Toutes les dates

phpIPAM

A vulnerability was detected in phpIPAM up to 1.8.3. Affected by this issue is the function create_rack_link of the file app/tools/racks/show-rack-popup.php of the component Rack Link Creation. Performing a manipulation of the argument deviceid results in cross site scripting. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure.

FaveoSuite Faveo Helpdesk

A vulnerability was determined in FaveoSuite Faveo Helpdesk up to 2.0.3. Affected by this vulnerability is the function UnAuthController.changeStatus/UnAuthController.close/UnAuthController.open/UnAuthController.resolve of the file app/Http/Controllers/Client/helpdesk/UnAuthController.php. Executing a manipulation of the argument id/status can lead to missing authorization. The attack can be launched remotely. The vendor was contacted early about this disclosure.

Travisun Opptrix

A vulnerability was found in Travisun Opptrix 0.4.0. Affected is the function Buffer.concat of the file /api/channels/webhook/ of the component preParsing handler. Performing a manipulation results in denial of service. The attack can be initiated remotely. The exploit has been made public and could be used. The project has been completely taken offline and deprecated. The project maintainer explains: "The mentioned security risk was a design flaw that manifested primarily in local environments during earlier stages of version development. We previously addressed and resolved this specific risk; however, because the project was restricted to a small learning scope and the main versions were intended to run exclusively on localhost, the security fix was only pushed directly to our GitHub repository before it went private." This vulnerability only affects products that are no longer supported by the maintainer.

Magepeople inc. WpEvently

Missing Authorization vulnerability in Magepeople inc. WpEvently mage-eventpress allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WpEvently: from n/a through 5.7.8.

BookStackApp BookStack

BookStack before 26.09.2 contains an incorrect authorization vulnerability in AttachmentController that allows authenticated users to access other users' draft page attachments by ID. Attackers with attachment permissions can enumerate sequential attachment IDs to download, rename, relink, or replace files on another user's unpublished draft pages.

ONEARMY community-platform

ONEARMY community-platform before 2.165.2 contains an insecure direct object reference vulnerability that allows authenticated users to mark other users' notifications as read via POST /api/notifications/:id/read. Attackers can iterate sequential notification IDs to suppress unread indicators of users in the same tenant, causing them to miss replies, comments and new-content notices.

xinnan-tech xiaozhi-esp32-server

Xiaozhi-esp32-server before 0.9.8 contains an insecure direct object reference vulnerability in the manager-api DeviceController.getAddressBook handler that allows authenticated users to read other users' device address books. Attackers with a normal or self-registered account can request /device/address-book/{macAddress} with another user's device MAC to obtain contact MACs, aliases, call permissions, and owner user IDs.

YunaiV yudao-cloud

yudao-cloud through 2026.09 contains an insecure direct object reference vulnerability in the mall trade module that allows authenticated members to read other members' after-sale operation logs by supplying arbitrary afterSaleId values. Attackers can enumerate sequential after-sale IDs against GET /app-api/trade/after-sale-log/list to expose refund amounts, status transitions and timestamps belonging to other members.

francoisjacquet RosarioSIS

RosarioSIS before 12.9.1 contains a missing authorization vulnerability that allows authenticated teachers to write records for students outside their course period by supplying arbitrary student IDs. Attackers can modify the st_arr, values, or attendance POST arrays in MakeReferral.php, EnterEligibility.php, InputFinalGrades.php, and TakeAttendance.php to create referrals, eligibility codes, attendance and final grades for any student in the school.

Bottelet DaybydayCRM

DaybydayCRM through 2.2.1 contains a missing authorization vulnerability in ProjectsController::updateAssign() that allows any authenticated user to reassign projects without the can-assign-new-user-to-project permission. Low-privileged employees can send PATCH or POST requests to /projects/updateassign/{external_id} with a chosen user_assigned_id to redirect project ownership and notifications.

CervantesSec cervantes

IDOR in Cervantes version v1.3-beta could allow an authenticated attacker ca access sensitive findings, proof-of-concept details, credentials, and client information from projects they do not belong to. Additionally, they can modify finding statuses and transfer findings to their own projects, compromising data confidentiality and integrity.

CervantesSec cervantes

BOLA Allows Cross-Project Target Tampering  in Cervantes version v1.3-beta could allow an attacker modify or delete targets belonging to other projects without authorization, compromising the integrity of penetration testing scopes, results, and associated security reports.

quadlayers WP Social Feed Gallery

Missing Authorization vulnerability in quadlayers WP Social Feed Gallery insta-gallery allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP Social Feed Gallery: from n/a through 5.0.13.

Igor Funa Ad Inserter

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Igor Funa Ad Inserter ad-inserter allows Reflected XSS.This issue affects Ad Inserter: from n/a through 2.8.18.

CervantesSec cervantes

Stored XSS vulnerability in the “Notes” field of the Checklists in Cervantes version v1.3-beta could allow an attacker to execute arbitrary code in another user's browser with elevated privileges

Plugins360 Labs All-in-One Video Gallery

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Plugins360 Labs All-in-One Video Gallery all-in-one-video-gallery allows Stored XSS.This issue affects All-in-One Video Gallery: from n/a through 4.9.7.

Hai Zheng / Lite Speed Cache LiteSpeed Cache

Insertion of Sensitive Information Into Sent Data vulnerability in Hai Zheng / Lite Speed Cache LiteSpeed Cache litespeed-cache allows Retrieve Embedded Sensitive Data.This issue affects LiteSpeed Cache: from n/a through 7.9.

Brainstorm Force SureDash

Missing Authorization vulnerability in Brainstorm Force SureDash suredash allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects SureDash: from n/a through 1.12.2.

Scada-LTS

A flaw has been found in Scada-LTS 2.8.0. Affected by this vulnerability is the function HttpServletRequest.getParameter of the file AmChartValuesAPI.java of the component AmCharts Data API. Executing a manipulation of the argument ids can lead to authorization bypass. The attack can be executed remotely. The exploit has been published and may be used. The vendor announces: "At this moment we are working on new release with security enhancements which will be introduced to the community soon."

InternScience InternAgent

A weakness has been identified in InternScience InternAgent 1.5.0. This affects the function train of the file tasks/AutoChem/code/experiment.py of the component LoRA Loading. This manipulation of the argument base_model_name_or_path causes inclusion of functionality from untrusted control sphere. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks.

HCL Software BigFix Platform

BigFix Platform uses Mozilla CA certificate bundle (PEM). Versions of the bundle dated before 2026/10/20 still trust certificates whose private keys have been compromised. When BigFix Platform validates servers using such a bundle, an on-path attacker can impersonate remote servers and tamper with files downloaded by the application. The issue is resolved by using bundle version 2026/10/20 or later. The fixed bundle is available starting from BES Support v1520.

Unknown News Kit Addons For Elementor

The News Kit Addons For Elementor WordPress plugin through 1.4.7 does not perform capability or ownership checks before updating post metadata in one of its authenticated AJAX actions, allowing users with subscriber-level access and above to write arbitrary post meta, under attacker-chosen keys, to any post including those owned by other users. This can be used to overwrite protected core metadata and tamper with content created by higher-privileged users.

Unknown News Kit Addons For Elementor

The News Kit Addons For Elementor WordPress plugin before 1.4.9 does not perform a capability check on one of its AJAX actions, allowing authenticated users with subscriber-level access and above to install and activate a specific News Kit Addons For Elementor WordPress plugin before 1.4.9 from the WordPress.org repository.

Unknown Front End Users

The Front End Users WordPress plugin through 3.2.35 does not restrict which account attributes a visitor may set when registering through its front-end forms, allowing unauthenticated users to assign themselves an arbitrary membership level and to mark their own account as approved, confirmed and paid, bypassing the Front End Users WordPress plugin through 3.2.35's content restrictions and its registration gating.

Unknown WPVR

The WPVR WordPress plugin before 9.0.3 does not properly sanitise and escape some of its tour hotspot content before storing it and outputting it on the front end, which could allow users with the Contributor role and above to perform Stored Cross-Site Scripting attacks that execute in the browser of any user viewing the affected tour.

Unknown GeoDirectory

The GeoDirectory WordPress plugin before 2.8.194 does not sanitise and escape some of its map shortcode attributes before outputting them within a style attribute, allowing users with the Contributor role and above to perform Stored Cross-Site Scripting attacks that execute in the context of any user viewing the affected content.

Unknown GeoDirectory

The GeoDirectory WordPress plugin before 2.8.194 does not perform status, ownership or password checks when loading listings for one of its unauthenticated AJAX handlers, allowing unauthenticated users to disclose the content of non-public (draft, pending and private) listings by supplying their IDs.

Unknown GeoDirectory

The GeoDirectory WordPress plugin before 2.8.194 does not validate a user-supplied image URL before using it as a local file path when saving a front-end listing, allowing users with Subscriber-level access and above to read files from outside the web root and to delete files on the server, limited to file names that carry an allowed media extension. A disclosed file is re-published at a public URL and its original is deleted as a side effect.

Unknown GeoDirectory

The GeoDirectory WordPress plugin before 2.8.194 does not perform any status or ownership check when rendering a listing's map-popup through one of its single-item REST routes, allowing unauthenticated users to read the title, permalink and card fields of non-public (draft, pending, private and trashed) listings by supplying the listing ID.

Unknown GeoDirectory

The GeoDirectory WordPress plugin before 2.8.194 does not verify that a referenced attachment belongs to the listing being saved, allowing users with Subscriber-level access and above to modify the title, caption, moderation status and featured flag of images belonging to other users' listings, and to claim another user's image as their own featured image.

Unknown MAS Videos

The MAS Videos WordPress plugin through 1.3.4 does not perform any capability or ownership check when handling its front-end video and playlist deletion requests, and the nonce it verifies is tied only to a static action rather than to the targeted object, allowing any authenticated user with a minimal role to permanently delete arbitrary posts, pages, attachments and other content belonging to other users.

Unknown Advanced Twenty Seventeen

The Advanced Twenty Seventeen WordPress plugin through 1.3.1 does not perform any capability or nonce check on the action that creates and activates its bundled child , allowing any authenticated user such as a subscriber to switch the site's active site-wide, and allowing the same action to be triggered against any logged-in user including an administrator via CSRF.

Unknown Pixel Tag Manager for WooCommerce

The Pixel Tag Manager for WooCommerce WordPress plugin before 2.2.3 does not perform a capability check in one of its AJAX actions, and exposes the nonce protecting it to any user able to access the admin dashboard, allowing users with a role as low as Contributor to overwrite the Pixel Tag Manager for WooCommerce WordPress plugin before 2.2.3's tracking configuration and have arbitrary JavaScript executed in the browsers of all visitors, including administrators.

MongoDB, Inc. Compass

MongoDB Compass relies on Electron, a third-party runtime that carries its own TLS root certificate store. This root certificate store has the recoverable eMudhra intermediate CA certificates. Issue is resolved by updating to Compass 1.53.1, which includes Electron 44.9.1.

bytecodealliance wasmtime

Wasmtime is a runtime for WebAssembly. From 46.0.0 until 48.0.7 and 49.0.4, lowering a host-created component-model stream or future into a guest can omit a required payload-type check after the value passes through guest code and returns through StreamAny, FutureAny, Val::Stream, Val::Future, or an equivalent typed reader. A malicious guest that controls exported function types or returned values can cause the host to pass the type-erased value to a guest expecting a different payload type, which panics the Wasmtime host. This issue is fixed in versions 48.0.7 and 49.0.4.

mlflow

MLflow is an open source AI engineering platform for agents, large language models, and machine learning models. From 3.12.0rc0 until 3.17.0, the scorer invoke, register, and GenAI evaluate endpoints, including unauthenticated POST /ajax-api/3.0/mlflow/scorer/invoke, accept serialized third-party scorer data that Scorer.model_validate_json resolves using a module-path allowlist without constraining the selected class or its constructor arguments. When optional trulens and trulens-providers-litellm packages are installed, an attacker can select mlflow.genai.scorers.trulens, choose a model URI outside MLflow's native provider registry so execution uses the LiteLLM fallback, and supply api_base and api_key values that cause the server to send an outbound request to an attacker-chosen or internal host with attacker-controlled headers and body. The vulnerable deserialization occurs before a tracking-store lookup or job submission. This issue is fixed in version 3.17.0.

langchain-ai langgraph

The LangGraph CLI is the official command-line interface for LangGraph. From 0.4.15 until 0.4.32, langgraph deploy --verbose passes a temporary registry push token on standard input to docker login --password-stdin, but the CLI subprocess helper prints command input in verbose mode. Anyone who can read resulting CI logs or terminal recordings before the token's maximum 12-hour expiration can pull deployment images or push images to that deployment's image repository. Deployments without --verbose and remote image builds are not affected, and the token alone cannot update a deployment to execute a pushed image. This issue is fixed in version 0.4.32.

langchain-ai langgraph · langchain-ai langgraph-checkpoint-postgres · langchain-ai langgraph-checkpoint-sqlite

LangGraph checkpoint savers provide Postgres- and SQLite-backed state persistence for LangGraph workflows and agents. Prior to langgraph-checkpoint-postgres 3.1.3 and langgraph-checkpoint-sqlite 3.1.2, PostgresStore, AsyncPostgresStore, SqliteStore, and AsyncSqliteStore flatten namespace labels with ".".join(namespace), while BaseStore validates labels only for put and aput. Unvalidated dotted labels passed through get, search, delete, list_namespaces, their asynchronous equivalents, or direct batch and abatch operations can resolve to another tenant's stored namespace, allowing cross-namespace reads, overwrites, or deletion. InMemoryStore is not affected because it compares namespace tuples. This issue is fixed in langgraph-checkpoint-postgres 3.1.3 and langgraph-checkpoint-sqlite 3.1.2.

Kakao khaiii

A security flaw has been discovered in Kakao khaiii up to 0.4. The impacted element is the function khaiii::nn::Linear::open of the file src/main/cpp/khaiii/nn/Linear.cpp of the component JSON Config File Handler. The manipulation of the argument hidden_dim/class_num results in out-of-bounds read. The attack requires a local approach. The exploit has been released to the public and may be used for attacks. The vendor explains: "khaiii treats the resource directory (--rsc-dir) as trusted input, like a binary or a shared library. To use this defect, an attacker must already be able to write to that directory. With that access, an attacker can change the analysis results without this defect." This vulnerability only affects products that are no longer supported by the maintainer.

open-reception appointment-booking-software

OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. In versions 2.1.0 and prior, an unauthenticated attacker can store an arbitrary ML-KEM-768 public key under any existing user's identity in any tenant's staff-crypto recipient directory. The product's design guarantees that appointment data is end-to-end encrypted to staff members and that the staff recipient directory is not attacker-writable, so that even administrators and the operator cannot read patient data. This endpoint breaks that guarantee for an unauthenticated remote actor: it allows writing an arbitrary encryption recipient into the recipient directory of any tenant. The injected key receives the tunnel key of every appointment booked afterward in that tenant, because booking clients encrypt to all active staff keys. The attacker holds the corresponding secret key and is a persistent, unauthorized recipient of that key material. At time of publication, there are no publicly available patches.

open-reception appointment-booking-software

OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 2.2.2, an attacker overbooks an agent, placing multiple appointments into a single time slot that the system is designed to keep exclusive. The number of overlapping appointments equals the number of concurrent requests, and one booking token is enough because the token is consumed after the insert. This results in the integrity of the booking-calendar breaking and availability being denied to other clients. This issue has been patched in version 2.2.2.

twisted

Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.web.http.HTTPChannel.headerReceived rejects a NUL byte in an HTTP header value but accepts a bare carriage return or bare line feed. Because Twisted splits header lines only on CRLF, a hidden Content-Length header can remain folded into another value while a lenient front end treats the bare character as a line terminator. The resulting framing disagreement can smuggle a following request past front-end access controls, poison a shared connection or cache, and expose a later client to the wrong response. This issue is an incomplete-fix residual of earlier Twisted request-smuggling protections. This issue is fixed in version 26.10.0rc1.

UbiquitousLearning mllm

A vulnerability was identified in UbiquitousLearning mllm up to 2.0.2. The affected element is the function load_model of the file pymllm/mobile/convertor/__init__.py of the component Convertor. The manipulation of the argument shard_file leads to path traversal. The attack needs to be performed locally. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.

twisted

Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.mail.imap4.IMAP4Server reaches twisted.mail.imap4.parseNestedParens with a negative literal size in an authenticated SEARCH command after the client enters the selected mailbox state. The negative size moves the parser cursor below zero, and Python's negative indexing prevents the synchronous scanning loop from terminating. The loop freezes the single-threaded reactor, stopping other IMAP connections and any SMTP or POP3 services hosted in the same process until restart. This issue is fixed in version 26.10.0rc1.

zephyrproject zephyr

The DNS stub resolver in subsys/net/lib/dns/resolve.c binds one UDP socket per configured server when the resolver context is initialised (dns_resolve_init_locked() -> register_dispatcher() -> dns_dispatcher_register()), with the local port left at 0 so the stack picks an ephemeral port exactly once. dns_write() then sends every subsequent query from that same socket without re-binding, so the source port is constant for the lifetime of the resolver context while only the 16-bit transaction identifier (ctx->queries[i].id, drawn with sys_rand16_get()) varies per query. RFC 5452 section 9.2 requires both to vary; with a fixed port, an off-path attacker has to guess only the identifier. The stable port is cheap to learn. Any single observed query reveals it permanently, and it can also be found by probing the ephemeral UDP range: subsys/net/ip/connection.c answers unmatched unicast UDP with an ICMP port-unreachable, so the resolver's socket is the one port in that range that stays silent. Acceptance of a reply is decided solely by get_slot_by_id() matching the transaction identifier and a CRC-16 of the queried name — the reply's source address is never checked (dispatcher_cb() does ARG_UNUSED(addr)), so forged answers need not even be spoofed to appear to come from the configured server; they only need to reach the resolver's port. An attacker with UDP reachability to the device (same LAN, Wi-Fi or mesh segment, or a globally routable device address) can therefore flood answers for a predictable query name across the 16-bit identifier space during a query window and race the legitimate server. A win makes the application resolve an attacker-chosen address, and with CONFIG_DNS_RESOLVER_CACHE enabled the forged record is retained for its attacker-chosen TTL. The attack still requires winning that race, and applications that validate TLS certificates for the resolved endpoint are largely protected. The fix draws a fresh local port before each query to a server that has nothing outstanding: dns_randomize_source_port() unregisters the dispatcher, closes and reopens the socket, and re-registers it bound to port 0 so the system selects a new port, raising the per-query guessing space from roughly 16 to roughly 31 bits. Multicast DNS and LLMNR are excluded because their ports are protocol-fixed. The behaviour is controlled by CONFIG_DNS_RESOLVER_RANDOMIZE_SOURCE_PORT (default y).

zephyrproject zephyr

The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide. This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously joined — therefore retains a valid token for the device's whole uptime, and can predict the identifiers of later exchanges, without having to observe the unicast renew traffic or race the legitimate server. A forged reply that passes those checks has effect regardless of client state, because dhcpv4_parse_options() applies its side effects before the state machine gate in dhcpv4_handle_reply(): the router option calls net_if_ipv4_set_gw() and the DNS option calls dns_resolve_reconfigure(). A single accepted datagram can thus repoint the device's default gateway and resolvers at attacker-controlled addresses, redirecting its traffic; during RENEWING or REBINDING a forged DHCPACK re-binds the lease with attacker-chosen parameters and a forged DHCPNAK removes the address and restarts configuration. The fix draws a fresh sys_rand32_get() value at each point where a transaction begins — entering SELECTING, RENEWING and REBINDING, and at the INIT/INIT-REBOOT entry taken when an interface with a lease goes down — while REQUESTING and DECLINE keep the identifier of the exchange they belong to, as RFC 2131 requires. As a side effect the client also no longer discards a slow server's offer after retransmitting a discover, and the initial-discover backoff now draws its own randomness instead of deriving it from the identifier.

Tenda F6

A security flaw has been discovered in Tenda F6 12.02.01.73. This impacts an unknown function of the component Web Management Interface. Performing a manipulation results in cross-site request forgery. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks.

AWS MCP Server

An incomplete list of disallowed inputs in the Python code validator of the run_script tool in AWS MCP Server might allow an authenticated remote user to execute arbitrary code within their own isolated session environment via a crafted script. AWS fixed this issue service-side. No customer action is required.

AWS multi-model-server

Server-side request forgery in the model download path in Amazon Web Services Multi Model Server 1.1.11 and earlier might allow remote actors to send requests to internal network destinations via a crafted model URL. Multi Model Server is end of life and no fixed version is available. Users should discontinue use of Multi Model Server and migrate to a supported model serving solution.

tokio-rs tokio

Tokio is a runtime for writing applications with Rust. In 1.54.0, a race condition between tokio::time::Interval::poll_tick (including .tick().await) and the multi-threaded runtime's time driver could drop an internal timer entry without synchronizing with the driver thread that was firing it. The race caused a use-after-free on the timer's waker and task state in safe Rust, which could produce assertion panics, task reference-count corruption, or heap memory corruption. This issue is fixed in 1.54.1.

nodejs node

A flaw in Node.js `crypto` causes the internal entropy caches used by `crypto.randomUUID()`, `crypto.randomUUIDv7()`, and `crypto.randomInt()` to be saved into user-land startup snapshots (`--build-snapshot`) and single executable applications built with `useSnapshot`. If any of these functions, or an API that relies on them such as `URL.createObjectURL()`, is called while the snapshot is built, every process started from that snapshot returns the same values until the cache is refilled: up to 127 UUIDs and about 1,000 `randomInt()` values. Identifiers expected to be unique can collide across processes, and values issued by one process can be predicted by observing another. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.

nodejs node

A flaw in Node.js TLS hostname verification allows a certificate with only a DNS SAN to authenticate an IP endpoint when the client connects using a non-canonical IPv4 spelling, such as `0177.0.0.1`, `0x7f.0.0.1`, `2130706433` or `127.1`. `tls.checkServerIdentity()` did not classify these hosts as IP addresses, but normalized them to their canonical form and matched the result against the certificate DNS names. A certificate containing `DNS:127.0.0.1` and no `IP Address:127.0.0.1` SAN was therefore accepted, while the same certificate is correctly rejected for `127.0.0.1`. Exploitation requires a certificate with a numeric DNS SAN issued by a CA trusted by the client, and a platform resolver that accepts these spellings, such as glibc. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.

nodejs node

A flaw in Node.js HTTP Agent connection reuse can cause a client to accept as valid a response that was sent before the client has sent the request. This is an incomplete fix of CVE-2026-48931. The guard that destroys idle keep-alive sockets when unexpected data arrives only runs when the event loop polls for I/O. If an unsolicited response has already reached the socket but has not been read yet when the socket is handed to a new request, for example because the event loop was busy with synchronous work, the guard is removed without seeing it and the data is parsed as the response to the new request. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.

intranda goobi-viewer-core

The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 22.04 to before version 26.05, the unauthenticated REST endpoint GET /api/v1/index/{solrField}/spatial/search concatenates the user-supplied region query parameter directly into a Solr query string with no escaping, no local-param stripping, and no runtime schema enforcement (the OpenAPI @Schema(pattern=...) annotation is documentation-only at the JAX-RS layer). An attacker can inject Solr local-param syntax ({!parent ...}, {!join ...}) and boolean operators to make access-restricted georeferenced records match the query, bypassing the access-condition filter. This issue has been patched in version 26.05.

intranda goobi-viewer-core

The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 4.11.0 to before version 26.05, several Jakarta WebSocket endpoints in goobi-viewer-core (DownloadTaskEndpoint, CampaignEndpoint, AutocompleteEndpoint, UserEndpoint) accept connections without verifying that the associated HttpSession belongs to a logged-in user, and none validate the Origin header against an allowlist. An unauthenticated attacker can therefore connect to these endpoints; through CampaignEndpoint this allows polluting the in-process crowdsourcing page-lock map and broadcasting forged lock messages, disrupting reviewers' work. This issue has been patched in version 26.05.

intranda goobi-viewer-core

The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, the legacy RSS servlet (RssResolver, GET /rss/) accepts the q and filterQuery parameters and concatenates them into Solr queries without validation. The servlet predates the REST API layer and lacks the input validation present in GET /api/v1/records/rss. q forms the main query body (wrapped only in literal parentheses); filterQuery is passed directly as a Solr fq. An unauthenticated attacker can inject Solr boolean operators to break out of the wrapping and render the trailing access-condition filter-query suffix optional, so that access-restricted records are included in the generated RSS feed. The q and filterQuery parameters are the same underlying vulnerability in the same servlet; q (the main query body) has the broader scope. This issue has been patched in version 26.05.

intranda goobi-viewer-core

The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 23.03 to before version 26.05, SolrTools.cleanUpQuery() strips Solr local-parameter syntax ({!...}) from user-supplied query strings before they reach Solr. Its regex can be bypassed by wrapping the local parameter in a second pair of curly braces ({{!...}}): the outer braces are stripped, the inner {!...} survives intact, and a valid Solr local parameter is forwarded. The flaw is in the shared sanitizer, so it affects any endpoint that routes user input through cleanUpQuery. The double-brace bypass applies from v23.10 (the greedy \{(.+)\} regex); a related bare-!join rewrap path is present. This issue has been patched in version 26.05.

ilbers isar

Isar is an integration system for automated root filesystem generation. In versions 0.11 and newer, /etc/apt/trusted.gpg.d is created manually during bootstrap setup to be able to deploy local keys. By that, the directory is owned by the calling user (the one that executes Isar) instead of root. If the calling user's id is identical to one of an unprivileged user inside the image, this user is able to alter existing keys and deploy new ones, silently breaking the apt repo integrity protection. The issue is has no impact on those images that use an immutable rootfs, or if apt is never invoked. Changing only the keys does not trigger an exploit, it's just one step in a chain. An attacker would also have to manipulate a remote repo or intercept non-secure communication with it. This issue has been patched via commit 29e84ed.

cacti

Cacti is an open source performance and fault management framework. Prior to version 1.2.31, a User Enumeration vulnerability allows an attacker to identify valid usernames on the Cacti service. When a user attempts to log in, the application returns slightly different error messages depending on whether the provided username exists in the system. When username exists on Cacti, in the response, they see Access Denied! Login failed. When it does not exist on Cacti, they see Access Denied! Login Failed. The only difference between the responses is the capitalization of the letter "f" in the word failed. This issue has been patched in version 1.2.31.

cacti

Cacti is an open source performance and fault management framework. From version 1.2.27 to before version 1.2.31, Cacti contains an authenticated stored second-order SQL injection in the automation tree rule item handler. A user holding the Automation realm (default General Administration role) can persist an arbitrary SQL fragment in the automation_tree_rule_items.field column. The fragment is later concatenated directly into a SELECT ... AS source FROM ... clause in lib/api_automation.php :: create_all_header_nodes() and executed when an administrator triggers automation via the standard graphs.php?action=actions&drp_action=8 ("Apply Automation Rules") bulk action. The result of the injected SELECT is written into graph_tree_items.title and rendered in the Cacti tree UI, providing a direct exfiltration channe. This issue has been patched in version 1.2.31.

intranda goobi-viewer-core

The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, when a password reset link is visited, the application generates a replacement password in a predictable way and emails it to the account holder. The insufficient entropy allows the password to be brute-forced by an attacker who can approximate the server-side generation time. Exploiting this finding in isolation requires the victim to have triggered the reset themselves and the attacker to infer the server time from network or email metadata. This issue has been patched in version 26.05.

intranda goobi-viewer-core

The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, the password reset token is predictably based on the time of the reset request. An attacker who knows the target's email address can request a reset and then brute-force the token. Exploiting this finding alone forces an unauthorized password reset on any account. This issue has been patched in version 26.05.

GFI Software GFI Archiver

GFI Archiver before 15.14 contains a stored cross-site scripting vulnerability in the MailInsights scheduled report configuration that allows authenticated attackers to inject arbitrary web script or HTML via the report name parameter to /Archiver/MailInsights.aspx. The injected payload is stored by ReportScheduling.btnSaveReport_Click() without output encoding and is executed in the browser of the user who created the scheduled report when they subsequently view the MailInsights page.

Zimbra Collaboration Suite

A reflected cross-site scripting vulnerability in the login page of Zimbra Collaboration Suite (ZCS) allows an unauthenticated attacker to execute JavaScript through the zrememberme parameter. A crafted relogin URL selects a two-factor error display that inserts the parameter into a hidden input attribute without HTML encoding. A victim who opens the URL receives attacker-controlled script and page content under the legitimate Zimbra origin, allowing credential capture through a replacement login form. The relogin path logs out an existing session before rendering the payload, so the demonstrated attack does not inherit that session's mailbox access. ZCS 10.1.16 and 10.1.17 are affected.

Zimbra Collaboration Suite

An LDAP filter injection vulnerability in Zimbra Collaboration Suite (ZCS) allows an authenticated user to query otherwise unreturned attributes of calendar resources through SearchCalendarResourcesRequest. Zimbra escapes search values but inserts the supplied attribute names directly into LDAP filter expressions without validation. An attacker can inject additional conditions and use repeated matching queries to recover readable resource attributes such as internal mailbox hostnames and mail transport routes. The search remains restricted to calendar-resource objects and the LDAP service account's access rights. ZCS 10.1.16 and 10.1.21 are affected.

Zimbra Collaboration Suite

A cross-account authorization vulnerability in Zimbra Collaboration Suite (ZCS) allows an authenticated user to insert forged shared-file records into another user's mailbox through FileSharedWithMeRequest. The request bypasses delegated-account authorization and accepts attacker-selected file metadata, owner identifiers and declared sizes without validating a corresponding document share. An attacker can plant entries attributed to another real local account without that account sharing a document. No victim interaction is required. ZCS 10.1.16 and 10.1.20 are affected.

Zimbra Collaboration Suite

A CSS sanitization vulnerability in Zimbra Collaboration Suite (ZCS) allows an authenticated user with Briefcase access to publish a document that displays attacker-controlled content under the Zimbra origin. When processing a stylesheet containing non-ASCII characters, DefangFilter appends the final ASCII segment without sanitizing it. HTML stored as application/x-zimbra-doc can therefore retain CSS URL references that the normal sanitizer removes. An attacker can share a crafted document that loads external resources and displays a credential-collection form using Zimbra's own visual assets. Exploitation requires the victim to open the document in a browser that renders the content type inline; credential theft additionally requires form submission. ZCS 10.1.16 and 10.1.20 are affected.

Zimbra Collaboration Suite

A hostname canonicalization vulnerability in the email HTML sanitizers of Zimbra Collaboration Suite (ZCS) allows an unauthenticated sender to bypass the restriction on forms that target the Zimbra host. DefangFilter and the OWASP ActionAttributePolicy compare the form-action hostname with the request hostname before browser URL canonicalization. A percent-encoded hostname can therefore survive sanitization while the browser submits the form to the normal Zimbra origin with the recipient's authentication cookie. This permits authenticated form requests from a crafted email after the recipient opens it in Classic and submits the form. The issue is present in ZCS 10.1.16 and 10.1.21. It does not bypass an endpoint's CSRF-token checks; a state-changing attack additionally requires an endpoint that accepts the resulting request without that protection.

Zimbra Collaboration Suite

An organizer authentication vulnerability in Zimbra Collaboration Suite (ZCS) allows an unauthenticated email sender to insert calendar invitations attributed to another user. The email delivery path permits external invitations but does not verify that the message sender is authorized to use the iCalendar ORGANIZER identity. When automatic invitation insertion is enabled, a crafted REQUEST component creates an event containing attacker-selected meeting details and reminders under a forged organizer without recipient interaction. No corresponding event is created in the claimed organizer's calendar. ZCS 10.1.16 and 10.1.21 are affected.

Zimbra Collaboration Suite

An attendee authentication vulnerability in the email calendar processing of Zimbra Collaboration Suite (ZCS) allows an unauthenticated sender to forge another attendee's response to an existing meeting. Zimbra passes a null sender identity when processing iCalendar REPLY components, causing the attendee authorization filter to be skipped. An attacker who knows the meeting UID, organizer address and attendee address can send a non-outdated reply that changes the attendee's participation status in the organizer's calendar. The change occurs automatically during delivery without organizer or attendee interaction. ZCS 10.1.16 and 10.1.21 are affected.

Zimbra Collaboration Suite

An organizer authentication vulnerability in the email calendar processing of Zimbra Collaboration Suite (ZCS) allows an unauthenticated sender to cancel or modify an existing meeting in a recipient's calendar. Zimbra accepts iCalendar CANCEL and REQUEST components without verifying that the email sender is authorized to act as the supplied organizer. An attacker who knows the meeting UID and organizer address can supply a non-outdated sequence number to move the recipient's meeting to Trash or replace its details. Processing occurs automatically during email delivery without recipient interaction. ZCS 10.1.16 and 10.1.21 are affected.

entireio cli

Entire CLI hooks into Git workflows to capture AI agent sessions. Prior to version 0.7.7, a path traversal vulnerability in Entire CLI allows an attacker with push access to the checkpoints repository to craft malicious checkpoint metadata that causes entire session resume or entire checkpoint rewind to write attacker-controlled transcript data outside of the expected session directory. The issue occurs because checkpoint metadata is fetched from the remote entire/checkpoints/v1 branch and the SessionID field was used to construct filesystem paths without validation in the restore path. A malicious SessionID containing absolute paths or path traversal sequences could cause arbitrary files on the victim’s machine to be overwritten. This issue has been patched in version 0.7.7.

netboxlabs netbox-mcp-server

NetBox MCP Server is a simple read-only Model Context Protocol server for NetBox. Prior to version 1.2.1, when running with TRANSPORT=http, the MCP server has no authentication on the HTTP endpoint. Any client that can reach the port gets a valid MCP session and full access to all four NetBox tools - no token or credential needed. This issue has been patched in version 1.2.1.

openwrt odhcpd

odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. In versions 25.12 and prior, odhcpd's DHCPv6 self-loop detection at dhcpv6.c:720 uses a network-byte-order DUID length value directly as the memcmp() size parameter. On little-endian hosts, this causes memcmp() to read far beyond the stack buffer — a single unauthenticated DHCPv6 packet triggers a 2560-byte overread from a 128-byte buffer. At time of publication, there are no publicly available patches.

Zimbra Collaboration Suite

A mailbox quota-accounting vulnerability in Zimbra Collaboration Suite (ZCS) allows an authenticated user to consume another user’s mailbox quota by repeatedly sharing and revoking a document. Creation of the recipient’s shared-file record charges the document size to mailbox-wide usage. Revocation deletes the record and reverses its folder counters without reversing the mailbox-wide charge. Repeated normal share notifications therefore accumulate quota usage after the visible records are gone. On accounts with a finite quota, this can prevent incoming mail and other size-increasing operations without recipient interaction. The issue affects ZCS 10.1.16 and 10.1.20.

Zimbra Collaboration Suite

An SMTP command injection vulnerability in the data-source testing functionality of Zimbra Collaboration Suite (ZCS) allows an ordinary authenticated user with account options enabled to inject CR/LF into the emailAddress inserted into an SMTP envelope command by a JSON SOAP request. After a successful preliminary POP3 or IMAP login, Zimbra sends the injected commands to the selected SMTP service. If that service accepts the pipelined transaction, the attacker can submit mail with attacker-selected recipients, headers and body content without victim interaction. The vulnerable command-construction path is present in ZCS 10.1.16 and 10.1.20.

yahoo serialize-javascript

serialize-javascript from 7.0.1 before 7.1.3 contains a cross-site scripting vulnerability that allows attackers to break out of HTML script elements by ending serialized function source text with an unescaped </script. Attackers controlling a function's source via a spoofed toString() can combine surrounding output delimiters and later values to inject live markup such as img onerror handlers.

baserproject basercms

baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the public POST /baser/api/bc-mail/mail_messages/add/{mailContentId}.json endpoint accepts submissions without enforcing the form's auth_captcha setting. BcMail\Controller\Api\MailMessagesController::add() and MailMessagesService::create() omit the BcCaptchaService::check() verification of captcha_id and auth_captcha performed by MailController::submit() in the web UI. An unauthenticated attacker who can reach the API can therefore automate submissions without solving the enabled image challenge. The API disables FormProtection and has no rate limit; submissions can generate administrator-inbox spam, send attacker-influenced auto-replies to third parties when an email field is present, and accumulate mail_messages database records when save_info is enabled. The API already enforces the isAccepting() check added for CVE-2026-30878; the missing CAPTCHA check is a separate control failure. This issue has been patched in versions 5.3.2 and 5.4.2.

baserproject basercms

baserCMS is a website development framework. In versions 5.2.5 before 5.3.2 and 5.4.0 before 5.4.2, an unauthenticated visitor can supply a comma-separated address list in a public mail form's email field and cause a single auto-reply to be addressed to multiple third parties. MailMessageMailer::sendFormToUser() passes the visitor-controlled userMail value to parseAndNormalizeMailAddresses(), which splits it with explode(',') and supplies every resulting address to setTo(). Newly created forms with an email-type field are affected when the separate, optional VALID_EMAIL server-side validation is not enabled; browser type=email validation does not prevent crafted requests. The bundled contact form enables VALID_EMAIL and is not affected. The auto-reply uses the site's sender identity and includes partially attacker-controlled content, allowing abuse of the site to deliver unsolicited mail. This issue has been patched in versions 5.3.2 and 5.4.2.

baserproject basercms

baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, an authenticated user with only theme-file view permission can traverse outside the theme directory through the optional BcThemeFile plugin's Admin web screen. ThemeFilesController::parseArgs() constructs a path containing literal ../ segments, and the view and edit actions pass it to ThemeFilesService::get() without containment validation. Authorization checks the unresolved request path, after which ThemeFile::_getContents() reads the resolved file and exposes its contents in the form textarea. A client must preserve the dot segments rather than normalize them away. Readable files are limited to .php, .css, .js, and .ctp; this can disclose application source and config/install.php database credentials in MySQL or PostgreSQL deployments, while SQLite configurations have an empty database password. Reading config/app_local.php may expose the Security.salt fallback, which is effective only when not overridden by environment configuration. The flaw does not disclose .env, .pem, or SQLite .db files, does not itself permit file writes or code execution, and does not affect the separate API getFullpath() route. The plugin is disabled by default and unauthenticated requests are not sufficient. This issue has been patched in versions 5.3.2 and 5.4.2.

conda-forge.github.io

conda-forge is a GitHub organization containing repositories of conda recipes. In commits 85748ad2368a and prior, two React components render externally-sourced strings directly as HTML using dangerouslySetInnerHTML, with no sanitization (the project has no DOMPurify or equivalent dependency). JSON files are produced automatically by the conda-forge autotick bot (regro/cf-scripts) while it processes every conda-forge feedstock and its upstream source artifacts. The error/status strings embed raw output captured from those processes (build logs, patch output, tracebacks). The website renders them verbatim as HTML. At time of publication, there are no publicly available patches.

eventschedule

Event Schedule is an open-source platform to share events, sell tickets and bring communities together. In versions 1.0.0 and prior, App\Utils\UrlUtils::isUrlSafe() is the SSRF guard applied to user-supplied import URLs. It can be bypassed two ways, both reaching internal/localhost services when the URL is later fetched by ImportCuratorEvents (Http::get($url) then the response body is parsed and imported as events, and file_get_contents($ogImage)). At time of publication, there are no publicly available patches.

signalk-server

Signal K Server from 2.28.0-beta.2 before 2.34.0 contains a server-side request forgery vulnerability in the App Store icon fetcher that trusts absolute signalk.appIcon URLs. Attackers publishing npm packages with Signal K keywords can make servers request loopback, vessel network, or cloud metadata endpoints, storing image-typed responses served back via the admin UI.

pdfme common

@pdfme/common from 5.5.10 before 6.2.6 contains a server-side request forgery vulnerability that allows attackers to bypass the isUrlSafeToFetch denylist in getB64BasePdf. Attackers can supply basePdf URLs using IPv4-mapped IPv6, [::], NAT64 or localhost alias hostnames to read loopback, internal or cloud metadata responses through generated documents.

Unknown Advanced Custom Fields: Extended · Unknown Advanced Custom Fields: Extended PRO

The Advanced Custom Fields: Extended and Advanced Custom Fields: Extended PRO WordPress plugins from 0.9.2.4 to 0.9.2.7 do not consistently disable shortcode processing in the confirmation message of their front-end forms, allowing unauthenticated visitors to have arbitrary shortcodes executed server-side when they submit a form whose stored configuration does not carry the relevant setting.

chatwoot

Chatwoot before 4.17.0 contains an authorization bypass vulnerability that allows authenticated agent bots to access other accounts by supplying a foreign contact inbox source_id. Attackers can call the conversations create endpoint with another account's source_id to create or retrieve conversations and post messages to that account's contacts.

diegonehab rply

RPly through 1.1.4 contains an improper array index validation vulnerability in ply_read_header_property() that accepts list as a list property's length or value type. Attackers can supply a crafted PLY file that makes ply_read_list_property() call an out-of-bounds handler, crashing ASCII parsing or corrupting memory in binary parsing.

Unknown Profile Builder

The Profile Builder WordPress plugin from 4.0.0 to 4.0.4 does not enforce its reCAPTCHA verification on all comment submission paths, allowing authenticated users to bypass the anti-spam protection an administrator configured for the WordPress comment form.

elixir-plug plug · elixir-plug plug_crypto

Externally-Generated Error Message Containing Sensitive Information vulnerability in plug_crypto in elixir-plug plug_crypto allows an unauthenticated remote attacker to expose the secret key base through application logs via a wrong-typed argument. Every public function in Plug.Crypto validates argument types in a function-head guard. A failed guard makes the Erlang VM raise FunctionClauseError with the actual argument values in the top stack frame, so the secret key base, a derived key, or the value an API key is compared against lands in that frame. The library's rescue blocks and Plug.Crypto.prune_args_from_stacktrace/1 only reach exceptions raised inside a function body, so they never see a guard failure. Plug.Cowboy and Bandit write the frame to the error log and attach it as crash_reason Logger metadata, which error trackers forward. Two entry points take request data. Plug.Crypto.verify/4 exposes the secret key base when the token is neither a binary nor nil, which Phoenix.Token.verify/4 reaches because it forwards the token unguarded. Plug.Crypto.secure_compare/2 exposes the other operand when one side is not a binary, as happens when a missing request header yields nil. Reading the leaked value needs separate access to the logs or the error tracker, so the request alone does not disclose the secret to the attacker. This issue affects plug: from 1.6.3 before 1.7.0; plug_crypto: from 1.0.0 before 2.2.1.

Eclipse Foundation Eclipse KeyPont - GOSE

`JweDirectDecryptorBlock.Decrypt` read a 64-bit plaintext length from the `_thales_aad` protected-header field and used it without any validation. A truncated field panics `binary.BigEndian.Uint64`, an oversized value drives an unbounded allocation, and a value larger than the decrypted block panics with a slice-bounds error.

Eclipse Foundation Eclipse KeyPont - GOSE

`JweRsaKeyEncryptionDecryptorImpl.Decrypt` passed the JWE's initialization vector to `cipher.AEAD.Open` without checking its length. The Go standard library **panics** rather than returning an error when a GCM nonce is not exactly `NonceSize()` bytes, so a JWE carrying a wrong-sized IV crashes the decrypting goroutine.

Eclipse Foundation Eclipse KeyPont - GOSE

gose parsed the JWS `crit` header into `JwsHeader.Crit` and then never read it. RFC 7515 §4.1.11 requires a recipient to reject a JWS whose listed critical extension parameters it does not understand. gose implements no header extensions, so every token carrying a non-empty `crit` should have been rejected — and none were.

Eclipse Foundation Eclipse KeyPont - GOSE

`LoadPublicKey` resolved an EC key's curve with an unchecked type assertion, `algToOptsMap[alg].(*ECDSAOptions)`. A JWK declaring `"kty":"EC"` together with a non-EC `"alg"` — which RFC 7517 §4.4 permits — reaches that assertion and **panics**.

Eclipse Foundation Eclipse KeyPont - GOSE

`JwtClaims.MarshalJSON` built a Go struct at runtime with `reflect.StructOf`, synthesising a field named `"A" + claimName` for each untyped claim. `reflect.StructOf` **panics** when a field name is not a valid Go identifier, or when it duplicates another field. Both conditions are reachable from ordinary JWT claim names.

Eclipse Foundation Eclipse KeyPont - GOSE

`jwkFields.CheckConsistency` detected duplicate `key_ops` entries with a pairwise nested loop, making validation cost grow with the **square** of the entry count. Because the check runs on every JWK and JWKS unmarshal, a modestly sized but hostile JWKS document could occupy a CPU core for many seconds.

Eclipse Foundation Eclipse KeyPont - GOSE

`JwksTrustStore.Get` assigned each parsed key to the function's **named return value** while refreshing the JWKS cache. When the requested `kid` was not present, the trailing naked `return` handed the caller the last key in the JWKS document together with a `nil` error — a confidently wrong answer instead of "not found".

Eclipse Foundation Eclipse KeyPont - GOSE

`AesGcmCryptor.Open` passed a caller-supplied nonce straight to `cipher.AEAD.Open` without checking its length. The Go standard library **panics** rather than returning an error when a GCM nonce is not exactly `NonceSize()` bytes, so a JWE carrying a wrong-sized IV crashes the decrypting goroutine.

KNIME Analytics Platform

When used as an executor in either KNIME Server or KNIME Business Hub, KNIME Analytics Platform LTS versions before 5.8.4 log configured credentials of proxies during startup. An attacker with access to log files can steal the credentials and use the proxy as the user who configured the proxy settings. The issue has been fixed in LTS versions 5.8.4 and 5.12.0 and later.

Magepeople inc. Car Rental Manager

Missing Authorization vulnerability in Magepeople inc. Car Rental Manager car-rental-manager allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Car Rental Manager: from n/a through 1.5.3.

Knit Pay

Missing Authorization vulnerability in Knit Pay Knit Pay knit-pay allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Knit Pay: from n/a through 9.6.3.0.

CGM CLININET

CGM CLININET is vulnerable to Reflected Cross-Site Scripting (XSS) due to improper neutralization of user-supplied data. A remote unauthenticated attacker can craft a malicious URL containing JavaScript or HTML code, which is executed in the victim's browser when the URL is visited, allowing the attacker to steal session cookies and perform actions on behalf of the victim within the application. The vulnerability was confirmed to affect versions up to 2026.MS3 but later versions may also be vulnerable.

CGM CLININET

The CGM CLININET application runs the cgm-updater process listening on an open network port without any authentication. The vulnerability was confirmed to affect versions up to 2026.MS3 but later versions may also be vulnerable.

CGM CLININET

The CGM CLININET application stores the production database login and password, as well as RabbitMQ broker credentials, in the SysIO.pl configuration file. Insecure file permissions make this file readable by any local account.  This issue was fixed in version 2026.MS3

VertiGIS Ltd. WebOrderSystem (AuftragsManager)

The "ASMobile" web interface, which is part of the VertiGIS software package "GIS Portal", allows authenticated users to define a business reference. JavaScript code can be inserted into this field. On its own this only affects the user who entered it (self-XSS). However, the business reference is included in the order details when the user places an order through the web interface. The order is later listed in the OrderAdministration portal (AuftragsManager) of VertiGIS WebOrderSystem, where the stored code is executed as soon as a highly privileged user opens the order. Version 7.0.8.6 of WebOrderSystem, the latest available at the time of testing, is affected. The vendor did not provide information about further affected versions.

VertiGIS Ltd. WebOrderSystem (KundenManager)

The CustomerAdministration portal (KundenManager) of VertiGIS WebOrderSystem allows privileged users to search for employees across all defined companies (user groups). The search term can be passed in the "searchValue" URL parameter, so the search is performed when a logged-in user opens such a URL. JavaScript code placed in this parameter is executed in the victim's browser. An unauthenticated attacker who knows the URL structure can craft a link that contains script code. The code runs if a privileged user who is currently logged into the portal opens the link. Because administrative users can change the passwords of other users, including administrators, without entering the old password, an attacker may be able to take over accounts or lock out other users. Version 7.0.8.6, the latest available at the time of testing, is affected. The vendor did not provide information about further affected versions.

VertiGIS Ltd. WebOrderSystem (KundenManager)

The CustomerAdministration portal (KundenManager) of VertiGIS WebOrderSystem allows privileged users to manage the employees of defined companies (user groups). User properties, for example the "secondName" parameter, can be filled with JavaScript code while editing a user. The code is stored and executed in the browser of any other privileged user who opens the edited user entry or the user overview of the corresponding user group. An authenticated attacker with access to the portal can use this to run script code in the session of other portal users. Version 7.0.8.6, the latest available at the time of testing, is affected. The vendor did not provide information about further affected versions.

Creative Labs Creative Sound Blaster Katana V2, V2X, SE

An authentication vulnerability in the Bluetooth Low Energy (BLE) implementation of Creative Sound Blaster Katana could allow an attacker within Bluetooth range to connect to an affected device without prior pairing or authentication.

Unknown Advanced Custom Fields: Extended · Unknown Advanced Custom Fields: Extended PRO

The Advanced Custom Fields: Extended WordPress plugin before 0.9.2.8, Advanced Custom Fields: Extended PRO WordPress plugin before 0.9.2.8 does not validate or escape some of its form shortcode attributes, which can be pointed at values taken from the visitor's own request and are then output without escaping, allowing users with a role as low as contributor to have arbitrary script run in the browser of anyone led to open a crafted link or page, including a logged-in administrator. This is an incomplete fix for CVE-2023-5292, whose deny-list covers only the three HTML wrapper attributes.

Unknown Depicter — Popup & Slider Builder

The Depicter — Popup & Slider Builder WordPress plugin before 4.8.2 does not properly validate uploaded files in its editor media-upload endpoint, checking only the client-supplied MIME type and a case-sensitive block of the .php extension, which allows users with the Editor role and above to upload files with other active extensions into the public uploads directory, leading to stored script execution in the site origin and, depending on the server's handler mapping, to code execution.

Unknown Download Monitor

The Download Monitor WordPress plugin before 5.3.5 does not correctly restrict management of the list of filesystem locations it may serve files from to network administrators on multisite, allowing a subsite administrator who is not trusted at the network level to approve arbitrary locations and have the Download Monitor WordPress plugin before 5.3.5 serve readable files from outside the uploads directory, including files belonging to other subsites, to unauthenticated visitors; single-site installations are unaffected.

Unknown User Profile Builder

The User Profile Builder WordPress plugin before 4.0.5 does not sanitise and escape one of its shortcode attributes before outputting it back in a redirect message, which could allow users with a role as low as contributor to perform Stored Cross-Site Scripting attacks against higher-privileged users who submit the affected form.

Unknown Speed Optimizer

The Speed Optimizer WordPress plugin before 7.8.5 does not verify network-level privilege before applying an option change to the whole multisite network, nor restrict which option may be changed, allowing a site administrator who is not a Super Admin to create or overwrite network-wide options.

Unknown Otter Blocks

The Otter Blocks WordPress plugin before 3.2.8 does not enforce its block visibility conditions when a published post is rendered through the WordPress REST API, allowing unauthenticated users to read block content that the site owner restricted to specific roles, logged-in users, the post author, categories or tags, or (on the Pro tier) Stripe purchasers.

Unknown Otter Blocks

The Otter Blocks WordPress plugin before 3.2.8 does not correctly determine whether a post is publicly readable before returning its data through a REST API endpoint, treating any post with the published status as public, allowing unauthenticated users to read manual excerpts of password-protected posts, the content and titles of non-public post types, and, on WooCommerce sites, coupon codes and their descriptions.

Unknown Otter Blocks

The Otter Blocks WordPress plugin before 3.2.8 does not properly sanitize and escape user-supplied block styling values before writing them into an inline stylesheet, allowing users with contributor-level access and above to inject arbitrary web scripts that execute when any visitor, including administrators, views the affected post.

Part-DB-server

Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB contains a spreadsheet formula injection vulnerability in the part import/export workflow. An authenticated user with permission to import parts can import a CSV file containing formula-prefixed values, such as =1+1, into user-controlled part fields. When the affected part is later exported as an XLSX spreadsheet, Part-DB writes the attacker-controlled value using PhpSpreadsheet's setCellValue() method without neutralising spreadsheet formula characters. As a result, the exported XLSX file contains an executable spreadsheet formula cell rather than a plain text value. If another user exports and opens the spreadsheet, the formula may be evaluated by their spreadsheet software. This issue has been patched in version 2.13.2.

Part-DB-server

Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB allows authenticated API users to bypass the configured maximum attachment file size by uploading attachments through the API using base64-encoded file data. The application enforces the configured attachment size limit for normal browser-based file uploads, but the API base64 upload path does not apply the same size validation. As a result, an authenticated user with API access and permission to create attachments can upload files larger than the configured maximum attachment size, potentially exhausting disk space and causing a denial of service. This issue has been patched in version 2.13.2.

Part-DB-server

Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB allows authenticated users to bypass the configured maximum attachment file size when using the server-side “Download external file” attachment feature. When server-side attachment downloads are enabled, Part-DB downloads the remote file and streams it directly to disk without enforcing the configured MAX_ATTACHMENT_FILE_SIZE limit. As a result, an authenticated user who can create or edit attachments can cause Part-DB to store files larger than the configured maximum attachment size, potentially exhausting disk space and causing a denial of service. This issue has been patched in version 2.13.2.

Part-DB-server

Part-DB is an open source inventory management system for electronic components. Prior to version 2.12.3, Part-DB-server sanitizes SVG files based solely on the user-controlled filename extension rather than actual file content type. An authenticated attacker can upload a malicious SVG with JavaScript payload using a non-SVG extension (e.g., .jpg), bypassing sanitization entirely. When any user views the attachment inline, the browser receives Content-Type: image/svg+xml and executes the embedded script in the Part-DB origin. This issue has been patched in version 2.12.3.

lookyloo

Lookyloo is a web interface that allows users to capture a website page and then display a tree of domains that call each other. Prior to version 1.39.4, an unauthenticated user can trigger Lookyloo's "report a capture" email on demand (this is expected). The /json/<uuid>/report API endpoint (CaptureReport) is incorrectly passing the email and comment parameters, overwriting as_admin. When True, as_admin will trigger a search query on a MISP instance (if configured) and add a list of matching URLs in the email sent to the analyst (not the submitter, so there is no risk of leaking information) . It could potentially cause a DoS on the MISP instance. This issue has been patched in version 1.39.4.

OpenStack Ironic

OpenStack Ironic before 39.0.1 allows DELETE and GET via vendor_passthru, e.g., to delete accounts from the BMC's Redfish service.

OpenStack Ironic

OpenStack Ironic before 39.0.1 sometimes allows a user to change the maintenance setting on a node via PATCH to /v1/nodes/{ident} - in other words, not using the specific maintenance endpoint.

Part-DB-server

Part-DB is an open source inventory management system for electronic components. Prior to version 2.12.2, Part-DB renders BOM validation information messages using Twig's |raw filter. These messages include translated placeholders populated with user-controlled Part names. A user who can edit a Part name can store HTML markup in the Part name. When another user imports a BOM CSV referencing that Part ID, the malicious Part name is rendered as HTML in the victim's BOM validation result page. This results in a cross-user stored HTML injection issue. JavaScript execution appears to be blocked by the current Content Security Policy, but arbitrary HTML links, forms, images, and CSS-based UI elements can still be injected into a trusted Part-DB page. This issue has been patched in version 2.12.2.

Part-DB-server

Part-DB is an open source inventory management system for electronic components. Prior to version 2.12.1, the file .env committed in the Part-DB repository contains a fixed value for APP_SECRET (a03498528f5a5fc089273ec9ae5b2849). The official Docker image jbtronics/part-db1 does not override or randomize this value at container start-up. Because Symfony uses APP_SECRET (via kernel.secret) as the HMAC key for signing remember-me cookies, any attacker who knows the secret -- or fetches it from the public repository -- can forge an arbitrary-user remember-me cookie and gain a fully authenticated session with no credentials required. This issue has been patched in version 2.12.1.

Part-DB-server

Part-DB is an open source inventory management system for electronic components. Prior to version 2.12.1, LogEntryExtraFormatter builds the HTML shown in the "Extra" column of the activity-log table (/log) and in element history tables. Every branch of LogEntryExtraFormatter::getInternalFormat() runs user-controlled strings through htmlspecialchars() before placing them into the HTML it returns — except the CollectionElementDeleted branch, which interpolates getOldName() (and getCollectionName()) into a sprintf() template with no escaping. The returned string is emitted by LogEntryExtraColumn::render() and inserted as raw HTML into the DataTables cell (the bundle does not escape column output; sibling columns call htmlspecialchars() themselves). CollectionElementDeleted.getOldName() is the name of a deleted collection sub-element — a part Parameter, Attachment, PartLot, Orderdetail, etc. — all freely set by any user with edit rights on the owning element. A low-privileged content editor can therefore store an HTML/script payload as the name of such a sub-element, delete it (which writes the log entry), and have that markup parsed as live DOM in the browser of a higher-privileged victim (an administrator/auditor with system.show_logs, or any user viewing that element's history). This is a stored cross-site-scripting / HTML-injection defect caused by a single missed sanitizer in one sibling branch. CSP policies block inline javascript execution under normal conditions. This issue has been patched in version 2.12.1.

OpenStack Ironic

OpenStack Ironic through 39.0.1 allows a denial of service via a configdrive that results in a very large amount of uncompressed data, aka a gzip bomb.

gedelumbung HospitalManagement

A weakness has been identified in gedelumbung HospitalManagement up to c2d45543789a3887067d3915f69d44cfc2cf76a8. This affects the function simpan of the file application/modules/admin/controllers/routing_pages.php of the component URL Validation. This manipulation of the argument url_route causes open redirect. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.

gedelumbung HospitalManagement

A security flaw has been discovered in gedelumbung HospitalManagement up to c2d45543789a3887067d3915f69d44cfc2cf76a8. The impacted element is the function simpan of the file application/modules/admin/controllers/routing_pages.php of the component Admin Routing Page. The manipulation of the argument content results in cross site scripting. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7 · Red Hat Enterprise Linux 8

A flaw was found in the iscsiuio component of open-iscsi. The DHCPv6 option parser calls strlen() on raw network data without ensuring a NUL terminator is present, causing it to read past the buffer into heap memory. This can result in a daemon crash, a 1-byte heap overwrite, or corruption of the iSCSI initiator name. An attacker on the same network segment can trigger this by sending a crafted DHCPv6 Advertise message.

gedelumbung HospitalManagement

A vulnerability was determined in gedelumbung HospitalManagement up to c2d45543789a3887067d3915f69d44cfc2cf76a8. Impacted is the function kirim of the file application/modules/web/controllers/contact.php of the component Contact Form. Executing a manipulation of the argument nama/email/alamat/telepon/pesan can lead to cross site scripting. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet.

Kiloview E3 Firmware

Authentication tokens issued by the E3's web management interface on login are given an expiration time far beyond any reasonable session lifetime, effectively making them non-expiring. A token obtained through interception or device compromise remains valid for authenticated access for an extended period.

Red Hat OpenShift Container Platform 4

A flaw was found in the OpenShift client oc. When extracting container image layers with oc image extract, the application fails to properly sanitize symbolic and hard link targets pointing to absolute paths or to sibling directories of the extraction destination. An attacker who supplies a malicious container image can exploit this vulnerability by embedding links, and a chained file entry, that reference locations outside the intended extraction directory. This allows the attacker to write attacker-controlled content to arbitrary locations on the host filesystem with the privileges of the user running the command, potentially leading to file modification outside the destination directory.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7 · Red Hat Enterprise Linux 8

A flaw was found in FreeIPA. An improper authorization check allows an authenticated host to retrieve and revoke digital certificates assigned to other users or services. This issue occurs because FreeIPA verifies ownership solely by matching the host name to the certificate's subject Common Name (CN), without confirming actual ownership in the directory service. Consequently, an enrolled host can disrupt services by revoking certificates belonging to other entities.

authlib

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, Authlib's RFC 9101 JWTAuthenticationRequest passes the unauthenticated, client-controlled request_uri parameter to the abstract get_request_object() hook before applying a destination or registration policy; the hook itself performs no network request, while the documentation demonstrates an unrestricted HTTP fetch. In deployments whose integrator implements that hook as an unrestricted outbound fetch, a remote attacker who knows a valid public client identifier can make the authorization server request internal, link-local, or otherwise unintended URLs and can distinguish fetch outcomes through different error responses and timing. Deployments whose custom hook already applies a secure allowlist, destination controls, and retrieval limits are not affected. The JWTAuthenticationRequest implementation in authlib/oauth2/rfc9101/authorization_server.py forwards request_uri to get_request_object() before an application-approved retrieval policy accepts the destination. This issue is fixed in version 1.9.0.

authlib

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, OpenIDImplicitGrant.validate_authorization_request() checks the client-controlled raw request.payload.scope for openid after the parent grant has filtered allowed scopes into request.scope. A registered client permitted an ID token response type but not the openid scope can add openid to the request, obtain user consent, and receive a signed ID token containing the user's subject and allowed profile claims. Authorization code flow and deployments that allow openid for every client permitted an ID token response are not affected. In authlib/oidc/core/grants/implicit.py, OpenIDImplicitGrant.validate_authorization_request() checks request.payload.scope instead of the filtered request.scope. This issue is fixed in version 1.9.0.

authlib

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, the default RFC 7523 JWTBearerGrant.get_audiences() returns an empty list, causing JWTBearerGrant.verify_claims() to require only that an aud claim exists without matching the current authorization server. An attacker holding a legitimate assertion for another service can present it to a server that shares the signing key and uses the default grant, obtaining an access token across a trust boundary. Implementations that override get_audiences() with the server's valid audience identifiers are not affected. This issue is fixed in version 1.9.0.

authlib

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, OpenIDMixin.parse_id_token() reads the nonce_supported decision from the untrusted ID token being validated and sets the expected nonce to null when that claim is the JSON boolean false. In implicit and hybrid relying parties, or applications that directly accept externally supplied ID tokens, an attacker with a captured validly signed token can bypass the nonce-to-session binding and replay the victim's token into an attacker-controlled session. Plain authorization code flow is not affected, and the token must still pass signature, issuer, and audience validation. OpenIDMixin.parse_id_token() trusts nonce_supported in both authlib/integrations/base_client/sync_openid.py and authlib/integrations/base_client/async_openid.py to disable the expected nonce. This issue is fixed in version 1.9.0.

Kiloview E3 Firmware

The ONVIF device service on the E3 responds to certain informational requests without requiring authentication. A remote, unauthenticated party can retrieve detailed device identifiers along with a list of configured user accounts and their privilege levels. This aids attackers in fingerprinting vulnerable devices and preparing targeted credential attacks.

Kiloview E3 Firmware

A vulnerability exists in the the time zone parameter and does not properly validate user input, which may allow an authenticated user to cause /etc/localtime to point to a file outside the intended zoneinfo directory .

Python Software Foundation CPython

tarfile.tar_filter could be bypassed using crafted link entries, including symlinks with empty or directory-like names, to redirect later archive members outside the intended extraction directory. This allowed a malicious tar archive to cause tarfile.extractall() with filter="tar" to write files outside the destination directory, subject to the permissions of the extracting process. This is the tarfile.tar_filter counterpart of CVE-2026-7774, which covered tarfile.data_filter.

jitsucom jitsu

Jitsu console before 2.14.0-beta.41 contains an incorrect authorization vulnerability in sources/state.ts handlers that call findFirst without await, so the syncId ownership check never fails. Authenticated users knowing another workspace's sync ID can read, overwrite or delete its stream cursors, causing data re-ingestion or skipped data.

unclecode crawl4ai

Crawl4AI 0.7.0 before 0.9.5 contains an inefficient regular expression complexity vulnerability in the Docker API server that allows authenticated API clients to supply unbounded regular expressions in /crawl request bodies. Attackers can submit catastrophic-backtracking patterns via RegexExtractionStrategy.custom, RegexChunking.patterns or JsonCss, JsonXPath and JsonLxml schema regex fields against a crafted page to freeze the entire server, including /health.

NationalSecurityAgency ghidra

Ghidra before 12.2 contains an improper handling of highly compressed data vulnerability in ExtensionUtils.unzipToInstallationFolder() that allows attackers to exhaust disk space. Attackers can persuade users to install a crafted zip bomb extension archive that expands without size limits, causing later writes by Ghidra and other applications to fail.

NationalSecurityAgency ghidra

Ghidra before 12.2 contains a resource allocation without limits vulnerability in FileSystemIndexHelper used by TarFileSystem and ZipFileSystem, which store unbounded archive entries. Attackers can persuade a user to open or batch-import a crafted TAR or ZIP archive with excessive entries to exhaust the Java heap and hang the session.

Hewlett Packard Enterprise (HPE) ArubaOS (AOS)

A buffer overflow vulnerability exists in AOS-8 that could allow an authenticated attacker with administrative access to cause denial of service. Successful exploitation could allow an attacker to crash the system, preventing it from rebooting without manual intervention and disrupting network operations.

Hewlett Packard Enterprise (HPE) ArubaOS (AOS)

An arbitrary file deletion vulnerability exists in the command line interface of AOS-10 that could allow an authenticated attacker with administrative privileges to cause a denial of service. Successful exploitation could allow an attacker to crash the system, preventing it from rebooting without manual intervention and disrupting normal operation of the affected device.

Hewlett Packard Enterprise (HPE) ArubaOS (AOS)

An authentication bypass vulnerability in the PAPI protocol of AOS-8 could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to make limited unauthorized modifications to certain settings of the affected system.

Hewlett Packard Enterprise (HPE) ArubaOS (AOS)

A stored cross-site scripting (XSS) vulnerability exists in the web-based management interface of AOS that could allow an authenticated remote attacker with high privileges to inject malicious scripts. Successful exploitation could allow an attacker to execute arbitrary script code in the context of another authenticated user's browser session.

Hewlett Packard Enterprise (HPE) ArubaOS (AOS)

An authentication bypass in the PAPI protocol of AOS-10 allows an unauthenticated adjacent attacker to circumvent existing authentication controls. Successful exploitation allows an attacker to change the state of certain settings of a vulnerable system.

Hewlett Packard Enterprise (HPE) ArubaOS (AOS)

An unauthenticated command injection vulnerability exists in the command line interface of AOS-10. Successful exploitation could allow an attacker with physical access to execute arbitrary commands as a privileged user on the underlying operating system leading to complete system compromise.