Veille CVE

Jeudi 22 octobre 2026

38 CVE

Critique 3 Élevée 11 Moyenne 22 Faible 2 Non évaluée 0 Exploitées (KEV) Tri : plus récentes « Linux » ✕
  1. CVE-2026-98124 5.5 Moyenne

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: smb/client: invalidate fscache for fallocate range operations smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and smb3_collapse_range() modify file contents through server-side range operations. These operations discard the affected page cache, but leave the FS-Cache cookie valid, so a later read may return data cached before the range operation. Fix this by invalidating FS-Cache after outstanding I/O has completed and before modifying the file on the server. Run the following as root on a CIFS mount with fsc enabled and an active CacheFiles backend: bash -c ' MNT=/mnt/cifs FILE="$MNT/repro" # Generate four 1 MiB random blocks: [A][B][C][D]. dd if=/dev/urandom of=/tmp/src bs=1M count=4 status=none # Expected contents after zeroing B: [A][zero][C][D]. cp /tmp/src /tmp/expected dd if=/dev/zero of=/tmp/expected bs=1M seek=1 count=1 \ conv=notrunc status=none cp /tmp/src "$FILE" # Populate FS-Cache, then discard the page cache. sync echo 1 > /proc/sys/vm/drop_caches cat "$FILE" > /dev/null sync echo 1 > /proc/sys/vm/drop_caches fallocate --zero-range -o 1M -l 1M "$FILE" if cmp -s /tmp/expected "$FILE"; then echo "readback: OK" else echo "readback: STALE DATA" fi ' Before this change, the readback differs from /tmp/expected: readback: STALE DATA After this change, it matches: readback: OK

  2. CVE-2026-98125 5.5 Moyenne

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: smb/client: fix stale page cache in insert/collapse range smb3_insert_range() and smb3_collapse_range() use truncate_pagecache_range() to invalidate the affected page cache. However, if off or old_eof is not page-aligned, the boundary pages are only partially zeroed and remain uptodate. As a result, the client may return stale data after a successful insert/collapse range operation. For example, with 4K pages: page 0 page 1 page 2 0------4K 4K------8K 8K------12K ^ ^ off=2K old_eof=10K Page 1 is removed from the page cache, while the boundary pages are only partially zeroed. After COPYCHUNK moves the data on the server, these cached pages may still return stale data. This can be reproduced on a CIFS mount: bash -c ' FILE=/mnt/scratch/repro # Use a 6 KiB file so EOF is not page-aligned. dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none # Expected: a 4 KiB hole followed by the original data. rm -f /tmp/expected truncate -s 4K /tmp/expected cat /tmp/src >> /tmp/expected cp /tmp/src "$FILE" # Prime the page cache before moving data on the server. cat "$FILE" > /dev/null fallocate --insert-range -o 0 -l 4K "$FILE" if cmp -s /tmp/expected "$FILE"; then echo "readback: OK" else echo "readback: STALE DATA" fi ' Fix this by writing back dirty data and discarding the page cache from the start of the page containing off to EOF before moving data on the server.

  3. CVE-2026-114112 8.9 Élevée

    lovell sharp

    Sharp before 0.35.4 bundles a vulnerable libheif dependency that allows attackers to achieve possible remote code execution on glibc-based Linux by supplying crafted images. Attackers can submit malicious AVIF/HEIF input to applications processing untrusted images with sharp, triggering libheif decoding flaws to execute code.

  4. CVE-2026-73973 5.5 Moyenne

    Linuxfabrik monitoring-plugins

    Linuxfabrik Monitoring Plugins provides monitoring plugins for Icinga, Nagios, and related systems. Prior to version 7.0.0, check-plugins/logfile/logfile accepted a free-form --filename path and opened it as root when invoked through the shipped nagios or icinga sudoers allowlist, without confining the resolved path to /var/log. An attacker who controls the monitoring account can select a root-readable file such as /etc/shadow and use --warning-regex . while leaving SUPPRESS_OUTPUT false, causing each nonempty line to be collected in warn_matches and returned through lib.base.oao(). The vulnerable flow passes the expanded scan_path directly to open(), and neither real-path containment nor an allowlist protects the sink. The same fix also confines mysql-logfile and openvpn-client-list paths, allows only documented log roots, and resolves symlinks and parent-directory traversal before checking containment. This issue is fixed in version 7.0.0.

  5. CVE-2026-98126 5.5 Moyenne

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: smb/client: validate new EOF for zero range When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE, smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing the file to grow beyond the caller's file-size limit. Fix this by calling inode_newsize_ok() before sending the zero-range request when the operation would extend EOF. Reproducer, using a file on a CIFS mount: bash -c ' FILE=/mnt/cifs/repro trap "" SIGXFSZ ulimit -f 3072 truncate -s 2M "$FILE" fallocate --zero-range -o 0 -l 4M "$FILE" echo "fallocate rc=$?" stat -c "file size=%s" "$FILE" ' Before this change, the operation succeeds despite the 3 MiB limit: fallocate rc=0 file size=4194304 After this change, fallocate fails and leaves the file at 2 MiB.

  6. CVE-2026-63832 8.8 Élevée

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: add wcid publish check in mt76_sta_add Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add to avoid reinitializing the wcid->poll_list. Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4. According to the corruption information, prev->next was changed to itself. wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2 wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b) wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3) slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192 list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040). mt76_wcid_add_poll+0x95/0xd0 [mt76] mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common] mt7925_rx_check+0xa7/0xc0 [mt7925_common] mt76_dma_rx_poll+0x50d/0x790 [mt76] mt792x_poll_rx+0x52/0xe0 [mt792x_lib]

  7. CVE-2026-98127 5.5 Moyenne

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: smb/client: validate new EOF for insert range smb3_insert_range() does not check if the new file size (i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t range. Use check_add_overflow() to calculate the new EOF. Validate it with inode_newsize_ok() before modifying the file. Reproducer, using a file on a CIFS mount: bash -c ' FILE=/mnt/cifs/repro trap "" SIGXFSZ ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB # A regular write is stopped at 3 MiB. dd if=/dev/zero of="$FILE" bs=1M count=4 status=none stat -c "size after write: %s" "$FILE" # Insert 2 MiB into a 2 MiB file. truncate -s 2M "$FILE" fallocate -i -o 0 -l 2M "$FILE" stat -c "size after insert: %s" "$FILE" ' Before this change, the regular write stops at the 3 MiB limit, but insert range grows the file to 4 MiB: dd: error writing '/mnt/cifs/repro': File too large size after write: 3145728 size after insert: 4194304 After this change, insert range also fails at the limit and leaves the 2 MiB file unchanged: dd: error writing '/mnt/cifs/repro': File too large size after write: 3145728 fallocate: fallocate failed: File too large size after insert: 2097152

  8. CVE-2026-98130 8.1 Élevée

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START The SCTP_CMD_TIMER_START handler checks timer_pending() before calling timer_reduce(). The timer can expire and detach between these operations, causing timer_reduce() to rearm the timer without taking the association reference required for the newly armed timer. The timer callback later unconditionally drops its association reference, which can leave the association reference count unbalanced and result in use-after-free during association teardown. Use the return value of timer_reduce() to determine whether the timer was actually armed. Take the association reference only when timer_reduce() successfully starts a new timer, closing the race between checking the timer state and rearming it. This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero Day Initiative.

  9. CVE-2026-115207 5.5 Moyenne

    Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7 · Red Hat Enterprise Linux 8

    A flaw was found in GNU patch. An attacker can achieve arbitrary file creation outside the intended working directory by enticing a user or automated workflow to apply a specially crafted patch file. Due to missing validation during automatic patch reversal, absolute file paths in patch headers are accepted rather than rejected. Consequently, the utility can create files in arbitrary locations with the permissions of the executing user.

  10. CVE-2026-111079 7.4 Élevée

    Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9

    A flaw was found in Goose. When the terminal integration feature is enabled, the application captures shell command history and sends it verbatim without sanitization to configured Large Language Model (LLM) provider endpoints during queries. If a user enters sensitive data—such as API tokens, passwords, or environment variables containing secrets—in the terminal, this unredacted information is transmitted across trust boundaries. This can lead to sensitive information disclosure, exposing confidential credentials to external service providers and logs.

  11. CVE-2026-114406 6.8 Moyenne

    Red Hat Hardened Images · Red Hat Assisted Installer for Red Hat OpenShift Container Platform 2 · Red Hat cert-manager Operator for Red Hat OpenShift · Red Hat Confidential Compute Attestation

    The system certificate authority (CA) store in Red Hat products, distributed via ca-certificates RPM packages, included multiple root CA certificates of authorities, which signed intermediate CA certificates with weak private keys issued by the eMudhra certificate authority. A man-in-the-middle attacker could use this flaw to issue certificates for arbitrary host names signed by the weak intermediate CA certificates, which would be considered trusted by a TLS/SSL client using system CA store and cause such clients to connect to malicious sites. Due to inability to only distrust specific intermediate certificates in all clients using the system CA store, root CA certificates of authorities that signed weak intermediate CA certificates are being removed.

  12. CVE-2026-85518 6.1 Moyenne

    Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7 · Red Hat Enterprise Linux 8

    A flaw was found in OpenSCAP. When decomposing a Source DataStream (SDS) file, the application does not properly validate relative file path attributes, leading to a path traversal vulnerability. An attacker can exploit this flaw by tricking a user or automated system into decomposing a crafted datastream containing directory traversal sequences. Successful exploitation allows unauthorized file creation or modification outside the intended target directory with the permissions of the executing process.

  13. CVE-2026-114370 3.7 Faible

    Red Hat build of Apache Camel for Spring Boot 4 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Fuse 7

    A flaw was found in the PathResourceManager component of the Undertow web server. This component is responsible for serving static files from the file system. The issue occurs because the mechanism used to verify if a symbolic link points to a safe location only checks if the target path starts with a specific string, without ensuring it matches a full directory name. This could allow an attacker to access files in a sibling directory if that directorys name starts with the same characters as an authorized safe directory.

  14. CVE-2026-114236 3.3 Faible

    Red Hat Confidential Compute Attestation · Red Hat DPU kit for NVIDIA · Red Hat Exploit Intelligence · Red Hat Multicluster Engine for Kubernetes

    storage/pkg/archive.ApplyLayer and ApplyUncompressedLayer may, when processing corrupt or malicious inputs, leak a file descriptor; unbounded repeated calls can exhaust the process’ file descriptor limit

  15. CVE-2026-92824 6.2 Moyenne

    Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Hardened Images

    A flaw was found in libmodulemd. In the module stream v2 rpm-map emission path, an inner loop incorrectly uses the count of digest algorithms as its bound instead of the number of checksums in the current digest table. Crafted modulemd v2 metadata with multiple digest types can trigger an out-of-bounds read during YAML serialization, typically causing a crash and resulting in a denial of service.

  16. CVE-2026-92823 6.2 Moyenne

    Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Hardened Images

    A flaw was found in libmodulemd. In builds with rpmio support enabled, compressed modulemd YAML is decompressed through a custom read handler that does not enforce a cumulative decompressed-size limit before parsing. An attacker who can supply a highly compressible compressed YAML file can cause excessive CPU and memory consumption, resulting in a denial of service.

  17. CVE-2026-92822 6.2 Moyenne

    Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Hardened Images

    A flaw was found in libmodulemd. When parsing module metadata, the xmd field is converted into nested GVariant values through recursive YAML mapping and sequence helpers without a recursion-depth or node-count limit. An attacker who can supply crafted modulemd YAML with deeply nested xmd content can cause stack exhaustion or excessive resource consumption, resulting in a denial of service.

  18. CVE-2026-114038 5.1 Moyenne

    Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7 · Red Hat Enterprise Linux 8

    A flaw was found in device-mapper-multipath. A local user can trigger an out-of-bounds read by sending a command with a format string ending in a trailing percent character to the multipath daemon. This issue can allow the user to expose unintended daemon memory, leading to information disclosure, or cause the daemon to crash, resulting in a Denial of Service (DoS).

  19. CVE-2026-63924 9.8 Critique

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up.

  20. CVE-2026-63926 8.4 Élevée

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: bpf: sockmap: fix tail fragment offset in bpf_msg_push_data When bpf_msg_push_data() inserts data in the middle of a scatterlist entry, it splits the original entry into a left fragment and a right fragment. The right fragment offset is page-local, but the code advances it with `start`, which is the message-global insertion point. For inserts into a non-first SG entry, this over-advances the offset and leaves the split layout inconsistent. Advance the right fragment offset by the fragment-local delta, `start - offset`, which matches the length removed from the front of the original entry.

  21. CVE-2026-98128 5.5 Moyenne

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add() mpi3mr_get_tgtdev_by_addr() increments the target device kref when it returns a device. If a subsequent error triggers a goto out_fail after the tgtdev reference is acquired, the reference is never released because the out_fail path does not call mpi3mr_tgtdev_put(). This prevents the target device structure from ever being freed. Add a tgtdev put in the out_fail path, guarded by a NULL check since tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup path is shared by earlier error cases where tgtdev is still NULL.

  22. CVE-2026-63941 8.8 Élevée

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2 (which traps) or ZCR_EL1 (which does not trap). KVM handles both in different way: - on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own VL limit. This has the potential to break existing SW that relies on the full LEN field to be stateful. - on ZCR_EL1 access, we do absolutely nothing. On restoring the SVE context for an L2 guest, we directly restore the guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the guest's view of the register was updated using the ZCR_EL2 accessor, the value has already been sanitised (with the caveat mentioned above). But if the guest used ZCR_EL1, the raw value is written into the HW, and the L2 guest can now access VLs that it shouldn't. Fix all the above by moving the VL capping to the restore points, ensuring that: - the HW is always programmed with a capped value, irrespective of the accessor being used, - the ZCR_EL2.LEN field is always completely stateful, irrespective of the accessor being used. Additionally, move ZCR_EL2 to be a sanitised register, ensuring that only the LEN field is actually stateful. This requires some creative construction of the RES0 mask, as the sysreg generation script does not yet generate RAZ/WI fields. [maz: rewrote commit message, tidy up access_zcr_el2()]

  23. CVE-2026-98129 5.5 Moyenne

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add() sas_port_alloc_num() can return NULL on memory allocation failure. The return value is passed directly to sas_port_add() without a NULL check, which causes a NULL pointer dereference. Additionally, if sas_port_add() fails, the allocated port is not freed before jumping to out_fail, leaking the sas_port structure. Call sas_port_free() to properly release it.

  24. CVE-2026-106488 8.1 Élevée

    backstage · @backstage plugin-auth-backend-module-oidc-provider · Linuxfoundation backstage\/plugin-auth-backend-module-oidc-provider · Linuxfoundation backstage

    Backstage is an open framework for building developer portals. Prior to 0.4.20, the @backstage/plugin-auth-backend-module-oidc-provider package is affected by improper authentication in the oidc provider. Deployments using OIDC email-based identity resolution with a provider that permits unverified email addresses may allow an authenticated provider user to assume another catalog identity. This may grant access and permissions associated with that user. No direct availability impact is demonstrated. This issue is fixed in version 0.4.20.

  25. CVE-2026-106489 6.5 Moyenne

    backstage · @backstage plugin-techdocs-backend · Linuxfoundation backstage\/plugin-techdocs-backend · Linuxfoundation backstage

    Backstage is an open framework for building developer portals. Prior to 2.2.4, the @backstage/plugin-techdocs-backend package is affected by improper authorization enforcement for techdocs static content. An authenticated user with access to one TechDocs documentation site could craft a URL able to read documentation belonging to a different entity. This only affects deployments using the external TechDocs builder with an external storage provider (S3, GCS, etc.) and the permission framework enabled. Instances that do not use the permission framework are unaffected, since TechDocs content is visible to all authenticated users by design. This issue is fixed in version 2.2.4.

  26. CVE-2026-106490 6.5 Moyenne

    backstage · @backstage plugin-techdocs-backend · Linuxfoundation backstage\/plugin-techdocs-backend · Linuxfoundation backstage

    Backstage is an open framework for building developer portals. Prior to 2.2.4, the @backstage/plugin-techdocs-backend package is affected by improper input validation in techdocs static content requests. When using the Azure Blob Storage provider, an authenticated Backstage user may be able to read restricted TechDocs content when entity-level permissions are enabled. Deployments that intentionally disable the default backend authentication policy may have broader exposure. This issue is fixed in version 2.2.4.

  27. CVE-2026-63887 9.8 Critique

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.)

  28. CVE-2026-63886 9.8 Critique

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this.

  29. CVE-2026-63833 7.1 Élevée

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: ntfs3: reject direct userspace writes to reserved $LX* xattrs NTFS3 uses $LXUID, $LXGID, $LXMOD and $LXDEV as internal WSL permission metadata and reloads them into i_uid, i_gid and i_mode from ntfs_get_wsl_perm(). Because the empty-prefix xattr handler also lets file owners call setxattr() on these names directly, an unprivileged writer on a writable ntfs3 mount can plant root ownership and S_ISUID on their own file and gain euid 0 after inode reload. Reject direct userspace writes to the reserved $LX* names. Internal ntfs3 metadata updates are unchanged because ntfs_save_wsl_perm() writes them via ntfs_set_ea() directly. [almaz.alexandrovich@paragon-software.com: added an additional check for non privileged users]

  30. CVE-2026-106491 6.4 Moyenne

    backstage · @backstage plugin-proxy-backend · Linuxfoundation backstage\/plugin-proxy-backend · Linuxfoundation backstage

    Backstage is an open framework for building developer portals. Prior to 0.6.17, the @backstage/plugin-proxy-backend package is affected by improper input validation in proxy-backend. An authenticated Backstage user could craft a request URL that causes the proxy-backend to forward the request to a path outside the configured base path on the target server. This is limited to target servers already configured as proxy endpoints and requires Backstage authentication by default. This issue is fixed in version 0.6.17.

  31. CVE-2026-63840 7.8 Élevée

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 86ac011ae234c03fb872f4945913391ea1d8862e)

  32. CVE-2026-106492 6.5 Moyenne

    backstage · @backstage backend-defaults · Linuxfoundation backstage\/backend-defaults · Linuxfoundation backstage

    Backstage is an open framework for building developer portals. Prior to 0.16.1 and 0.17.8, the @backstage/backend-defaults package is affected by improper preservation of access restrictions during service credential delegation. An external service credential configured with access restrictions (e.g., read-only) could bypass those restrictions by routing requests through plugin delegation paths. This could allow a restricted service to perform operations beyond its intended scope, including write operations on plugins it was restricted to read-only access for. This issue is fixed in versions 0.16.1 and 0.17.8.

  33. CVE-2026-70387 8.4 Élevée

    OnePlus OxygenOS

    Exposed dangerous method or function and Incorrect Authorization vulnerability in OnePlus OxygenOS on Android. The olc2 logging HAL exposes a binder method that fork()'s and calls execl("/vendor/bin/sh", "sh", "-c", cmd, NULL) with a caller-supplied command string. The only authorization check is getCallingUid() == 0. Because SELinux policy grants binder access to this HAL to a wide client attribute, any uid-0 process in any of those domains (including dumpstate, which is reachable from an unprivileged app via Vulnerability 1) obtains arbitrary command execution. The spawned shell lands in u:r:vendor_qti_init_shell:s0 SELinux context via a policy type_transition, a domain holding all Linux capabilities. This issue affects OxygenOS: from 16.1.0 before 16.1.10.500, from 16.0.0 before 16.0.5.1200, and from 15.0.0 before 15.0.0.2000.

  34. CVE-2026-70386 8.5 Élevée

    OnePlus OxygenOS

    Improper neutralization of special elements used in an OS command ('OS command injection') and Missing Authorization vulnerability in OnePlus OxygenOS on Android. Any locally installed Android application, with no permissions declared and no user interaction beyond launching it, can execute arbitrary shell commands as uid 0 in the u:r:dumpstate:s0 SELinux domain. Two defects combine: (a) OnePlus's atlasservice binder interface accepts setEvent(String8 name, String8 value) from any caller without authorization, and (b) one event handler (OplusAtlasLogWriter::handleEvent, matching event name atlas_event_multimedia_audio_dumpsys) copies the caller-supplied value into the system property oplus.audio.dumpinfo.type and starts the root init service audiodumpinfo, which passes that property value unsanitized to system(). This issue affects OxygenOS: from 16.1.0 before 16.1.10.500, from 16.0.0 before 16.0.5.1200, and from 15.0.0 before 15.0.0.2000.

  35. CVE-2026-106493 4.1 Moyenne

    backstage · @backstage plugin-catalog-backend-module-azure · @backstage plugin-catalog-backend-module-aws · Linuxfoundation backstage

    Backstage is an open framework for building developer portals. Prior to 1.54.6, cloud storage catalog providers did not sufficiently validate object paths. A principal able to create or rename objects in a configured Azure Blob Storage or AWS S3 catalog source could cause catalog descriptors to be read from outside the intended storage boundary, limited to locations reachable with the backend's configured credentials. This issue is fixed in 1.54.6.

  36. CVE-2026-106494 4.9 Moyenne

    backstage · @backstage backend-defaults · Linuxfoundation backstage\/backend defaults · Linuxfoundation backstage

    Backstage is an open framework for building developer portals. Prior to 0.17.8, the @backstage/backend-defaults package is affected by improper input validation in cloud storage url readers. An attacker with write access to a cloud storage bucket used by Backstage could craft object names that could collide with protected files in the output directory. In certain deployment configurations, this could lead to content injection. This issue is fixed in version 0.17.8.

  37. CVE-2026-98146 5.5 Moyenne

    Linux · Linux linux kernel

    In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain struct amdxdna_cmd_chain contains a flexible array annotated with __counted_by(command_count). Since the structure is stored in shared AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently. If command_count is changed to zero, the bounds check generated from __counted_by may fail and trigger a kernel panic. Remove __counted_by to avoid relying on the userspace-controlled command_count for the flexible array bounds check.

  38. CVE-2026-111802 6.6 Moyenne

    Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7 · Red Hat Enterprise Linux 8

    A flaw was found in Nautilus. When a removable drive or disk image is unmounted or ejected, Nautilus prompts the user to empty the trash without verifying whether the trash directory paths are symbolic links. An attacker can exploit this flaw by tricking a user into mounting a crafted storage volume and confirming the prompt to empty the trash, leading to the arbitrary deletion of files accessible to that user.