAWA Plack::Middleware::XSendfile · Miyagawa plack\

Plack::Middleware::XSendfile versions through 1.0053 for Perl can allow client-controlled path rewriting. Plack::Middleware::XSendfile allows the variation setting (sendfile type) to be set by the client via the X-Sendfile-Type header, if it is not considered in the middleware constructor or the Plack environment. A malicious client can set the X-Sendfile-Type header to "X-Accel-Redirect" to services running behind nginx reverse proxies, and then set the X-Accel-Mapping to map the path to an arbitrary file on the server. Since 1.0053, Plack::Middleware::XSendfile is deprecated and will be removed from future releases of Plack. This is similar to CVE-2025-61780 for Rack::Sendfile, although Plack::Middleware::XSendfile has some mitigations that disallow regular expressions to be used in the mapping, and only apply the mapping for the "X-Accel-Redirect" type.

Tenda FH303/A300 · Tenda fh303 firmware · Tenda a300 firmware

Tenda FH303/A300 firmware V5.07.68_EN contains a session weakness vulnerability that allows unauthenticated attackers to modify DNS settings by exploiting insufficient cookie validation. Attackers can send GET requests to the /goform/AdvSetDns endpoint with a crafted admin cookie to change DNS servers and redirect user traffic to malicious sites.

Tenda W3002R · Tenda A302 · Tenda W309R · Tenda w309r firmware

Tenda W3002R/A302/W309R wireless routers version V5.07.64_en contain a cookie session weakness vulnerability that allows unauthenticated attackers to modify DNS settings by exploiting insufficient session validation. Attackers can send GET requests to the /goform/AdvSetDns endpoint with a crafted admin language cookie to change primary and secondary DNS servers, redirecting user traffic to malicious DNS servers.

Tenda W308R v2 · Tenda w308r firmware

Tenda W308R v2 V5.07.48 contains a cookie session weakness vulnerability that allows unauthenticated attackers to modify DNS settings by exploiting insufficient session validation. Attackers can send GET requests to the goform/AdvSetDns endpoint with a crafted admin language cookie to change DNS servers and redirect user traffic to malicious sites.

wazuh · Wazuh wazuh

Wazuh is a free and open source platform used for threat prevention, detection, and response. From version 4.4.0 to before version 4.14.4, a path traversal vulnerability in Wazuh's cluster synchronization extraction routine allows an authenticated cluster peer to write arbitrary files outside the intended extraction directory on other cluster nodes. This can be escalated to code execution in the Wazuh service context by overwriting Python modules loaded by Wazuh components (proof of concept available as separate attachment). In deployments where the cluster daemon runs with elevated privileges, system-level compromise is possible. This issue has been patched in version 4.14.4.

arc53 DocsGPT

DocsGPT is a GPT-powered chat for documentation. From version 0.15.0 to before version 0.16.0, an attacker accessing both the official DocsGPT website or any local and public deployment, can craft a malicious payload bypassing the "MCP test" behavior to achieve arbitrary remote code execution (RCE). This issue has been patched in version 0.16.0.

TUBITAK BILGEM Software Technologies Research Institute Pardus Software Center

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in TUBITAK BILGEM Software Technologies Research Institute Pardus Software Center allows Path Traversal. This issue affects Pardus Software Center: before 0.6.4.

WebPros cPanel · WebPros WP Squared · WebPros WHM · Cpanel cpanel

cPanel and WHM versions after 11.40 contain an authentication bypass vulnerability in the login flow that allows unauthenticated remote attackers to gain unauthorized access to the control panel.

Cockpit v2.13.5 and earlier is vulnerable to arbitrary code execution via the filter parameter within multiple endpoints. This vulnerability allows an attacker to run system commands on the underlying infrastructure via the MongoLite $func operator.

TOTOLINK N200RE V5 was discovered to contain a command injection vulnerability via the macstr and bandstr parameters in the formMapDelDevice function.

Jenkins Project Jenkins GitHub Plugin · Jenkins github

Jenkins GitHub Plugin 1.46.0 and earlier improperly processes the current job URL as part of JavaScript implementing validation of the feature "GitHub hook trigger for GITScm polling", resulting in a stored cross-site scripting (XSS) vulnerability exploitable by non-anonymous attackers with Overall/Read permission.

Ollama · Ollama ollama

Ollama for Windows contains a Remote Code Execution vulnerability in its update mechanism due to improper handling of attacker‑controlled HTTP response headers. When downloading updates, the application constructs local file paths using values derived from HTTP headers without validation. These values are passed directly to filepath.Join, allowing path traversal sequences (../) to be resolved and enabling files to be written outside the intended update staging directory. An attacker who can influence update responses can exploit this flaw to write arbitrary executables to attacker‑chosen locations accessible to the current user, including the Windows Startup directory. This allows execution of arbitrary executables. Critically, when chained with CVE‑2026‑42248 (Missing Signature Verification for Updates), an attacker can deliver malicious payloads that are written to sensitive locations and executed automatically. Because Ollama for Windows performs silent automatic updates and executes staged binaries without user interaction, this results in automatic and persistent code execution without user awareness. Maintainers of this project were notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Versions from 0.12.10 to 0.17.5 were tested and confirmed as vulnerable, other versions were not tested but might also be vulnerable.

Ollama · Ollama ollama

Ollama for Windows does not perform integrity or authenticity verification of downloaded update executables. Unlike other platforms, the Windows implementation of the update verification routine unconditionally returns success so no digital signature or trust validation is performed before staging or executing update payloads, enabling attacker‑supplied executables to be accepted and later executed by the application. Critically, Ollama for Windows performs silent automatic updates, so the malicious payload may be installed automatically without user awareness. Maintainers of this project were notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Versions from 0.12.10 to 0.17.5 were tested and confirmed as vulnerable, other versions were not tested but might also be vulnerable.

CRM Sistemas de Fidelización MegaCMS

SQL injection (SQLi) in MegaCMS v12.0.0, specifically in the “id_territorio” parameter of the “/web_comunications/cms/get_provincias” endpoint. The vulnerability arises from inadequate validation and sanitisation of user input. Specifically, via a POST request, the “id_territorio” parameter, used immediately after the registration form is submitted, could be manipulated by an unauthenticated attacker to execute arbitrary SQL queries.

Google Chrome

Use after free in GPU in Google Chrome prior to 147.0.7727.138 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)

Snap One, LLC WattBox 800 · Snap One, LLC WattBox 820

Snap One WattBox 800 and 820 series firmware versions prior to 2.10.0.0 contain undisclosed diagnostic HTTP endpoints that require only the device MAC address and service tag for authentication, both of which are printed in plaintext on the physical device label. Attackers with access to the device label or documentation containing these values can authenticate to the several endpoints and execute arbitrary commands as root on the device.

OpenClaw · Openclaw openclaw

OpenClaw before 2026.3.31 contains a sandbox escape vulnerability allowing attackers to traverse directory boundaries through symlink exploitation during file synchronization operations. Remote attackers can bypass sandbox restrictions by crafting malicious symlinks in mirror sync operations to access arbitrary files outside intended boundaries.

OpenClaw · Openclaw openclaw

OpenClaw before 2026.3.22 contains a privilege escalation vulnerability where bootstrap setup codes are not bound to intended device roles and scopes during pairing. Attackers can exploit this during first-use device pairing to escalate privileges beyond their intended role and scope.

Carlson Software VASCO-B GNSS Receiver

The Carlson VASCO-B GNSS Receiver lacks an authentication mechanism, allowing an attacker with network access to directly access and modify its configuration and operational functions without needing credentials.

NVIDIA FLARE SDK · Nvidia nvflare

NVIDIA NVFlare Dashboard contains a vulnerability in the user management and authentication system where an unauthenticated attacker may cause authorization bypass through user-controlled key. A successful exploit of this vulnerability may lead to privilege escalation, data tampering, information disclosure, code execution, and denial of service.

Apache Software Foundation Pony Mail · Apache pony mail

** UNSUPPORTED WHEN ASSIGNED ** Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in Pony Mail leading to admin account takeover. This issue affects all versions of the Lua implementation of Pony Mail. There is a Python implementation under development under the name "Pony Mail Foal" that is not affected by this issue, but hasn't been released yet. As the Lua implementation of this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Stellar-group hpx

Insecure deserialization of untrusted input in StellarGroup HPX 1.11.0 under certain conditions may allow attackers to execute arbitrary code or other unspecified impacts.

Mozilla Firefox · Mozilla Thunderbird

Sandbox escape due to incorrect boundary conditions in the WebRTC: Networking component. This vulnerability was fixed in Firefox 150, Thunderbird 150, Firefox ESR 140.10.1, and Thunderbird 140.10.1.

D-Link DI-8100 · Dlink di-8100 firmware

A vulnerability was found in D-Link DI-8100 16.07.26A1. This affects the function tgfile_htm of the file tgfile.htm of the component CGI Endpoint. The manipulation of the argument fn results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

Totolink A8000RU

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument merge results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

Totolink A8000RU

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The affected element is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument maxRtrAdvInterval leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

Totolink A8000RU

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setOpenVpnClientCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument enabled can lead to os command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.

Totolink A8000RU

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setWiFiBasicCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument wifiOff results in os command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used.

Totolink A8000RU

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setVpnAccountCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument User leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.

Totolink A8000RU

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setPptpServerCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument enable causes os command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.

Totolink A8000RU

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument enable results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used.

Totolink A8000RU

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setWiFiWpsStart of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument wscDisabled leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Milesight MS-Cxx63-PD · Milesight MS-Cxx64-xPD · Milesight MS-Cxx73-xPD · Milesight MS-Cxx75-xxPD

Specific firmware versions of Milesight AIOT cameras use SSL certificates with default private keys.

Spring Boot · Red Hat AMQ Broker 7 · Red Hat AMQ Clients · Red Hat build of Apache Camel for Spring Boot 4

In certain circumstances, Spring Boot's default web security is ineffective allowing unauthorized access to all endpoints. For an application to be vulnerable, it must: be a servlet-based web application; have no Spring Security configuration of its own and rely on the default web security filter chain; depend on spring-boot-actuator-autoconfigure; not depend on spring-boot-health. If any of the above does not apply, the application is not vulnerable. Affected: Spring Boot 4.0.0–4.0.5; upgrade to 4.0.6 or later per vendor advisory.

Spring Boot · Vmware spring boot

Spring Boot's Cassandra auto-configuration does not perform hostname verification when establishing an SSL connection to Cassandra. Affected: Spring Boot 4.0.0–4.0.5 (fix 4.0.6), 3.5.0–3.5.13 (fix 3.5.14), 3.4.0–3.4.15 (fix 3.4.16), 3.3.0–3.3.18 (fix 3.3.19), 2.7.0–2.7.32 (fix 2.7.33); Cassandra SSL auto-configuration. Versions that are no longer supported are also affected per vendor advisory.

Spring Boot · Vmware spring boot

When configured to use an SSL bundle, Spring Boot's RabbitMQ auto-configuration does not perform hostname verification when connecting to the RabbitMQ broker. Affected: Spring Boot 4.0.0–4.0.5 (fix 4.0.6), 3.5.0–3.5.13 (fix 3.5.14) per vendor advisory.

Totolink A8000RU

A vulnerability was detected in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function CsteSystem of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument HTTP results in os command injection. The attack may be launched remotely. The exploit is now public and may be used.

Totolink A8000RU

A security vulnerability has been detected in Totolink A8000RU 7.1cu.643_b20200521. This impacts the function setLoginPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument admpass leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.

Totolink A8000RU

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setAdvancedInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument tty_server can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

NASA Earth Observing System Data and Information System (EOSDIS) MODAPS v8.1 was discovered to contain a SQL injection vulnerability in the category parameter

Totolink A8000RU

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setMiniuiHomeInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument sys_info results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

Totolink A8000RU

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The affected element is the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument telnet_enabled leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

Mercurycom mipc252w firmware

MERCURY MIPC252W IP camera 1.0.5 Build 230306 Rel.79931n contains an improper authentication vulnerability in the RTSP service. After successful Digest authentication in an initial DESCRIBE request, the device does not verify the Digest response parameter in subsequent RTSP requests within the same session. As a result, RTSP methods such as SETUP, PLAY, and TEARDOWN can be processed even when the Authorization header contains an empty or invalid response value, as long as the nonce and session identifier correspond to a previously authenticated session. This allows an attacker with network access to reuse session parameters and issue unauthorized RTSP control commands without computing a valid Digest response.

Tenda ac18 firmware

A command injection vulnerability exists in Tenda AC18 V15.03.05.05_multi. The vulnerability is located in the /goform/SetSambaCfg interface, where improper handling of the guestuser parameter allows attackers to execute arbitrary system commands.

Totolink A8000RU

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function CsteSystem of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument HTTP leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

Totolink A8000RU

A flaw has been found in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setWiFiAclRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument mode causes os command injection. The attack is possible to be carried out remotely. The exploit has been published and may be used.

Totolink A8000RU

A vulnerability was detected in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setNtpCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument tz results in os command injection. The attack can be executed remotely. The exploit is now public and may be used.

Totolink A8000RU

A security vulnerability has been detected in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setStorageCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument sambaEnabled leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

Totolink A8000RU

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. Affected by this issue is the function setDmzCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument wanIdx can lead to os command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

ProjeQtor

ProjeQtor versions 7.0 through 12.4.3 contain an unauthenticated SQL injection vulnerability in the login functionality where the login variable is directly concatenated into a SQL query without parameterization or sanitization. Attackers can inject arbitrary SQL expressions through the username field at the authentication endpoint to create privileged accounts, read sensitive data, and execute operating system commands if the database user has elevated permissions.

A remote code execution (RCE) vulnerability in the /devserver/start endpoint of leonvanzyl autocoder commit 79d02a allows attackers to execute arbitrary code via providing a crafted command parameter.

SmarterTools Inc. SmarterMail · Smartertools smartermail

SmarterTools SmarterMail builds prior to 9610 contain a cryptographic weakness in the file and email sharing endpoints that use DES-CBC encryption with keys and initialization vectors derived from System.Random seeded with insufficient entropy, reducing the seed space to approximately 19,000 possible values. An unauthenticated attacker can use the attachment download endpoint as an oracle to determine the seed in use and derive encryption keys and initialization vectors to forge sharing tokens for arbitrary emails, attachments, or file storage contents without prior access to the targeted content.

Totolink A8000RU

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. Affected by this issue is the function setWiFiEasyCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument merge leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used.

Totolink A8000RU

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. Affected by this vulnerability is the function setIpv6LanCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument addrPrefixLen can lead to os command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

Totolink A8000RU

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setIptvCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument setIptvCfg results in os command injection. The attack can be initiated remotely. The exploit has been made public and could be used.

Totolink A8000RU

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This impacts the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument enable leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Totolink A8000RU

A flaw has been found in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument wizard causes os command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used.

Apache Software Foundation Apache Camel · Red Hat build of Apache Camel 4.18.1 for Spring Boot 3.5.14 · Red Hat Fuse 7 · Red Hat JBoss Enterprise Application Platform 8

Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Apache Camel Camel-Coap component. Apache Camel's camel-coap component is vulnerable to Camel message header injection, leading to remote code execution when routes forward CoAP requests to header-sensitive producers (e.g. camel-exec) The camel-coap component maps incoming CoAP request URI query parameters directly into Camel Exchange In message headers without applying any HeaderFilterStrategy.   Specifically, CamelCoapResource.handleRequest() iterates over OptionSet.getUriQuery() and calls camelExchange.getIn().setHeader(...) for every query parameter. CoAPEndpoint extends DefaultEndpoint rather than DefaultHeaderFilterStrategyEndpoint, and CoAPComponent does not implement HeaderFilterStrategyComponent; the component contains no references to HeaderFilterStrategy at all. As a result, an unauthenticated attacker who can send a single CoAP UDP packet to a Camel route consuming from coap:// can inject arbitrary Camel internal headers (those prefixed with Camel*) into the Exchange. When the route delivers the message to a header-sensitive producer such as camel-exec, camel-sql, camel-bean, camel-file, or template components (camel-freemarker, camel-velocity), the injected headers can alter the producer's behavior. In the case of camel-exec, the CamelExecCommandExecutable and CamelExecCommandArgs headers override the executable and arguments configured on the endpoint, resulting in arbitrary OS command execution under the privileges of the Camel process. The producer's output is written back to the Exchange body and returned in the CoAP response payload by CamelCoapResource, giving the attacker an interactive RCE channel without any need for out-of-band exfiltration.                                                                                                                                                                         Exploitation prerequisites are minimal: a single unauthenticated UDP datagram to the CoAP port (default 5683). CoAP (RFC 7252) has no built-in authentication, and DTLS is optional and disabled by default. Because the protocol is UDP-based, HTTP-layer WAF/IDS controls do not apply. This issue affects Apache Camel: from 4.14.0 through 4.14.5, from 4.18.0 before 4.18.1, 4.19.0. Users are recommended to upgrade to version 4.18.1 or 4.19.0, fixing the issue.

Directorist Social Login

Incorrect Privilege Assignment vulnerability in Directorist Directorist Social Login allows Privilege Escalation.This issue affects Directorist Social Login: from n/a before 2.1.4.

Directorist Booking

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Directorist Booking allows SQL Injection.This issue affects Directorist Booking: from n/a before 3.0.2.

Apache Software Foundation Apache MINA · Apache mina

The fix for CVE-2024-52046 in Apache MINA AbstractIoBuffer.getObject() was incomplete. The classname allowlist of classes allowed to be deserialized was applied too late after a static initializer in a class to be read might already have been executed. Affected versions are Apache MINA 2.0.0 <= 2.0.27, 2.1.0 <= 2.1.10, and 2.2.0 <= 2.2.5. The problem is resolved in Apache MINA 2.0.28, 2.1.11, and 2.2.6 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade

Apache Software Foundation Apache Camel · Red Hat Build of Apache Camel 4.14 for Quarkus 3.27 · Red Hat build of Apache Camel 4.18.1 for Spring Boot 3.5.14 · Red Hat build of Apache Camel 4 for Quarkus 3

The Camel-Mail component is vulnerable to Camel message header injection. The custom header filter strategy used by the component (MailHeaderFilterStrategy) only filters the 'out' direction via setOutFilterStartsWith, while it does not configure the 'in' direction via setInFilterStartsWith. As a result, when a Camel application consumes mail through camel-mail (for example via from(\"imap://...\") or from(\"pop3://...\")) the inbound filter check is skipped and Camel-prefixed MIME headers are mapped unfiltered into the Exchange. An attacker who can deliver an email to a mailbox monitored by such a consumer can inject Camel-specific headers that, for some Camel components downstream of the mail consumer (such as camel-bean, camel-exec, or camel-sql), can alter the behaviour of the route. This is the same pattern that was previously addressed in camel-undertow (CVE-2025-30177) and the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891). This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.1. Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.1. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6.

Apache Software Foundation Apache MINA · Apache mina

Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName().  Affected versions are Apache MINA 2.0.0 <= 2.0.27, 2.1.0 <= 2.1.10, and 2.2.0 <= 2.2.5. The problem is resolved in Apache MINA 2.0.28, 2.1.11, and 2.2.6 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call  IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade.

Apache Software Foundation Apache Camel · Red Hat build of Apache Camel 4.18.1 for Spring Boot 3.5.14 · Red Hat Build of Apache Camel 4.18 for Quarkus 3.33 · Red Hat build of Apache Camel 4 for Quarkus 3

JmsBinding.extractBodyFromJms() in camel-jms, and the equivalent JmsBinding class in camel-sjms, deserialized the payload of incoming JMS ObjectMessage values via javax.jms.ObjectMessage.getObject() without applying any ObjectInputFilter, class allowlist or class denylist. Because this code path is reached whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer, an attacker able to publish a crafted ObjectMessage to a queue or topic consumed by a Camel application could achieve remote code execution when a deserialization gadget chain was present on the classpath. The same handling was reached transitively through camel-sjms2 (whose Sjms2Endpoint extends SjmsEndpoint) and through camel-amqp (whose AMQPJmsBinding extends JmsBinding), and by other JMS-family components built on JmsComponent such as camel-activemq and camel-activemq6. This issue affects Apache Camel: from 3.0.0 before 4.14.7, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.7. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.

Apache Software Foundation Apache Camel JMS · Apache Software Foundation Apache Camel CoAP · Apache Software Foundation Apache Camel Google PubSub · Red Hat Build of Apache Camel 4.14 for Quarkus 3.27

The fix for CVE-2025-27636 added setLowerCase(true) to HttpHeaderFilterStrategy so that case-variant header names such as 'CAmelExecCommandExecutable' are filtered out alongside 'CamelExecCommandExecutable'. The same setLowerCase(true) call was not applied to five non-HTTP HeaderFilterStrategy implementations: JmsHeaderFilterStrategy and ClassicJmsHeaderFilterStrategy in camel-jms, SjmsHeaderFilterStrategy in camel-sjms, CoAPHeaderFilterStrategy in camel-coap, and GooglePubsubHeaderFilterStrategy in camel-google-pubsub. Because those strategies use case-sensitive String.startsWith('Camel'/'camel') filtering while the Camel Exchange stores headers in a case-insensitive map, an attacker with JMS (or equivalent) producer access to the broker consumed by a Camel route can inject case-variant Camel internal headers, which are then resolved by downstream components such as camel-exec and camel-file using their canonical casing. This enables remote code execution and arbitrary file write on routes that forward JMS messages to header-driven components. This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.

GeoVision Inc. GV-IP Device Utility

An insufficient encryption vulnerability exists in the Device Authentication functionality of GeoVision GV-IP Device Utility 9.0.5. Listening to broadcast packets can lead to credentials leak. An attacker can listen to broadcast messages to trigger this vulnerability. When interacting with various Geovision devices on the network, the utility may send privileged commands; in order to do so, the username and password of the device need to be provided. In some instances the command is broadcasted over UDP and the username/password are encrypted using a cryptographic protocol that appears to be derivated from Blowfish. However the symmetric key used for the encryption is also included in the packet, and thus the security of the username/password only relies on the "obscurity" of the encryption scheme. An attacker on the same LAN can listen to the broadcast traffic once an admin user interacts with the device, and decrypt the credentials using their own implementation of the algorithm. With this password the attacker would have full control over the device configuration, allowing them to change its ip address or even reset it to factory default.