Samedi 24 octobre 2026

CVE-2026-114406 6.8 Moyenne 03:17

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8

The system certificate authority (CA) store in Red Hat products, distributed via ca-certificates RPM packages, included multiple root CA certificates of authorities, which signed intermediate CA certificates with weak private keys issued by the eMudhra certificate authority. A man-in-the-middle attacker could use this flaw to issue certificates for arbitrary host names signed by the weak intermediate CA certificates, which would be considered trusted by a TLS/SSL client using system CA store and cause such clients to connect to malicious sites. Due to inability to only distrust specific intermediate certificates in all clients using the system CA store, root CA certificates of authorities that signed weak intermediate CA certificates are being removed.

CVE-2026-10139 9.1 Critique 01:17

Totolink

A stack-based buffer overflow vulnerability exists in the Mcli functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

CVE-2026-105933 2.3 Faible 01:17

Apache Software Foundation Apache Pulsar

Apache Pulsar allows an administrator to require end-to-end message encryption for all topics in a namespace by setting the encryption_required namespace policy. When this policy is set, the broker rejects messages that are published without encryption. When the broker loads a persistent topic, it reads the namespace policies and the topic-level policies as part of topic initialization. If a step of this initialization fails, for example because of an error reading from the metadata store, a failure loading the topic-level policies or a failure in a later initialization step, the broker logs a warning, disables the encryption requirement for that topic, and completes the topic load as if it had succeeded. The topic is then served with encryption_required not enforced, even though the namespace policy requires it. Topic-level policies that could not be loaded are also not applied. While the encryption requirement is not enforced, an authenticated client with permission to produce to the affected topic can publish messages that are not encrypted, and the broker accepts and stores them. This applies both to producers created after the topic was loaded and to producers that were already connected. Messages published with encryption remain encrypted; the issue does not expose the content of encrypted messages or the encryption keys. The condition is not limited to transient failures. If the cause of the initialization failure persists, the encryption requirement is disabled again each time the topic is loaded, for example after a topic unload, a namespace bundle reassignment or a broker restart. An update to the namespace policies restores enforcement on a loaded topic, but only until the topic is loaded again. Enforcement is reliably restored only once the underlying cause of the failure has been resolved and the topic has been loaded again. The broker logs a warning when the encryption requirement is disabled, but the topic load is reported as successful and the state of the encryption requirement is not shown in the topic statistics. In fixed versions, a failure during topic initialization causes the topic load to fail so that it can be retried, instead of loading the topic with the encryption requirement disabled. This issue affects Apache Pulsar versions from 1.22.0-incubating before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who rely on encryption_required and cannot upgrade immediately can monitor the broker logs for warnings containing "isEncryptionRequired will be set to false" (the exact wording of the message differs between releases), resolve the underlying cause of the failure, and then reload the affected topic and confirm that the warning does not recur.

CVE-2026-73851 6.1 Moyenne 01:10

microsoft kiota

Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.34.0, an attacker who controls or tampers with the OpenAPI description consumed by Kiota can supply a file reference that resolves outside the manifest package (e.g. ../../../../etc/passwd, an absolute path, or a file:// / http(s):// URI). When the generated manifest is deployed and consumed by an AI host, this can lead to inclusion or disclosure of files outside the intended package boundary. This vulnerability is fixed in 1.29.1 and 1.34.0.

CVE-2026-10032 6.1 Moyenne 01:10

Google @a2ui/web_core · Google a2ui\/web core

The openUrl function in @a2ui/web_core passes an agent-controlled URL directly to window.open() without validating the URI scheme. A malicious agent can supply a javascript: URI as the url argument of a Button component's functionCall action. When the user clicks the rendered button, arbitrary JavaScript executes in the victim application's browser origin, constituting a stored/reflected XSS with Critical severity. No non-default configuration is required; the Basic Catalog is enabled by default.

CVE-2026-69250 7.5 Élevée 01:10

FlowiseAI Flowise

Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.3, the OAuth2 token refresh endpoint POST /api/v1/oauth2-credential/refresh/:credentialId is unauthenticated by design and performs a server-side HTTP request to the credential-controlled accessTokenUrl without SSRF protections. Runtime validation confirmed that the endpoint was reachable without authentication, triggered outbound POST requests to an attacker-controlled server, reflected the full remote response body to the caller through tokenInfo, and sent client_id, client_secret, grant_type=refresh_token, and refresh_token in the request body. This issue is fixed in version 3.1.3.

CVE-2026-67199 6.5 Moyenne 01:10

perspective-dev perspective

Perspective 5.0.0 contains a denial of service vulnerability that allows remote attackers to block the server event loop indefinitely by submitting a crafted expression containing unbounded for or while loop constructs in a TableMakeViewReq message. Attackers can embed an arbitrarily large iteration count in an expression column evaluated once per table row, causing the Tornado IOLoop to block without any iteration cap, deadline, or cancellation check, rendering the server unresponsive to all connected clients.

CVE-2026-67195 8.8 Élevée 01:10

perspective-dev perspective

Perspective 5.0.0 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary operating system commands by submitting crafted expression strings to the PolarsVirtualServer backend, which passes client-supplied input directly to Python's eval() with only __builtins__={} cleared. Attackers can exploit Python object attribute traversal through the interpreter's loaded class list to reach subprocess.Popen via a TableValidateExprReq or TableMakeViewReq protobuf message, achieving arbitrary command execution in the Perspective host process.

CVE-2026-63252 7.5 Élevée 01:10

Eclipse Foundation Eclipse Milo · Eclipse milo

In Eclipse Milo versions 0.6.0 through 1.1.4, UASC server transport handlers fail to release retained partial message chunks when a channel disconnects, allowing a remote unauthenticated client to exhaust pooled direct memory by repeatedly sending incomplete chunks and disconnecting, potentially terminating the server.

CVE-2026-63248 6.5 Moyenne 01:10

Eclipse Foundation Eclipse Milo · Eclipse milo

In Eclipse Milo versions 0.6.0 through 1.1.4, OPC UA server diagnostics nodes do not enforce access authorization. An anonymous client can enable diagnostics over a None/None endpoint without a certificate; with a trusted client application certificate over SignAndEncrypt, it can read security diagnostics for other active sessions, exposing usernames, login history, authentication mechanisms, security modes and policies, and public client certificates.

CVE-2026-62927 7.5 Élevée 01:10

Eclipse Foundation Eclipse Milo · Eclipse milo

In Eclipse Milo versions 1.0.0 through 1.1.4, the Call service dispatches the original mixed batch to address-space handlers after calculating authorization, allowing an anonymous or otherwise low-privileged client to execute a denied method by batching it with an allowed method.

CVE-2026-61387 7.5 Élevée 01:10

Eclipse Foundation Eclipse Milo · Eclipse milo

In Eclipse Milo versions 1.0.0 through 1.1.4, monitored-item quota accounting is not exception-safe: if item creation fails with an unchecked error, the server-global reservation is not restored. Deeply nested PubSub ExtensionObjects in a `CreateMonitoredItems` event filter can trigger a `StackOverflowError` during decoding, allowing an unauthenticated remote client to exhaust a finite global monitored-item quota and prevent all clients from creating new monitored items until restart. Existing monitored items and other server functions remain unaffected.

CVE-2026-60007 7.4 Élevée 01:10

Eclipse Foundation Eclipse Milo · Eclipse milo

In Eclipse Milo versions 0.6.0 through 1.1.4, username-token processing returns distinguishable errors for invalid RSA PKCS#1 v1.5 padding and other authentication failures, allowing an on-path attacker who captures a victim's `Basic128Rsa15`-encrypted username token to use repeated unauthenticated `ActivateSession` requests as a padding oracle, recover the victim's password, and authenticate with the recovered credentials.

CVE-2026-58080 8.2 Élevée 01:10

Eclipse Foundation Eclipse Milo · Eclipse milo

In Eclipse Milo versions 1.0.0 through 1.1.4, `OpcUaServerConfig.copy()` fails to preserve a configured `RoleMapper`. On servers that rely on role permissions and construct the running configuration through `copy()`, sessions receive no role IDs and the default access controller skips role-permission checks, allowing an anonymous client where anonymous sessions are permitted to read role-permission metadata, invoke protected methods, or delete protected nodes.

CVE-2026-18806 7.1 Élevée 01:10

TÜBİTAK BİLGEM Software Technologies Research Institute pardus-image-writer

External control of file name or path vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute pardus-image-writer allows Removing Important Client Functionality. This issue affects pardus-image-writer: before 0.9.0.

CVE-2026-66883 6.3 Moyenne 01:10

Erlang Ecosystem Foundation oidcc_plug

Improper Handling of Case Sensitivity vulnerability in Erlang Ecosystem Foundation oidcc_plug (Oidcc.Plug.Authorize module) renders the user agent session binding inert, removing a defense in depth control against replay of a stolen session. This vulnerability is associated with program files lib/oidcc/plug/authorize.ex and lib/oidcc/plug/authorization_callback.ex, and program routines Oidcc.Plug.Authorize.call/2 and Oidcc.Plug.AuthorizationCallback.call/2. Oidcc.Plug.Authorize.call/2 reads the initiating client's user agent with get_req_header(conn, "User-Agent"). Plug lowercases incoming header names, but get_req_header/2 matches the supplied key exactly and performs no normalization of its own, so the mixed-case lookup always returns an empty list and nil is written into the session. On the callback side, Oidcc.Plug.AuthorizationCallback treats a stored nil user agent as nothing to compare and returns :ok without inspecting the request. The two behaviours combine so that the check passes unconditionally on every request, including for deployments that explicitly opted in with check_useragent: true, and an authorization callback can be completed from a different user agent than the one that initiated the flow without detection. The check fails open silently, with no error and no log entry, so a deployment cannot tell the binding is absent. The impact is limited to defense in depth. The inert check does not by itself allow an attacker to complete an authorization flow; it removes one layer that would otherwise hinder use of a stolen or leaked session, such as an exfiltrated session cookie replayed from a different client. The CSRF/state, nonce, and PKCE checks are unaffected and continue to function. Deployments that never enabled check_useragent are not affected in practice, since they never expected the binding. The corresponding lookup in Oidcc.Plug.AuthorizationCallback correctly uses the lowercase key and is not affected. This issue affects oidcc_plug: from 0.1.0-alpha.3 before 0.5.0.

CVE-2026-16881 8.7 Élevée 01:10

LY Corporation LINE client for Android

A code injection vulnerability exists in the LINE Android app prior to version 26.7.2. The profile rendering component does not adequately validate or sandbox externally supplied script content embedded in profile templates. As a result, an attacker who is able to place crafted content in a profile could cause unintended code to execute with the application's privileges when a victim views that profile. A server-side mitigation has been deployed that also protects existing Android clients that have not been updated to version 26.7.2.

CVE-2026-58044 3.7 Faible 01:10

nodejs node

A flaw in Node.js HTTP client can cause a request desynchronization for Node.js-based forwarding proxies that rebuild outbound headers from the visible `IncomingMessage` headers while piping the original body to a reused backend connection. Node.js can omit headers beyond `maxHeadersCount` / `maxHeaderPairs` from `req.headers`, `req.rawHeaders`, and `req.headersDistinct`, while still using those omitted headers internally for HTTP message framing. In particular, `Content-Length` can be hidden from userland while the request body is still delivered. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**.

CVE-2026-2411 6.5 Moyenne 01:10

zephyrproject zephyr

Zephyr's Bluetooth host declares a GATT characteristic as two consecutive attributes: a Characteristic Declaration whose permission is hard-coded to BT_GATT_PERM_READ, and a Characteristic Value attribute that carries the application-specified security permissions (e.g. BT_GATT_PERM_READ_ENCRYPT / READ_AUTHEN / READ_LESC). The public notify and indicate APIs explicitly accept either attribute, and passing the declaration is the documented, common idiom. Before sending each notification or indication, the host re-checks link security with bt_gatt_check_perm() against params->attr in gatt_notify(), gatt_indicate(), and gatt_notify_multiple_verify_params() (subsys/bluetooth/host/gatt.c). When the application passed the Characteristic Declaration attribute, the host correctly redirected the value handle but left params->attr pointing at the declaration, so the security check evaluated the declaration's permissions (no security required) instead of the value's. As a result the encryption/authentication/LESC requirement configured on the characteristic value was skipped. The Notify-Multiple path additionally used a mask that omitted the LE Secure Connections requirement. A remote peer triggers the disclosure by connecting (optionally without pairing or encryption) and writing the Client Characteristic Configuration descriptor to enable notifications or indications, causing the server to emit the protected value over a link that has not reached the required security level. The impact is information disclosure / access-control bypass for characteristic values the application intended to expose only over a secured link; exposure depends on the application declaring encrypt/authen-required notify/indicate characteristics and on the CCC being writable at a lower security tier. There is no memory-safety or availability impact. The fix adds bt_gatt_attr_resolve_value(), which maps a declaration attribute to the following value attribute before the permission check, and switches the Notify-Multiple path to the full BT_GATT_PERM_READ_ENCRYPT_MASK so the LESC requirement is also enforced.

CVE-2026-10773 5.4 Moyenne 01:10

zephyrproject zephyr

The DHCPv4 client helper net_dhcpv4_msg_type_name() in subsys/net/lib/dhcpv4/dhcpv4.c indexes a static 8-element const char * name table after a faulty bounds check. The guard used msg_type <= sizeof(name) instead of msg_type <= ARRAY_SIZE(name); sizeof returns the byte size of the pointer array (32 on 32-bit, 64 on 64-bit targets) rather than the element count of 8, so message-type values from 9 up to that byte size pass the check and cause name[msg_type - 1] to read past the end of the array. The msg_type value originates from the DHCP MESSAGE TYPE option, which is read as an unchecked raw byte from a received packet (net_pkt_read_u8) and passed unmodified into the lookup. A DHCP server, or any host able to inject a spoofed DHCP reply onto the client's link, can therefore drive the index out of bounds. The out-of-range slot yields a garbage const char * that is then dereferenced by a %s log conversion. The lookup is reached only from a debug log statement (NET_DBG / LOG_DBG), so the out-of-bounds read is triggerable only when the DHCPv4 log module is built at DEBUG level (CONFIG_NET_DHCPV4_LOG_LEVEL_DBG), which is not the default configuration. When that condition holds, the result is an out-of-bounds read and a wild-pointer dereference: most likely a crash of the DHCP client (denial of service) and potentially disclosure of an adjacent pointer's contents through the log output. The fix replaces sizeof with ARRAY_SIZE, restoring the correct 1..8 acceptance window.

CVE-2026-9044 8.0 Élevée 01:10

TP-Link Systems Inc. AXE75 V1 · Tp-link archer axe75 firmware

An OS command injection vulnerability exists in the VPN module of TP-Link AXE75 V1 routers. This vulnerability allows an adjacent, authenticated attacker to execute arbitrary commands on the device by importing a specially crafted VPN client configuration file. The issue arises from improper filtering of special characters. Successful exploitation of this vulnerability may enable an attacker to gain full control of the affected device, potentially compromising configuration integrity, network security, and service availability.

CVE-2026-54785 6.2 Moyenne 01:10

eLyiN gemini-bridge

gemini-bridge is a lightweight MCP server bridging AI agents to Google's Gemini AI via the official CLI. From 1.0.0 until 1.3.1, consult_gemini_with_files in inline mode read any file path supplied in the files argument without confining it to the working directory, then forwarded the contents to the Gemini CLI. Because the caller also controls query, the file contents are echoed back through the Gemini round-trip (and sent to Google), making this an arbitrary local file read. This issue is fixed in version 1.3.1.

CVE-2026-62999 7.5 Élevée 01:10

copier-org copier

Copier is a library and CLI app for rendering project templates. From 9.5.0 through 9.16.0, percent-encoded parent-directory segments or encoded path separators in a template URL can match a configured trusted repository prefix before an HTTP server or Git transport decodes the path, allowing unsafe template features from a repository outside the trusted prefix to run after user interaction. This issue is fixed in version 9.17.0.

CVE-2026-62324 5.4 Moyenne 01:10

xdan jodit

Jodit Editor is a WYSIWYG editor with a built-in file browser & image editor. Prior to 4.12.31, Jodit's sanitizeHTMLElement method fails to use isDangerousUrl to normalize javascript: href values before checking the scheme, allowing case variants, control-byte prefixes, and embedded tabs or newlines to bypass filtering and execute attacker-controlled script when a victim clicks a stored link rendered by an application. This issue is fixed in version 4.12.31.

CVE-2026-53510 8.1 Élevée 01:10

savonrb savon

Savon is a Ruby SOAP client. From 0.9.8 until 2.17.2, Savon::Model .all_operations interpolates attacker-controlled WSDL operation names into Ruby source passed to module_eval, allowing Ruby code execution in the application process. This issue is fixed in version 2.17.2.

CVE-2026-25552 3.7 Faible 01:10

TryGhost Ghost-CLI

Ghost CLI before 1.30.1 contains an IP spoofing vulnerability that allows unauthenticated remote attackers to bypass rate-limiting controls by manipulating the X-Forwarded-For header through a misconfigured Nginx configuration. Attackers can append attacker-controlled values to the header chain using the $proxy_add_x_forwarded_for directive to present an arbitrary IP address, circumventing Ghost's rate-limiting mechanisms on self-hosted instances.

CVE-2026-54725 9.6 Critique 01:10

bank-vaults vault-secrets-webhook

vault-secrets-webhook is a Kubernetes mutating webhook that makes direct secret injection into Pods possible. Prior to 1.23.1, parseVaultConfig() in pkg/webhook/config.go accepts the vault.security.banzaicloud.io/vault-addr annotation, MutateConfigMap and MutateSecret call newVaultClient in pkg/webhook/webhook.go, and vault.security.banzaicloud.io/vault-serviceaccount can cause a ServiceAccount JWT to be sent to an attacker-controlled Vault address. This issue is fixed in version 1.23.1.

CVE-2026-59232 5.3 Moyenne 01:10

Roskus Prospero Flow CRM

Cross-site Scripting in the lead index view in Roskus Prospero Flow CRM before 5.3.7 allows authenticated users holding the create or update lead permission to execute arbitrary JavaScript in the application origin via HTML markup stored in the lead name field, which the view renders through Blade's unescaped output directive and inside a JavaScript string literal in an onclick attribute.

CVE-2026-59231 5.3 Moyenne 01:10

ccyl13 Pentestify

Server-Side Request Forgery in the PDF export component in maalfer Pentestify before 1.1.0 allows authenticated users to cause outbound HTTP GET requests from the server to arbitrary attacker-chosen destinations via unvalidated URLs stored in the finding images field or the report client_logo field, which the server-side headless browser fetches while rendering the report.

CVE-2026-56568 5.3 Moyenne 01:10

HCL Software HCL iControl · Hcltech icontrol

HCL iControl was affected by Information Exposure Through Verbose Client-Side API Error Messages vulnerabilities. It involves application displays raw server/API error messages to users instead of generic error messages and exposes internal endpoint names, request parameters, error codes, and authentication status

CVE-2026-17348 6.5 Moyenne 01:10

pgadmin.org pgAdmin 4 · Pgadmin pgadmin 4

In SERVER mode, pgAdmin 4 enforces authentication per route via the @pga_login_required decorator; the application's before_request hook only handles desktop-mode auto-login and the Kerberos/Webserver-auth redirect, so any route shipped without the decorator is reachable without authentication (CWE-306). This is the same defect class previously fixed as CVE-2026-12046 (the sqleditor close/update_connection routes). A follow-up sweep, prompted by a report describing an incomplete fix for CVE-2026-12046, found further routes missing @pga_login_required: the Constraints blueprint's nodes and proplist (object listing) routes and its delete route (a state-mutating DELETE that removes table constraints); preferences.get_all_cli (GET, discloses all CLI-settable preference values); debugger.close (DELETE); and schema_diff.close (DELETE). An unauthenticated network client could therefore enumerate constraint metadata, delete table constraints, read preference values, and force-close debugger or schema-diff sessions belonging to other users, without ever authenticating. Fix adds the missing @pga_login_required decorator (and the corresponding import to the Constraints module) to each of these routes. The change is decorator-only; no behavioral changes to the underlying handlers. This issue affects pgAdmin 4 in SERVER mode: the Constraints and Debugger routes from 1.0, the Schema Diff close route from 4.18, and preferences.get_all_cli from 8.2, all before 9.17.

CVE-2026-16504 9.8 Critique 01:10

VPS.org Zulip template

Deployment of the VPS.org one-click Zulip template deploys a hardcoded application signing key, a default database password ("zulip"), and DISABLE_HTTPS=True.

CVE-2026-16503 9.1 Critique 01:10

VPS.org Supabase template

Deployment of the VPS.org one-click Supabase template deploys a PostgreSQL instance that is published on all interfaces (0.0.0.0:5432) with a default database password set to "postgres". Because Docker installs its own iptables rules, this exposure bypasses a standard host UFW configuration.

CVE-2026-10685 7.6 Élevée 01:10

zephyrproject zephyr

The Zephyr Bluetooth GATT client CCC-write response handler gatt_write_ccc_rsp() in subsys/bluetooth/host/gatt.c invoked the application's params->subscribe() callback after it had already called params->notify(conn, params, NULL, 0). Per the public GATT API, a notify callback with NULL data is the documented signal that the subscription has terminated and the bt_gatt_subscribe_params struct may be freed or reused by the application; calling subscribe() on the struct afterwards is a use-after-free, including an indirect call through the freed params->subscribe function pointer. The error branch is remotely (adjacent) reachable: a Zephyr device acting as a GATT client that calls bt_gatt_subscribe() can be driven into this ordering when a connected GATT server peer answers the CCC write with an ATT Error Response (the peer-supplied error code flows through att_error_rsp -> att_handle_rsp into gatt_write_ccc_rsp). For applications that free or recycle subscription parameters in their notification-termination handler, this results in memory corruption, a crash (denial of service), or potentially attacker-influenced control flow. The fix reorders the handler so the subscribe() callback runs before the terminating notify(NULL) in both the error and unsubscribe paths.

CVE-2026-64607 5.3 Moyenne 01:10

Apache Software Foundation Apache HttpComponents Client · Apache httpclient

HttpClient based on the classic i/o model fails to correctly release the underlying connection back to the connection manager if it encounters an invalid or unsupported `Content-Encoding` header value in the response message. Please note this defect does not affect HttpClient based on the async i/o model. This issue affects Apache HttpComponents Client: from 5.0-alpha1 through 5.6.2.

CVE-2026-62391 8.1 Élevée 01:10

Apache Software Foundation Apache Kyuubi · Apache kyuubi

The security fix for CVE-2025-66518 is incomplete. Any client who can access to Apache Kyuubi Server via Kyuubi frontend protocols can bypass server-side config kyuubi.session.local.dir.allowlist via unprefixed Spark config aliases. This issue affects Apache Kyuubi: from 1.6.0 before 1.12.0. Users are recommended to upgrade to version 1.12.0, which fixes the issue.

CVE-2026-14541 7.5 Élevée 01:10

Google mcp-toolbox · Google mcp toolbox for databases

An authentication bypass and audience confusion vulnerability exists in the Google OAuth provider component of Google mcp-toolbox version 1.4.0. When a Google authService is initialized with mcpEnabled: true but lacks an explicitly defined audience or clientId, the ValidateMCPAuth pipeline for opaque tokens skips audience validation entirely. As a result, the toolbox will accept any valid Google OAuth access token—even those minted for unrelated ecosystem applications—granting unauthorized clients access to protected tools and data backends.

CVE-2026-14540 6.1 Moyenne 01:10

Google mcp-toolbox · Google mcp toolbox for databases

A Server-Side Request Forgery (SSRF) vulnerability exists in the generic HTTP source and tool components of Google mcp-toolbox versions 0.3.0 through 1.4.0. While the toolbox implements baseline input sanitization for user-controlled parameters, the underlying HTTP client (internal/sources/http/http.go) fails to safely regulate request redirection boundaries. Specifically, the client is initialized without a restrictive CheckRedirect policy hook and lacks target IP validation. An attacker or a malicious data-driven prompt can supply a crafted path parameter that triggers an open redirect or a direct destination swap on the target backend, coercing the mcp-toolbox into blindly following the redirection and making unauthorized requests to internal or arbitrary external endpoints.

CVE-2026-17766 3.3 Faible 01:10

Google Chrome

Insufficient validation of untrusted input in Clipboard in Google Chrome on Android prior to 151.0.7922.72 allowed a local attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium)

CVE-2026-67191 9.8 Critique 01:10

Xlight FTP Server

Xlight FTP Server before 3.9.5 contains a pre-authentication heap buffer overflow vulnerability that allows remote unauthenticated attackers to write past the end of a heap buffer by sending a malformed SSH client identification string. A logic error in the recv loop's termination condition uses an incorrect OR operator where an AND operator is required, enabling exploitation on any SSH or SFTP connection before authentication occurs.

CVE-2026-59247 7.6 Élevée 01:10

gleam-lang gleam

Insufficient Verification of Data Authenticity vulnerability in Gleam allows an adversary in the middle to substitute forged Hex package contents during dependency resolution. During dependency resolution Gleam fetches package metadata from the signature-verified Hex repository, which covers each release's dependency requirements and SHA-256 outer_checksum. After resolving versions, gleam_cli::dependencies::lookup_package makes a second request to the unsigned Hex API through gleam_core::hex::get_package_release and records the outer_checksum and dependency names from that JSON response into manifest.toml, instead of the values from the verified repository metadata. The Hex repository signature does not cover the API response. An adversary in the middle who can intercept TLS with a certificate trusted by the Gleam process (for example a TLS-inspecting proxy using a CA in the operating system trust store or added through GLEAM_CACERTS_PATH), and who can modify both the API release response and the corresponding repository tarball, can supply a package archive with a matching forged checksum without the Hex repository signing key. Gleam verifies the forged tarball against the forged checksum, accepts it, and extracts it as a dependency source, resulting in loss of integrity of the downloaded package contents. Only projects that resolve or update Hex dependencies are affected, which happens when the manifest is missing, a dependency is added or updated, or dependency requirements change. Builds that reuse an unchanged, known-good manifest.toml continue to verify tarballs against its pinned checksum. This issue affects gleam: from 0.18.0 before 1.18.0.

CVE-2026-54666 8.3 Élevée 01:10

acacode swagger-typescript-api

swagger-typescript-api generates API clients for Fetch or Axios from an OpenAPI Specification. Prior to 13.12.2, src/schema-routes/schema-routes.ts passes OpenAPI path keys through parseRouteName to templates/default/procedure-call.ejs and templates/modular/procedure-call.ejs without escaping JavaScript template literal interpolation, allowing an attacker-controlled path containing ${...} to execute when the generated method is called. This issue is fixed in version 13.12.2.

CVE-2026-54664 8.3 Élevée 01:10

acacode swagger-typescript-api

swagger-typescript-api generates API clients for Fetch or Axios from an OpenAPI Specification. Prior to 13.12.2, src/schema-parser/base-schema-parsers/enum.ts passes components.schemas.*.enum[i] values to Ts.StringValue in src/configuration.ts without escaping before templates/base/enum-data-contract.ejs renders TypeScript enum declarations, allowing an attacker-controlled OpenAPI spec to inject code that executes when the generated module is imported. This issue is fixed in version 13.12.2.

CVE-2026-54663 6.1 Moyenne 01:10

acacode swagger-typescript-api

swagger-typescript-api generates API clients for Fetch or Axios from OpenAPI specifications. Prior to 13.12.2, src/resolved-swagger-schema.ts warmUpRemoteSchemasCache resolves external $ref URLs and fetchRemoteSchemaDocument uses isHttpUrl to fetch any http or https target without private IP, redirect, DNS rebinding, or same-origin validation, allowing an attacker-controlled OpenAPI spec to make the generator issue requests to internal or link-local services. This issue is fixed in version 13.12.2.

CVE-2026-54662 8.3 Élevée 01:10

acacode swagger-typescript-api

swagger-typescript-api generates API clients for Fetch or Axios from OpenAPI specifications. Prior to 13.12.2, src/code-gen-process.ts createApiConfig copies servers[0].url into apiConfig.baseUrl, and templates/base/http-clients/fetch-http-client.ejs interpolates apiConfig.baseUrl into the generated HttpClient baseUrl field without escaping, allowing an attacker-controlled OpenAPI spec to inject TypeScript static field code that executes when the generated fetch client module is imported. This issue is fixed in version 13.12.2.

CVE-2026-54661 8.3 Élevée 01:10

acacode swagger-typescript-api

swagger-typescript-api generates API clients for Fetch or Axios from an OpenAPI Specification. Prior to 13.12.2, templates/base/http-clients/axios-http-client.ejs interpolates servers[0].url from src/code-gen-process.ts into the HttpClient constructor without escaping, allowing an attacker-controlled OpenAPI spec to inject code that executes when new HttpClient() or new Api() is constructed. This issue is fixed in version 13.12.2.

CVE-2026-54660 7.4 Élevée 01:10

acacode swagger-typescript-api

swagger-typescript-api generates API clients for Fetch or Axios from OpenAPI specifications. Prior to 13.12.2, src/resolved-swagger-schema.ts getRemoteRequestHeaders forwards --authorizationToken to every URL fetched by fetchRemoteSchemaDocument while warmUpRemoteSchemasCache resolves external $ref URLs, allowing an attacker-controlled OpenAPI spec to exfiltrate the developer or CI bearer token to a cross-origin endpoint. This issue is fixed in version 13.12.2.

CVE-2026-50642 4.8 Moyenne 01:10

so-fancy diff-so-fancy

diff‑so‑fancy does not properly sanitize non‑SGR terminal control sequences before outputting diff data. The application only strips ANSI SGR sequences while allowing other control characters, including carriage return (\r) and escape sequences (e.g., OSC, CSI), to pass through unsanitized. An attacker can embed malicious control sequences in filenames, diff metadata, or file content that are rendered directly in the terminal during diff viewing. This can lead to output manipulation, including filename spoofing, terminal screen clearing, and clipboard injection via supported escape sequences. Successful exploitation may mislead users during code review, alter terminal state, or result in unintended command execution through clipboard hijacking. This issue has been fixed in the commit 9c81294

CVE-2026-58153 8.3 Élevée 01:10

Apache Software Foundation Apache Traffic Server · Apache traffic server

Apache Traffic Server forwards HTTP/2 origin trailers to HTTP/1 clients without proper chunked framing when converting HTTP/2 to HTTP/1. This issue affects Apache Traffic Server: from 10.0.0 through 10.1.3. Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue.

CVE-2026-63237 4.8 Moyenne 01:10

Three Learning Koollab LMS

A TOTP two-factor authentication bypass vulnerability in Koollab LMS allowed an attacker to supply a client-controlled seed to generate a matching one-time password and bypass the second authentication factor, potentially enabling unauthorised access to administrator accounts.

CVE-2026-64863 9.1 Critique 01:10

goshs-labs goshs

goshs is a feature-rich single-binary file server for red teamers and developers. Prior to 2.1.4, the httpserver/server.go wdGuard handled WebDAV MOVE as a write-only method and did not enforce --no-delete, allowing WebDAV clients to delete or overwrite files via MOVE with Overwrite: T. This issue is fixed in version 2.1.4.

CVE-2026-54638 7.5 Élevée 01:10

gotd td

gotd/td is a T Telegram MTProto API client in Go. Prior to 0.145.1, proto.UnencryptedMessage.Decode in proto/unencrypted_message.go read attacker controlled dataLen from an unauthenticated MTProto unencrypted packet and allocated make([]byte, dataLen) before checking the remaining buffer, allowing remote unauthenticated denial of service through excessive memory allocation and CPU or garbage collection pressure. This issue is fixed in version 0.145.1.

CVE-2026-16107 5.9 Moyenne 01:10

IBM TS4500 CLI tool

IBM TS4500 CLI tool Versions: 0.1.31 through 1.12.0.0 does not validate or improperly validates TLS certificate validation, which could allow an attacker to obtain sensitive information using man in the middle techniques.

CVE-2026-16771 8.8 Élevée 01:10

AT&T Arris BGW210‑700

In firmware versions 2.7.7 and earlier, the Arris BGW210‑700 gateway fails to enforce any server‑side authentication on its /cgi-bin/*.ha management endpoints, relying solely on client‑side CSS/JavaScript gating that can be bypassed by any HTTP client. This allows unauthenticated attackers on the LAN to read sensitive configuration data, modify persistent device settings, or trigger backend diagnostic operations. The issue appears systemic across the CGI handler chain.

CVE-2026-14869 8.6 Élevée 01:10

HashiCorp Tooling

The terraform-mcp-server before version 1.1.0 is vulnerable to a server-side request forgery issue in the streamable-HTTP transport that may allow an unauthenticated remote client to redirect the server's Terraform API requests, and the server-side authorization token, to an attacker-controlled endpoint. This vulnerability, CVE-2026-14869, is fixed in terraform-mcp-server 1.1.0.

CVE-2026-67182 7.5 Élevée 01:10

tomaka rouille

Rouille 0.3.3 through 3.6.2 contains an HTTP request smuggling vulnerability that allows remote attackers to bypass access controls by injecting bare line feed characters (0x0A) into client-supplied request header values that are copied verbatim to upstream connections without validation. Attackers can craft a header value containing a complete additional HTTP request that is interpreted as a separate request by backends such as Go net/http and Python http.server, causing the backend to process a smuggled request with attacker-chosen method, path, and headers that bypasses the rouille handler's access control logic.

CVE-2026-54609 8.6 Élevée 01:10

Quiet-Terminal-Interactive QTINeon

QTI Neon is a minimal, game-agnostic, relay-based UDP multiplayer protocol library. In version 1.0.0, the relay's handleReconnectRequest forwards RECONNECT_REQUEST packets to the host without bounding them, so an unauthenticated client can drive relay-to-host amplification and cause a denial of service on the host. No fixed version is available as of this review.

CVE-2026-54605 7.2 Élevée 01:10

ruby-oauth oauth

OAuth is a Ruby wrapper for the OAuth 1.0 and 1.0a protocols, providing clients and servers. From 0.5.5 to 1.1.5, OAuth::Consumer#token_request parses the raw Location header of a 300 to 399 redirect returned by the OAuth server and follows the redirect recursively, which can mutate the consumer's configuration and expose signed OAuth request metadata, including the Authorization header, to a cross-origin host. This issue is fixed in version 1.1.6.

CVE-2026-54603 8.6 Élevée 01:10

ruby-oauth oauth2

OAuth2 is a Ruby wrapper for the OAuth 2.0 and 2.1 authorization frameworks, including OpenID Connect (OIDC). From 0.4.0 to 2.0.21, a protocol-relative redirect Location returned to OAuth2::Client#request overrides the request authority, so the bearer Authorization header is sent to an attacker-controlled host, leaking the credential. This issue is fixed in version 2.0.22.

CVE-2026-44016 8.2 Élevée 01:10

docling-project docling · Red Hat OpenShift AI (RHOAI) · Docling docling

Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. FIn versions >= 2.82.0, < 2.91.0, if the HTML backend was explicitly configured for rendering (rendering option by default deactivated), then the Playwright-based rendering feature could allow JavaScript execution and unrestricted network access when processing untrusted HTML documents. An attacker could craft malicious HTML that executes arbitrary JavaScript in the rendering context or makes unauthorized network requests to internal services, potentially leading to SSRF attacks, data exfiltration, or remote code execution in the rendering environment. This vulnerability is fixed in 2.91.0.

CVE-2026-32995 7.5 Élevée 01:10

Rocket.Chat

The Rocket.Chat DDP method autoTranslate.translateMessage in versions <8.5.0, <8.4.2, <8.3.4, <8.2.4, <8.1.5, <8.0.5, <7.13.8, and <7.10.12 accepts a client-supplied IMessage object and passes it directly to translateMessage() without checking Meteor.userId() or verifying room membership. Any authenticated DDP user can read the content of any message by ID from any room (private channels, DMs, E2EE rooms) by calling this method.

CVE-2026-35167 8.1 Élevée 01:10

kedro-org kedro · Linuxfoundation kedro

Kedro is a toolbox for production-ready data science. Prior to 1.3.0, the _get_versioned_path() method in kedro/io/core.py constructs filesystem paths by directly interpolating user-supplied version strings without sanitization. Because version strings are used as path components, traversal sequences such as ../ are preserved and can escape the intended versioned dataset directory. This is reachable through multiple entry points: catalog.load(..., version=...), DataCatalog.from_config(..., load_versions=...), and the CLI via kedro run --load-versions=dataset:../../../secrets. An attacker who can influence the version string can force Kedro to load files from outside the intended version directory, enabling unauthorized file reads, data poisoning, or cross-tenant data access in shared environments. This vulnerability is fixed in 1.3.0.

CVE-2026-34841 9.8 Critique 01:10

usebruno bruno

Bruno is an open source IDE for exploring and testing APIs. Prior to 3.2.1, Bruno was affected by a supply chain attack involving compromised versions of the axios npm package, which introduced a hidden dependency deploying a cross-platform Remote Access Trojan (RAT). Users of @usebruno/cli who ran npm install between 00:21 UTC and ~03:30 UTC on March 31, 2026 may have been impacted. Upgrade to 3.2.1

CVE-2025-40830 6.7 Moyenne 01:10

Siemens SINEC Security Monitor

A vulnerability has been identified in SINEC Security Monitor (All versions < V4.10.0). The affected application does not have proper authorization checks for the file_transfer feature in ssmctl-client command. This could allow an authenticated, lowly privileged local attacker to read or write to any file on server or sensor.

CVE-2022-31810 7.5 Élevée 01:10

Siemens SiPass integrated

A vulnerability has been identified in SiPass integrated (All versions < V2.90.3.8). Affected server applications improperly check the size of data packets received for the configuration client login, causing a stack-based buffer overflow. This could allow an unauthenticated remote attacker to crash the server application, creating a denial of service condition.

CVE-2023-29054 7.4 Élevée 01:10

Siemens SCALANCE X200-4P IRT · Siemens SCALANCE X201-3P IRT · Siemens SCALANCE X201-3P IRT PRO · Siemens SCALANCE X202-2IRT

A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SIPLUS NET SCALANCE X202-2P IRT (All versions < V5.5.2). The SSH server on affected devices is configured to offer weak ciphers by default. This could allow an unauthorized attacker in a man-in-the-middle position to read and modify any data passed over the connection between legitimate clients and the affected device.

CVE-2023-27462 4.3 Moyenne 01:10

Siemens RUGGEDCOM CROSSBOW

A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V5.3). The client query handler of the affected application fails to check for proper permissions for specific read queries. This could allow authenticated remote attackers to access data they are not authorized for.

CVE-2023-27310 8.8 Élevée 01:10

Siemens RUGGEDCOM CROSSBOW

A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V5.2). The client query handler of the affected application fails to check for proper permissions when assigning groups to user accounts. This could allow an authenticated remote attacker to assign administrative groups to otherwise non-privileged user accounts.

CVE-2026-115885 4.1 Moyenne 00:16

langchain-ai langgraph

The LangGraph CLI is the official command-line interface for LangGraph. From 0.4.15 until 0.4.32, langgraph deploy --verbose passes a temporary registry push token on standard input to docker login --password-stdin, but the CLI subprocess helper prints command input in verbose mode. Anyone who can read resulting CI logs or terminal recordings before the token's maximum 12-hour expiration can pull deployment images or push images to that deployment's image repository. Deployments without --verbose and remote image builds are not affected, and the token alone cannot update a deployment to execute a pushed image. This issue is fixed in version 0.4.32.

CVE-2026-115247 4.3 Moyenne 00:16

subhajitkhan online-clinic-management-system

A security vulnerability has been detected in subhajitkhan online-clinic-management-system up to e9ee77a8827a1446220fa07ee693dc4d9a29a578. This vulnerability affects unknown code of the file patientregistration.php. The manipulation of the argument pat_pswd/doc_pswd leads to missing encryption of sensitive data. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.

CVE-2026-112381 5.9 Moyenne 00:16

Apache Software Foundation Apache Traffic Server

Apache Traffic Server can crash with a null pointer dereference when a client POST request is torn down via half-close while a chunked origin response is being reparsed from a reentrant write-ready callback, a timing-dependent race introduced by the CVE-2021-32564 flow-control backports. This issue affects Apache Traffic Server: 9.2.15, 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.

CVE-2026-105945 7.7 Élevée 00:16

Apache Software Foundation Apache Pulsar

The Pulsar Packages Management Service can be configured to store packages on the local filesystem of the broker by using the filesystem storage provider. Package names consist of a type, tenant, namespace, name and version. Authorization of package operations is based only on the tenant and namespace, while the storage location of a package is derived from all of these components. The version component of a package name was not validated, so it could contain URL-encoded path separators and parent directory references. The filesystem storage provider resolved such a version to a location belonging to a package in a different tenant or namespace. Because that location is inside the configured storage directory, the containment check that the filesystem storage provider performs in recent releases did not prevent the access. An authenticated user who has the packages permission on any namespace could use this to download, overwrite or delete packages stored in other tenants or namespaces for which the user has no permission. Packages overwritten or deleted in this way may be used by Pulsar Functions, Sources or Sinks, so the issue can affect the integrity and availability of these components. If authentication is disabled, the operations are available to any client that can reach the broker's admin REST API. This issue only affects deployments in which package management is enabled with the broker setting enablePackagesManagement and the filesystem storage provider (FileSystemPackagesStorageProvider) is configured with the setting packagesManagementStorageProvider. Package management is disabled by default, and the default storage provider, which stores packages in Apache BookKeeper, is not affected. This issue affects Apache Pulsar versions from 2.10.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

CVE-2026-105942 7.7 Élevée 00:16

Apache Software Foundation Apache Pulsar

When a configured proxy role sends a request to the broker on behalf of another user (the original principal), the broker is designed to authorize both the proxy role and the original principal and to allow the request only if both are authorized, so that the original principal cannot exceed its own permissions. Two flaws weakened this check. First, the original principal was authorized with the proxy's authentication data instead of its own. On the admin REST API of the broker and the functions worker, this applied to every proxied request. On the Pulsar binary protocol, it applied when the proxy did not forward the client's credentials to the broker, which was the default of the Pulsar proxy in the affected versions. Authorization providers that resolve permissions from the role name only, such as the default authorization provider, are not affected by this flaw. The multi-role token authorization provider (MultiRolesTokenAuthorizationProvider), added in Apache Pulsar 2.8.1, resolves roles from the role claim of the token in the authentication data it is given. When a proxy authenticates to the broker with its own token, the original principal was therefore authorized with all roles in the proxy's token. If any of those roles is a superuser or tenant admin role, any user whose requests are forwarded by that proxy can perform operations that need those permissions without holding them. Custom authorization providers that use the authentication data could be affected in a similar way. Second, independently of the authorization provider, the tenant admin check of a proxied admin REST API request succeeded without checking the original principal when the proxy role was itself an admin role of the tenant. In deployments where a proxy role is a tenant admin, including with the default authorization provider, any user whose requests are forwarded by that proxy could perform tenant administration operations on that tenant. This behavior is present from 2.8.4 in the 2.8.x releases, from 2.9.3 in the 2.9.x releases, and from 2.10.1 onwards. Deployments that use neither the multi-role token authorization provider nor a custom provider that uses the authentication data are not affected by the first flaw, and with the multi-role token authorization provider, neither are deployments whose proxies do not authenticate to the broker with a token. Deployments in which no proxy role is listed as an admin role of a tenant are not affected by the second flaw. A proxy role that is a superuser but is not listed as a tenant admin does not trigger it, because the tenant admin check of the built-in authorization providers only considers the tenant's admin roles; this can differ for custom authorization providers that treat superusers as tenant admins. In fixed versions, both the proxy role and the original principal are authorized for each proxied request, and the original principal is authorized only with its own authentication data. With the multi-role token authorization provider, the roles of a forwarded token are used for the original principal only when that token authenticates as the original principal; otherwise only the original principal's role name is used. For tenant admin checks, the proxy role and the original principal must each be a superuser or a tenant admin of the tenant. This issue affects Apache Pulsar versions from 2.8.1 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

CVE-2026-105938 2.3 Faible 00:16

Apache Software Foundation Apache Pulsar

Apache Pulsar namespaces can restrict which roles may use a subscription, either with the Prefix subscription authentication mode, which requires a subscription name to start with the role name, or by granting permission on a subscription to specific roles. Topic-level subscription operations, such as consuming, skipping messages, resetting a cursor or deleting a subscription, apply these subscription policies. Several admin REST API operations that act on subscriptions did not apply them: - the namespace-level and bundle-level clear backlog operations, both for a named subscription and for all subscriptions; - the namespace-level and bundle-level unsubscribe operations; - the topic-level operation that expires messages for all subscriptions of a topic. With the default authorization provider, the namespace-level operations require only consume permission granted on the namespace, and the expire-all operation requires only consume permission on the topic. As a result, when authentication and authorization are enabled and a namespace uses the Prefix subscription authentication mode or subscription permissions, an authenticated user with such consume permission can clear the backlog of, expire messages of, or delete a subscription that the policies would deny to that user. Tenant admin or superuser access is not required. The clear backlog operations can also be applied to the cursors used for geo-replication, so that messages not yet replicated to a remote cluster are skipped. Deployments that do not configure the Prefix subscription authentication mode or subscription permissions (the defaults) are not affected by this bypass, because consume permission on the namespace or topic already allows these operations there. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be different. The impact is on the integrity of subscription state. Clearing or expiring the backlog moves the subscription's cursor forward, so unacknowledged messages are no longer delivered to the subscription's consumers. The unsubscribe operation deletes a subscription that has no connected consumers. Skipped messages can be permanently deleted once no other subscription or the namespace's retention policy keeps them. The issue does not allow reading message contents, changing permissions or policies, or accessing other namespaces, and it does not affect the availability of the broker. In fixed versions, the namespace-level and bundle-level operations for a named subscription apply the subscription policies to that subscription, and the operations for all subscriptions, when requested by a user who is not a tenant admin or superuser, only act on the subscriptions that the user may access. Clearing the backlog of geo-replication cursors requires tenant admin or superuser access. Topic-level subscription operations apply the subscription policies for all types of authentication data, including that of the anonymous user role. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. All brokers in a cluster must be upgraded before relying on the namespace-level restrictions, because brokers that have not been upgraded do not apply them when they receive the internal per-bundle requests. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately can reduce exposure by restricting network access to the broker's admin REST API to trusted administrative clients.

CVE-2026-105937 8.7 Élevée 00:16

Apache Software Foundation Apache Pulsar

Apache Pulsar shadow topics (PIP-180) are topics that read the stored messages of a source topic from that topic's managed ledger. The source topic is selected by setting the reserved topic property PULSAR.SHADOW_SOURCE. The admin REST API accepts this property when creating a non-partitioned or partitioned topic and when updating the properties of an existing topic. On these paths the broker authorizes the caller only against the topic being created or updated. It does not authorize the caller against the source topic named in the property. The existing authorization for shadow topic configuration (the SHADOW_TOPIC topic policy on the source topic) is applied only to the source-side shadow topics admin API, not to these paths. As a result, an authenticated user who is allowed to create topics or update topic properties in one tenant can bind a topic in that tenant to a persistent topic in any other tenant. With the default authorization provider, these operations require the tenant admin role for the user's own tenant. The user does not need any permission on the source topic, its namespace or its tenant. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be different. The user can then consume from the shadow topic, using only permissions on their own topic, and receive retained messages that were published to the source topic in the other tenant. Exposure is limited to messages that are still retained and readable in the source topic's ledgers; messages protected with client-side end-to-end encryption cannot be decrypted without the encryption keys. A producer on the shadow topic can also register a new schema version under the source topic's schema, subject to the schema compatibility settings; existing schema versions are not replaced. In addition, the shadow topic's managed ledger applies its own retention, trimming, offloading and deletion to the source topic's ledgers. This can permanently delete the source topic's ledger data from BookKeeper and from tiered storage, regardless of the source topic's own subscriptions and retention policy, including messages that have not yet been acknowledged. Deleting the shadow topic can also delete the source topic's ledgers. This data loss can also affect shadow topics that were configured intentionally by administrators. This issue affects Apache Pulsar versions from 3.0.0 before 4.0.14 and from 4.1.0 before 4.2.5. Apache Pulsar 2.x releases do not contain the shadow topic implementation. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. In the fixed versions, shadow topics are disabled by default and are controlled by the new broker configuration setting enableShadowTopics (default false). While it is disabled, the broker rejects creating shadow topics, setting the PULSAR.SHADOW_SOURCE property, and loading or replicating to existing shadow topics. Deployments that use shadow topics must set enableShadowTopics=true in the broker configuration of all brokers after upgrading; otherwise existing shadow topics will not be loaded. When shadow topics are enabled, binding a shadow topic to a source topic in a different tenant requires the superuser role. The fixed versions also prevent a shadow topic from deleting or trimming the ledgers and offloaded data of its source topic. Affected versions provide no configuration option to disable shadow topics. Users who cannot upgrade immediately can reduce exposure by granting the tenant admin role only to trusted principals.

CVE-2026-105936 5.3 Moyenne 00:16

Apache Software Foundation Apache Pulsar

The Pulsar Functions worker REST API provides two endpoints that return the catalog of Pulsar IO connectors installed on the functions worker: the worker connectors endpoint (/admin/v2/worker/connectors) and the deprecated functions connectors endpoint (/admin/v2/functions/connectors and /admin/v3/functions/connectors). When authorization is enabled, the worker connectors endpoint requires super-user access. The functions connectors endpoint, served both by the functions worker and by a broker running the functions worker, returns the same catalog without this check. As a result, when authentication and authorization are enabled, any authenticated client can read the connector catalog through the functions connectors endpoint, regardless of the permissions granted to its role and without super-user access. Unauthenticated requests are rejected unless anonymous access is configured with an anonymous user role. The catalog contains the connector type definitions installed in the functions worker's connectors directory: the connector name, its description, and the source, sink and configuration class names. It does not contain configured source or sink instances, their configuration values or credentials, and an installed connector type does not indicate that a connector is configured or running. The impact is limited to disclosure of this metadata, which can include the names and descriptions of custom connectors installed by the operator. The issue does not allow modifying the catalog or managing connectors. Connector definitions that have a source or sink class are also returned by the built-in sources and sinks endpoints to authenticated clients. In fixed versions, the functions connectors endpoint applies the same checks as the worker connectors endpoint, so that it requires super-user access when authorization is enabled. Clients that are not super-users can use the built-in sources and sinks endpoints to list the available connector types. This issue affects Apache Pulsar versions from 2.4.1 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

CVE-2026-105935 4.9 Moyenne 00:16

Apache Software Foundation Apache Pulsar

The Pulsar Functions Worker provides a REST API endpoint for triggering a function, which publishes a caller-supplied value to one of the function's configured input topics. The Functions Worker performs this publish with its own broker client, which authenticates with the Worker's configured broker-client credentials rather than the credentials of the API caller. When authorization is enabled, in Apache Pulsar 2.4.0 and later versions, the trigger endpoint checks only that the caller is authorized to perform function operations in the function's namespace. It does not check that the caller is authorized to produce to the input topic that the message is published to. Versions before 2.4.0 do not perform a caller authorization check for the trigger endpoint at all. Function input topics are not restricted to the function's own tenant or namespace, and registering a function does not require produce permission on its input topics. As a result, an authenticated user who is authorized to manage functions in a namespace, for example a role granted the functions permission on that namespace, can cause the Functions Worker to publish messages with caller-controlled content to a topic that the user is not authorized to produce to, including topics in other tenants. These messages are published under the identity of the Functions Worker. The issue does not require any function instance to be running or any function code to be executed. It requires that the Functions Worker's broker-client identity is itself authorized to produce to the target topic and, in Apache Pulsar 2.3.0 and later versions, to list the subscriptions of the target topic, as is the case when that identity is a superuser. The impact is on the integrity of the data in the affected topics: consumers of those topics may receive messages from a user who is not permitted to publish them. This concerns the Functions Worker REST API as called by an external, authenticated client; it does not change the security model for function code, which must be fully trusted. In fixed versions, when authorization is enabled, triggering a function additionally requires the caller to be authorized to produce to the selected input topic before any message is published. This issue affects Apache Pulsar versions from 2.0.0-rc1-incubating before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users of Apache Pulsar 2.4.0 and later versions with authorization enabled who cannot upgrade immediately can limit the permission to manage functions to trusted roles. Users of versions before 2.4.0 should restrict access to the Functions Worker REST API to trusted callers, because in these versions the trigger endpoint does not check the caller's permission to manage functions.

CVE-2026-105934 7.2 Élevée 00:16

Apache Software Foundation Apache Pulsar

The Apache Pulsar broker admin REST API provides a truncate operation for persistent topics (DELETE /admin/v2/persistent/{tenant}/{namespace}/{topic}/truncate). Truncating a topic moves all subscription cursors of the topic to the end of the topic and deletes the topic's inactive ledgers. Truncating a non-partitioned topic, or a single partition addressed by its partition name, correctly requires the tenant admin role or the superuser role. When the operation is requested for the name of a partitioned topic, the broker does not apply this tenant admin check to the caller. Instead, it truncates each partition using the broker's own internal admin client, which authenticates with the broker's configured client credentials rather than the caller's identity. Each per-partition truncate request is still checked for the tenant admin role or the superuser role, but against the broker's internal identity instead of the caller. The partitions are therefore truncated only when the broker's configured client role is a superuser or an admin of the target tenant, which is the usual configuration when authorization is enabled. As a result, when that condition holds, an authenticated user who is not a tenant admin can truncate any partitioned topic on which the user has lookup permission. Caller authentication and lookup permission alone are not sufficient: if the broker's internal identity lacks tenant admin or superuser authorization for the target tenant, the per-partition requests are rejected. With the default authorization provider, lookup permission is granted by produce or consume permission on the topic or its namespace. A user with no permissions on the topic cannot trigger the issue. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be different. Truncating a partitioned topic this way moves the cursors of all subscriptions on every partition to the end of the topic, so any unacknowledged backlog is skipped and is no longer delivered to consumers. It also deletes eligible older ledgers of each partition regardless of the namespace's configured retention policy, so messages stored in those ledgers can be permanently lost. The ledger currently being written is not deleted by the truncate operation. The issue does not allow reading message contents or changing permissions or configuration, and it does not give access to topics on which the user has no lookup permission. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately can reduce exposure by restricting network access to the broker's admin REST API (/admin/v2) to trusted administrative clients.

CVE-2026-77995 10.0 Critique 00:10

miniorange.com miniOrange OAuth Client (free) extension for Joomla · miniorange.com OAuth Single Sign-On – OIDC SSO | Login with Azure AD (free) extension for Joomla · miniorange.com Login with Keycloak OAuth Single Sign-On (SSO) (free) extension for Joomla · miniorange.com Single Sign-On for Educational Institutes (free) extension for Joomla

Joomla Extension - miniorange.com - Arbitrary account takeover in miniOrange OAuth Client < 3.2.0, OAuth Single Sign-On – OIDC SSO < 1.2.2, Login with Keycloak OAuth Single Sign-On (SSO) < 1.2.2, Single Sign-On for Educational Institutes < 1.2.2 - The manipulation of a cookie value allows actors to login as arbitrary accounts, including admins.

CVE-2026-67363 7.7 Élevée 00:10

balbooa.com Balbooa Forms extension for Joomla

Joomla Extension - balbooa.com - Pre-auth Payment Amount Tampering in Balbooa Forms < 2.4.3.2 - The stripeCharges and payAuthorize endpoints accept the charge total from a client-controlled request parameter and forward it to the payment gateway without recomputing it from the form's configured product prices. Neither endpoint enforces authentication or CSRF checks. An unauthenticated attacker can purchase any priced item for an arbitrary amount (e.g., $0.01), and can additionally forge line items, quantities, and shipping.

CVE-2026-47754 9.3 Critique 00:10

NCEAS metacat

Metacat is data repository software that helps researchers preserve, share, and discover data. Versions 2.x through 2.19.1 and all 1.x versions contain an unauthenticated path traversal in the `archiveEntryName` parameter of the `action=read` endpoint that is part of the original 1.x Metacat API. `ArchiveHandler.readArchiveEntry()` concatenates the user-supplied parameter into a filesystem path without validation, and the surrounding `hasReadPermission()` check is commented out. An unauthenticated remote attacker can read any file accessible to the Tomcat process by sending a single GET request. Proof-of-concept exploits have been demonstrated and verified against this vulnerability, and it should be considered easily exploitable for any Metacat deployment < 3.0.0 by any user with access to the 1.x API. Through this vulnerability, production 2.x deployments are exposed to credential theft, client certificate and private key exfiltration enabling member node impersonation within the federation, embargoed research data disclosure, and broad system reconnaissance. Given Metacat's deployment footprint across the DataONE network of repositories and federally funded research programs, the population of exposed 2.x instances is non-trivial. The vulnerability was eliminated in Metacat version 3.0.0 and after by eliminating the entire Metacat 1.x API that exposed this vulnerability. The vulnerability was remediated in April 2024 with the release of Metacat 3.0.0, which removed the legacy Metacat API including ArchiveHandler.java. The commit message and issue reference architectural cleanup, not a security fix, and no advisory or CVE was issued. The 2.x branch was not and will not be backported, as is standard practice in Metacat, which only supports the most current release. 2.19.1 remains vulnerable with identical code and is beyond its supported lifetime. As a workaround, disable or restrict 1.x API servlets. Because the vulnerable 1.x API is no longer used or necessary in most Metacat deployments, restricting access to the old API endpoints can reduce or eliminate exposure for 2.19.x deployments. After removing those features, restart Tomcat or whichever software is hosting the servlets.

CVE-2026-0392 7.3 Élevée 00:10

Latvijas Valsts radio un televīzijas centrs (LVRTC) eParakstītājs 3.0

eParakstītājs 3.0 for Windows before version 1.10.0 retrieves and executes its automatic updates over a channel that is not authenticated or integrity-protected. On each launch the application fetches an update descriptor (XML) over TLS but accepts any TLS certificate (a permissive TrustManager and a HostnameVerifier that always returns true), does not verify any digital signature on the update descriptor, and does not verify the Authenticode signature or a checksum of the downloaded installer before running it. A man-in-the-middle attacker able to redirect www.eparaksts.lv can serve a crafted update descriptor pointing to an attacker-controlled executable, which the client downloads and executes, resulting in arbitrary code execution on the victim host.

CVE-2026-10848 8.6 Élevée 00:10

zephyrproject zephyr

The OCPP 1.6 client in subsys/net/lib/ocpp parsed inbound WAMP RPC frames in parse_rpc_msg() (subsys/net/lib/ocpp/ocpp_j.c) using a hand-rolled helper, extract_string_field(), that copied the message's uid and action fields with strncpy(out_buf, token + 1, outlen - 1) and then scanned the result with strchr(out_buf, '"'). Because strncpy does not NUL-terminate the destination when the source is at least outlen - 1 (127) bytes long, the subsequent strchr reads past the 128-byte destination buffer into adjacent stack memory; if a " byte is found beyond the buffer, a one-byte out-of-bounds NUL write also occurs. A related defect in extract_payload() runs strchr/strrchr over the receive buffer, which may not be NUL-terminated when a maximal-length frame fills it. The parsed bytes come directly from the OCPP central-system server over a websocket: the reader thread fills recv_buf via websocket_recv_msg() and calls parse_rpc_msg() on each inbound DATA frame (subsys/net/lib/ocpp/ocpp.c). A malicious or compromised central server, or an on-path attacker (OCPP is commonly deployed over plain ws://), can send an RPC frame whose uid or action field is 127+ bytes with no closing quote, triggering the out-of-bounds access. The primary impact is a remotely triggerable denial of service: the unbounded scan can fault on an unmapped page, and the stray NUL write can corrupt adjacent stack state. The over-read data is not reflected to the peer, so disclosure is limited. The feature is EXPERIMENTAL and must be explicitly enabled (CONFIG_OCPP). The fix replaces the manual parser with the bounds-respecting json_mixed_arr_parse() and copies the extracted uid with an explicitly NUL-terminated buffer, eliminating both over-reads.

CVE-2026-67332 6.4 Moyenne 00:10

better-auth oauth-provider

@better-auth/oauth-provider before 1.7.0-beta.4 fails to bind access-token audience to the authorization grant, allowing clients to request tokens for unrelated resources. Attackers can complete an OAuth flow and obtain access tokens whose audience targets resource servers the authorization never covered, bypassing intended authorization boundaries.

CVE-2026-55768 8.7 Élevée 00:10

allinurl goaccess

GoAccess is a real-time web log analyzer and interactive viewer that runs in a terminal in *nix systems or through the browser. Prior to version 1.11, the built-in WebSocket server narrows a 64-bit extended frame length into the signed 32-bit WSFrame.payloadlen field before enforcing the maximum frame size, allowing an unauthenticated remote client to bypass the guard and force an approximately 18-exabyte allocation request that terminates the process. This issue is fixed in version 1.11.

CVE-2026-65835 6.6 Moyenne 00:10

projectcapsule capsule

Capsule is a multi-tenancy and policy-based framework for Kubernetes. From 0.13.0 until 0.13.8, after the incomplete CVE-2026-22872 fix, TenantResource RawItems and Generators in internal/controllers/resources/collect.go, including handleRawItem and handleGeneratorItem, did not apply the ResourceReference.LoadResources and IsNamespacedGVK cluster-scoped resource rejection guard used by NamespacedItems, allowing a Tenant Owner to create cluster-scoped resources such as ClusterRole or ValidatingWebhookConfiguration through the cluster-admin controller client. This issue is fixed in version 0.13.8.

CVE-2026-59881 6.9 Moyenne 00:10

aio-libs aiohttp

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.2, the WebSocket client accepts and decompresses frames with the RSV1 bit set even when the permessage-deflate extension was not negotiated, allowing a malicious server to cause unexpected CPU and memory consumption. This issue is fixed in version 3.14.2.

CVE-2026-54722 8.7 Élevée 00:10

HackingRepo dssrf-js

DSSRF is a Node.js library that provides a wide range of utilities and advanced SSRF defense checks. Prior to 1.0.4, is_url_safe in src/helpers.ts strips the @ userinfo delimiter with remove_at_symbol_in_string before new URL parses the URL, allowing an attacker-controlled URL to bypass internal-IP validation and cause a client using the original URL to reach an internal service. This issue is fixed in version 1.0.4.

CVE-2026-52680 9.8 Critique 00:10

Apache Software Foundation Apache Kyuubi · Apache kyuubi

Apache Kyuubi REST batch multipart upload handling uses the client-supplied multipart filename when creating a temporary uploaded resource. A remote attacker who can access the REST batch upload endpoint can provide path traversal sequences in the filename and cause the Kyuubi server process to write controlled content outside the intended upload directory, subject to filesystem permissions. This issue affects Apache Kyuubi: from 1.7.0 through 1.11.1. Users are recommended to upgrade to version 1.12.0, which fixes the issue.

CVE-2026-67345 8.1 Élevée 00:10

dromara MaxKey

MaxKey through 4.1.12, fixed in commit ddbb72f, contains an insufficient redirect URI validation vulnerability in DefaultRedirectResolver.hostMatches() that allows remote attackers to hijack OAuth 2.0 authorization codes by supplying a crafted redirect_uri whose hostname suffix matches a registered URI without proper dot-boundary anchoring. Attackers who control a domain ending with the registered redirect URI hostname can social-engineer victims into clicking a crafted authorization URL, causing the authorization code to be issued to the attacker-controlled URI and exchanged for an access token granting access to the victim's identity.

CVE-2026-65635 8.3 Élevée 00:10

malach-it boruta

Improper Isolation or Compartmentalization vulnerability in malach-it boruta (Elixir.Boruta.Openid module) allows attackers to register OpenID Connect clients with administrative privileges through the dynamic client registration entry point. Boruta.Openid.register_client/3 forwards caller-supplied registration parameters to the administrative client creation path without a public/admin field-level allowlist, so an unauthenticated registrant can set security-sensitive attributes including supported grant types, authorized scopes, PKCE enforcement, public refresh and revocation behavior, token lifetimes, and signing settings. The library does not distinguish between metadata a public registrant is allowed to set and administrative controls that should require operator approval. This vulnerability is associated with program files lib/boruta/openid.ex and program routines 'Elixir.Boruta.Openid':register_client/3, 'Elixir.Boruta.Openid':parse_registration_params/2. This issue affects boruta from 2.3.0 before 2.3.7.

CVE-2026-54885 6.9 Moyenne 00:10

malach-it boruta

Server-Side Request Forgery vulnerability in malach-it Boruta allows an unauthenticated remote attacker to cause the OAuth/OpenID authorization server to issue outbound HTTP requests to attacker-chosen URIs, including internal services and cloud metadata endpoints. Three code paths fetch remote URIs supplied by the requester without sufficient validation of the target. Boruta.Oauth.Request.Base.fetch_unsigned_request/1 in lib/boruta/oauth/request/base.ex dereferences the OAuth request_uri parameter from the authorization request via Finch.build(:get, request_uri) |> Finch.request(OpenIDHttpClient). Boruta.Openid.parse_registration_params/2 in lib/boruta/openid.ex dereferences the jwks_uri supplied in an OpenID Connect dynamic client registration request. Boruta.Ecto.Clients.refresh_jwk_from_jwks_uri/1 in lib/boruta/adapters/ecto/clients.ex later refreshes the stored jwks_uri for an existing client. In all three paths the only validation is that the URI parses with a scheme (and one of the two request_uri clauses does not even restrict the scheme to http or https). The implementations do not require HTTPS, do not enforce a host or IP allowlist, do not reject loopback, private, link-local, or other non-public ranges after DNS resolution, do not cap response size, and do not constrain redirects. An attacker can therefore steer the server's HTTP client at arbitrary network targets reachable from the Boruta host. This issue affects boruta: from 2.3.2 before 2.3.7.

CVE-2026-53431 9.1 Critique 00:10

malach-it boruta

Authentication Bypass by Capture-replay vulnerability in malach-it Boruta allows an attacker who has obtained a previously valid JWT client assertion to authenticate as the issuing OAuth client after the assertion has expired. Boruta accepts JWT-based client authentication (client_secret_jwt and private_key_jwt token endpoint authentication methods) but never enforces that the assertion's exp claim is in the future. The pre-check helper Boruta.Oauth.Request.Base.check_expiration/1 in lib/boruta/oauth/request/base.ex only verifies that an exp claim is present (it pattern-matches on the existence of the key and returns success), and the Joken token configuration used for signature verification, Boruta.Oauth.Authorization.Client.Token.token_config/0 in lib/boruta/oauth/authorization/client.ex, returns an empty map, so Joken's default exp claim validator is not engaged either. Any attacker who obtains a validly-signed client assertion (for example through logs, reverse proxies, browser tooling, or other observability surfaces) can replay it indefinitely to authenticate as the client and obtain access tokens with that client's privileges. This issue affects boruta: from 2.3.0 before 2.3.7.

CVE-2026-18382 6.8 Moyenne 00:10

Red Hat Cost Management 4 · Redhat cost management metrics operator

A flaw was found in koku-metrics-operator. The operator's CostManagementMetricsConfig custom resource allows a user able to edit the CR to specify an arbitrary OAuth token endpoint. When authentication.type is set to service-account, the operator sends the tenant's Red Hat SSO client_id and client_secret to this user-controlled URL, allowing the attacker to obtain the credentials.

CVE-2026-18353 8.8 Élevée 00:10

Eclipse Foundation Eclipse CSI - PIA

PIA's `POST /v1/upload/sbom` endpoint accepts a Bearer JWT and checks its **unverified** `iss` claim against an issuer allowlist using Python's `urlparse` before performing OIDC discovery with `requests`. Because `urlparse` and `requests`/`urllib3` parse an authority string containing a backslash (e.g. `https://attacker-host\@ci.eclipse.org/`) into *different* hostnames, an attacker can craft an issuer that passes the allowlist check yet drives `requests` — and subsequently `urllib.request.urlopen` for JWKS retrieval — to connect to an arbitrary attacker-chosen host, port, and scheme.

CVE-2026-64635 5.3 Moyenne 00:10

Veeam Service Provider Console

Improper handling of the returnUrl parameter in the Forgot Password function of Veeam Service Provider Console allows an unauthenticated attacker to control the domain of the generated password reset link. When the targeted user clicks the link delivered by email, the reset code is transmitted to an attacker-controlled host, allowing the attacker to take over the account.

CVE-2026-59328 5.4 Moyenne 00:10

Spring Tools for Eclipse · Broadcom spring tools

Spring Tools for Eclipse renders Spring Boot starter wizard dependency tooltips in a native embedded browser (SWT Browser) with JavaScript enabled. Using untrusted and compromised Initializr endpoints for the Spring Boot starter wizard can result in arbitrary script execution inside the embedded browser when a developer hovers a dependency checkbox in the New Spring Starter Project wizard. Impact is limited to in-IDE UI spoofing and outbound network beaconing rather than full code execution. Affected Spring Products and Versions: Spring Tools for Eclipse: 5.2.0 and earlier

CVE-2026-59327 4.4 Moyenne 00:10

Spring Tools for Eclipse · Broadcom spring tools

Spring Tools for Eclipse stores the Spring Boot DevTools remote secret (spring.devtools.remote.secret) as a plain string attribute on the "Spring Boot DevTools Client" launch configuration. Eclipse persists launch configuration attributes as cleartext XML, either to workspace metadata or, if the user marks the configuration as a shared file, directly into the project tree where it can be committed to version control. This secret is the sole credential protecting the DevTools remote restart/reload endpoint, which accepts and executes arbitrary class bytes on the target application. Anyone able to read the .launch file (via filesystem access, a workspace backup, or a shared VCS repository) can extract the secret and use it to achieve remote code execution against the associated Spring Boot application. Affected Spring Products and Versions: Spring Tools for Eclipse: 5.2.0 and earlier

CVE-2026-56850 4.4 Moyenne 00:10

nodejs node · Nodejs node.js

A flaw in Node.js HTTPS Agent connection reuse can cause PFX object-array key collisions, allowing mutual TLS (mTLS) client identities to be reused across requests configured with different client certificates. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.

CVE-2026-47882 8.3 Élevée 00:10

Spring Tools for Eclipse · Broadcom spring tools

When enabling Spring Boot DevTools support for a remote application target (for example a Docker container or Cloud Foundry app) from the Spring Tools Boot Dashboard, Spring Tools generates a shared secret that authenticates DevTools remote-restart uploads to the deployed application. This secret was generated using a non-cryptographic pseudo-random number generator rather than a cryptographically secure source of randomness. Affected Spring Products and Versions: Spring Tools for Eclipse: 5.2.0 and earlier

CVE-2026-47873 8.0 Élevée 00:10

Spring Tools for Eclipse · Broadcom spring tools

The Boot Dashboard Docker integration in Spring Tools publishes container control ports on all of the host's network interfaces (0.0.0.0) rather than restricting them to loopback. Affected Spring Products and Versions: Spring Tools for Eclipse: 5.2.0 and earlier

CVE-2026-67245 8.1 Élevée 00:10

ASUSTOR Inc. ADM · Asustor data master

A path traversal vulnerability was found in the VPN Clients on the ADM. The vulnerability occurs because user-controlled certificate name input is not sufficiently validated before being used to construct the upload destination path. An authenticated attacker can exploit this issue to write an uploaded certificate file outside the intended VPN certificate directory, subject to process privileges and filesystem permissions. Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.RUN1 as well as from ADM 5.0.0 through ADM 5.1.3.RI81.

CVE-2024-56838 7.2 Élevée 00:10

Siemens RUGGEDCOM ROX MX5000 · Siemens RUGGEDCOM ROX MX5000RE · Siemens RUGGEDCOM ROX RX1400 · Siemens RUGGEDCOM ROX RX1500

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.17.0), RUGGEDCOM ROX MX5000RE (All versions < V2.17.0), RUGGEDCOM ROX RX1400 (All versions < V2.17.0), RUGGEDCOM ROX RX1500 (All versions < V2.17.0), RUGGEDCOM ROX RX1501 (All versions < V2.17.0), RUGGEDCOM ROX RX1510 (All versions < V2.17.0), RUGGEDCOM ROX RX1511 (All versions < V2.17.0), RUGGEDCOM ROX RX1512 (All versions < V2.17.0), RUGGEDCOM ROX RX1524 (All versions < V2.17.0), RUGGEDCOM ROX RX1536 (All versions < V2.17.0), RUGGEDCOM ROX RX5000 (All versions < V2.17.0). The SCEP client available in the affected device for secure certificate enrollment lacks validation of multiple fields. An attacker could leverage this scenario to execute arbitrary code as root user.

CVE-2025-34248 7.2 Élevée 00:10

D-Link Nuclias Connect

D-Link Nuclias Connect firmware versions < 1.3.1.4 contain a directory traversal vulnerability within /api/web/dnc/global/database/deleteBackup due to improper sanitization of the deleteBackupList parameter. This can allow an authenticated attacker to delete arbitrary files impacting the integrity and availability of the system.

CVE-2025-52543 7.5 Élevée 00:10

Copeland LP E3 Supervisory Control · Copeland e3 supervisory controller firmware

E3 Site Supervisor Control (firmware version < 2.31F01) application services (MGW and RCI) uses client side hashing for authentication. An attacker can authenticate by obtaining only the password hash.