Mardi 20 octobre 2026

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Address potential out-of-bounds read in resp_worker() Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the owner went away")' fixes the scenario it was intended for by walking the message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it skipped over the bounds checking code that is included in decode_message(). This could lead to issues such as reading past the slab allocation's end, infinite loops or kernel panics. For those issues to happen, a malformed wire message is needed to be sent from the device. Instead of duplicating the bounds checking code already present in decode_message(), use the function inside resp_worker().

Linux · Linux linux kernel

In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix -EIO cleanup order in queue_rq On -EIO, the RDMA queue_rq path reports a host path error and then still cleans up the command and unmaps the SQE DMA. The path error helper completes the request, so that is double cleanup and DMA unmap after the request is already complete. Unmap the SQE first, then report the host path error. Skip the outer command cleanup on that path.

Linux

In the Linux kernel, the following vulnerability has been resolved: dm thin metadata: fix metadata snapshot consistency on commit failure __reserve_metadata_snap() and __release_metadata_snap() modify the superblock's held_root directly in the block_manager's buffer. If the subsequent metadata commit fails, the held_root gets flushed to disk through the abort_transaction path, resulting in inconsistent metadata. Reproducer 1: __reserve_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 14th block inaccessible, to trigger metadata commit failure in the subsequent reserve_metadata_snap operation. The 14th block will be the shadow destination for the index block. dmsetup create tmeta --table "0 112 linear /dev/sdc 0 112 3984 error" 2. Create a 16 MiB thin-pool dmsetup create tdata --table "0 32768 zero" dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1 dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \ /dev/mapper/tdata 128 0 1 skip_block_zeroing" 3. Take a metadata snapshot to trigger metadata commit failure and transaction abort. However, the held_root is written to disk, breaking metadata consistency. dmsetup message tpool 0 "reserve_metadata_snap" thin_check v1.2.2 result: Bad reference count for metadata block 6. Expected 2, but space map contains 1. Bad reference count for metadata block 7. Expected 2, but space map contains 1. Bad reference count for metadata block 13. Expected 1, but space map contains 0. Reproducer 2: __release_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 16th block inaccessible, to trigger metadata commit failure in the subsequent release_metadata_snap operation. The 16th block will be the shadow destination for the index block. dmsetup create tmeta --table "0 128 linear /dev/sdc 0 128 3968 error" 2. Create a 16 MiB thin-pool dmsetup create tdata --table "0 32768 zero" dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1 dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \ /dev/mapper/tdata 128 0 1 skip_block_zeroing" 3. Reserve then release the metadata snapshot, to trigger metadata commit failure and transaction abort. The held_root gets removed from the on-disk superblock, causing inconsistent metadata. dmsetup message tpool 0 "reserve_metadata_snap" dmsetup message tpool 0 "release_metadata_snap" thin_check v1.2.2 result: Bad reference count for metadata block 6. Expected 1, but space map contains 2. Bad reference count for metadata block 7. Expected 1, but space map contains 2. 1 metadata blocks have leaked. Fix by deferring the held_root update to commit time. Additionally, move the existing-snapshot check in __reserve_metadata_snap before the shadow operation to avoid unnecessary work. In __release_metadata_snap, clear pmd->held_root before btree deletion so partial failure leaks blocks rather than leaving a stale reference, and unlock the snapshot block before decrementing its refcount.

Linux

In the Linux kernel, the following vulnerability has been resolved: dm era: fix out-of-bounds memory access for non-zero start sector dm-era tracks writes in target-relative blocks, but era_map() calculates the writeset block before applying the target offset. Tables with a non-zero start sector can therefore pass an absolute mapped-device block to metadata_current_marked(). If the absolute block is beyond the current writeset size, writeset_marked() tests past the end of the in-core bitset. KASAN reports this as a vmalloc-out-of-bounds access. Apply the target offset before calculating the era block so writeset lookups use the target-relative block number.

Linux

In the Linux kernel, the following vulnerability has been resolved: dm-log: fix a bitset_size overflow on 32bit machines Commit c20e36b7631d ("dm log: fix out-of-bounds write due to region_count overflow") made sure that region_count could fit in an unsigned int. But the bitmap memory isn't allocated based on region_count. It uses bitset_size (a size_t variable). The first step of calculating bitset_size is to set it to region_count, rounded up to a multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit architecture, this will make bitset_size wrap around to 0 and fail, despite region_count being valid. Since bitset_size gets divided by 8, it can hold any valid region_count. It just needs a special case to handle the rollover. If it is 0, the value rolled over, and bitset size should be set to the number of bytes needed to hold 2^32 bits.

Linux

In the Linux kernel, the following vulnerability has been resolved: dm: avoid leaking the caller's thread keyring via the table device file The refactoring in commit a28d893eb327 ("md: port block device access to file") accidentally causes the caller's thread keyring to be kept alive long beyond the caller's lifetime. As a result, "cryptsetup luksSuspend" silently fails to wipe the LUKS volume key from memory. In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread keyring to pass the volume key to the kernel. dm-crypt's crypt_set_keyring_key() copies the key material into its own crypt_config structure and then drops its own reference to the key in the keyring with key_put(). With this fix, restoring pre-v6.9 behavior, the copy in the thread keyring is then promptly garbage collected, such that exactly one copy of the volume key remains. This single copy is correctly wiped from memory on "cryptsetup luksSuspend". Without this fix, the thread keyring and the volume key in it remains. This second copy is only freed on "luksClose". "luksSuspend" neither knows about this copy nor has any way to remove it, so the key remains recoverable from RAM after a suspend that is documented to have wiped it. This fix should not introduce new security problems, as the code is anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling task, is the legitimate owner of this long-lived file.

Linux

In the Linux kernel, the following vulnerability has been resolved: dm_early_create: fix freeing used table on dm_resume failure If dm_resume fails, the kernel attempts to free table with dm_table_destroy, but the table was already instantiated with dm_swap_table. This commit skips the call to dm_table_destroy in this case.

Linux

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix a bug if the bio is out of limits If dm_integrity_check_limits fails, the code would exit with DM_MAPIO_KILL. However, the range would be already locked at this point, and it wouldn't be unlocked, resulting in a deadlock. Let's move the limit check up, so that when it exits, no resources are leaked.

Linux

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: don't increment hash_offset twice hash_offset is already incremented in the loop "for (i = 0; i < to_copy; i++, ts--)". Do not increment it again.

Linux

In the Linux kernel, the following vulnerability has been resolved: dma-fence: Make dma_fence_dedup_array() robust against 0-count input dma_fence_dedup_array() returns 1 when called with num_fences == 0: the for-loop body never executes, j stays at 0, and the final `return ++j` yields 1. This contradicts both the kernel-doc ("Return: Number of unique fences remaining in the array") and the natural expectation that 0 input gives 0 output. The caller __dma_fence_unwrap_merge() bails out via the `if (count == 0 || count == 1)` fast path and so is save. But amdgpu_userq_wait_*() could reach the dedup call with a zero local count and dereference an uninitialized fence slot in the array. Make the contract match the documentation by returning 0 early. This also skips an unnecessary sort() call on an empty array.

Linux

In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix use-after-free during unmount During unmount or failure teardown all mon_data structures that contain monitoring event file private data are freed after which kernfs nodes are removed. However, the RDT_DELETED flag is never set for the statically allocated default resource group. A concurrent reader of an event file associated with the default resource group may, after dropping kernfs active protection, block on rdtgroup_mutex while unmount proceeds to free the file private data and destroy the kernfs node without waiting for the reader. When the mutex is released, the reader wakes up, observes that RDT_DELETED is not set for the default group, and dereferences the already-freed file private data. The scenario can be depicted as follows: CPU0 CPU1 /* * Default resource group's * monitoring data accessible via * kernfs file with kernfs_node::priv * pointing to a struct mon_data. * User opens the file for reading. */ rdtgroup_mondata_show() /* arch encounters fatal error */ rdtgroup_kn_lock_live() resctrl_exit() atomic_inc(&rdtgroup_default.waitcount) cpus_read_lock() kernfs_break_active_protection(kn) mutex_lock(&rdtgroup_mutex) cpus_read_lock() resctrl_fs_teardown() mutex_lock(&rdtgroup_mutex) rmdir_all_sub() mon_put_kn_priv() /* Delete all mon_data structures */ rdtgroup_destroy_root() kernfs_destroy_root() rdtgroup_default.kn = NULL mutex_unlock(&rdtgroup_mutex) /* * rdtgroup_default.flags is empty so * rdtgroup_kn_lock_live() returns * &rdtgroup_default */ md = of->kn->priv; /* md points to freed mon_data */ Set RDT_DELETED for the default group unconditionally since the flag does not lead to the freeing of this statically allocated group. Do not allow a new resctrl mount if there are any waiters on default group of previous mount. A new mount will re-initialize the default group that would appear to waiters from previous mount as though the default group is accessible causing them to access the mon_data structures from the previous mount that have been removed.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: macsec: fix use-after-free of metadata_dst on RX SC delete When an offloaded MACsec RX SC is deleted, macsec_del_rxsc_ctx() freed the per-SC metadata_dst with metadata_dst_free(), which kfree()s the object unconditionally and ignores the dst reference count. The RX datapath in mlx5e_macsec_offload_handle_rx_skb() looks up the SC under rcu_read_lock() via xa_load(), takes a reference with dst_hold() and attaches the dst to the skb with skb_dst_set(). A reader that already obtained the rx_sc pointer can race with the delete path and operate on freed memory. Fix the owner side by dropping the reference with dst_release() instead of freeing unconditionally, and convert the RX datapath to dst_hold_safe() so a reader racing the SC delete cannot attach a dst whose last reference was just dropped; only attach it when a reference was actually taken. mlx5e_macsec_add_rxsc() also published sc_xarray_element via xa_alloc() before rx_sc->md_dst was allocated and initialised, so a datapath reader that looked the SC up by fs_id could observe rx_sc with md_dst still NULL or, on weakly-ordered architectures, a non-NULL md_dst pointer whose contents were not yet visible. NULL-check the xa_load() result and md_dst on the datapath, and reorder add_rxsc() so the xa_alloc() publish happens only after md_dst is fully initialised; the xarray RCU publish then pairs with the rcu_read_lock()/xa_load() in the datapath. Note: macsec_del_rxsc_ctx() also kfree()s rx_sc->sc_xarray_element without an RCU grace period while the same datapath reads it under rcu_read_lock(); that is a separate pre-existing issue left to a follow-up patch. Found by 0sec automated security-research tooling (https://0sec.ai).

Linux

In the Linux kernel, the following vulnerability has been resolved: cpu: hotplug: Preserve per instance callback errors cpuhp_invoke_callback() unwinds earlier callbacks for the same hotplug state when one instance fails. The rollback path currently reuses ret, so a successful rollback can hide the original error and make the failed transition look successful. Keep the rollback result separate from the original error.

Linux

In the Linux kernel, the following vulnerability has been resolved: cpu: hotplug: Bound hotplug states sysfs output states_show() adds CPU hotplug state names into a single sysfs buffer using sprintf(). With enough registered states, this can write past the end of the PAGE_SIZE buffer. Use sysfs_emit_at() so output is bounded.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: sit: require CAP_NET_ADMIN in the device netns for changelink ipip6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. sit was the one tunnel type not covered by the recent series that added this check to the other changelink() handlers.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: preserve tc_skb_cb across defragmentation tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through act_ct therefore loses qdisc metadata such as pkt_segs and can trigger WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled. Save and restore the full tc_skb_cb around nf_ct_handle_fragments(), matching the pattern used by ovs_ct_handle_fragments().

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink vti6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink vti_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ipip: require CAP_NET_ADMIN in the device netns for changelink ipip_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink ip6gre_changelink() and ip6erspan_changelink() operate on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate both ops on rtnl_dev_link_net_capable() at their top, before any attribute is parsed.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink ip6_tnl_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ip6_tnl_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

Linux

In the Linux kernel, the following vulnerability has been resolved: ieee802154: admin-gate legacy LLSEC dump operations In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV, LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which sets no .flags, so generic netlink runs them ungated. The modern nl802154 family admin-gates the equivalent reads via NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM. Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev that has an LLSEC key installed; the dump handler writes the raw 16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied verbatim from struct ieee802154_llsec_key.key) into the reply. Recovering the AES key compromises 802.15.4 LLSEC link confidentiality and authenticity, since LLSEC uses CCM* and the same key authenticates and encrypts frames. Impact: any local uid with no capabilities can read the raw 16-byte AES-128 LLSEC key from the kernel keytable on any wpan netdev that has an administrator-installed LLSEC key, by issuing an LLSEC_LIST_KEY dump on the legacy IEEE802154_NL generic-netlink family. Introduce IEEE802154_DUMP_PRIV() mirroring IEEE802154_DUMP() but setting .flags = GENL_ADMIN_PERM, and use it for the four LLSEC dump entries. LIST_PHY and LIST_IFACE retain IEEE802154_DUMP() because the modern nl802154 family exposes their equivalents to unprivileged readers by design (NL802154_CMD_GET_WPAN_PHY and NL802154_CMD_GET_INTERFACE carry "can be retrieved by unprivileged users" annotations).

Linux

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct index into the LMT map table to read another function's LMTLINE physical base address and copy it into the caller's own LMT map table entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the IRQ source, but req->base_pcifunc is a separate payload field and is not sanitized. Reject the request with -EPERM when a VF caller's base_pcifunc is not a valid function under its own PF. is_pf_func_valid() bounds the FUNC field to the PF's configured VF count, keeping the computed index inside the caller's own slot block.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked multiq_dequeue() takes a packet from a band's child with a direct ->dequeue() call after multiq_peek() peeked it. When the child is non-work-conserving the peek stashes the skb in the child's gso_skb, so the direct dequeue returns a different skb and orphans the stash, desyncing the child's qlen/backlog. With a qfq child reached through a peeking parent (e.g. tbf) this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_prio already does and as sch_red and sch_sfb were just fixed to do. The helper is a no-op when the child has no stash, so a work-conserving child is unaffected.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked When taprio's software path peeks a non-work-conserving child qdisc, the child stashes the peeked skb in its gso_skb; taprio_dequeue_from_txq() then takes the packet with a direct child ->dequeue() call, which ignores that stash, orphans the peeked skb and desyncs the child's qlen/backlog. With a qfq child this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_red and sch_sfb now do. The helper returns the child's stashed skb first and is a no-op when there is none, so a work-conserving child is unaffected and the gated path now consumes the skb whose length was charged to the budget.

Linux

In the Linux kernel, the following vulnerability has been resolved: fhandle: reject detached mounts in capable_wrt_mount() The recent fhandle RCU fix moved the mount namespace capability check into capable_wrt_mount(), so a non-NULL mnt_namespace survives the ns_capable() dereference. The helper still assumes the later READ_ONCE(mount->mnt_ns) must be non-NULL because may_decode_fh() checked is_mounted() first. That assumption is not stable. A detached mount from open_tree(..., OPEN_TREE_CLONE) can be dissolved on fput while open_by_handle_at() is between those checks, and umount_tree() can clear mount->mnt_ns. If the helper observes NULL, it dereferences mnt_ns->user_ns and panics. Return false when the RCU read observes a detached mount. This keeps the relaxed permission path conservative: a mount no longer attached to a namespace cannot authorize open_by_handle_at() access.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len before use. The block header must fit. Each table header, on entry and after every next_table_index, must lie inside the skb. The datagram table must fit. Each datagram index and length must stay inside the skb. The header padding must not exceed the datagram length so the receive length does not wrap. Require each next_table_index to move forward so the chain cannot cycle. This was reproduced under KASAN as a slab out of bounds read on a normal downlink receive once the iosm net device is up.

Linux

In the Linux kernel, the following vulnerability has been resolved: mac802154: remove interfaces with RCU list deletion Queue wake, stop, and disable paths walk local->interfaces under RCU. The bulk hardware teardown path removes entries with list_del(), so an asynchronous transmit completion can follow a poisoned list node in ieee802154_wake_queue(). Use list_del_rcu() as in the single-interface removal path. The following unregister_netdevice() waits for in-flight RCU readers before freeing the netdevice, so no separate grace-period wait is needed.

Linux

In the Linux kernel, the following vulnerability has been resolved: ipvs: use parsed transport offset in SCTP state lookup set_sctp_state() reads the SCTP chunk header again in order to drive the IPVS SCTP state table. For IPv6 it computes the offset with sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped extension headers and found the real transport header. This makes the state machine read from the wrong offset for IPv6 SCTP packets that carry extension headers. For example, an INIT packet with an 8-byte destination options header can be scheduled correctly by sctp_conn_schedule(), but set_sctp_state() reads the first byte of the SCTP verification tag as a DATA chunk type. The connection then moves from NONE to ESTABLISHED instead of INIT1, gets the longer established timeout, and updates the active/inactive destination counters incorrectly. This happens even though the SCTP handshake has not completed. Use the parsed transport offset passed down from ip_vs_set_state() for the SCTP chunk-header lookup. For IPv4 and IPv6 packets without extension headers this preserves the existing offset.

Linux

In the Linux kernel, the following vulnerability has been resolved: macsec: don't read an unset MAC header in macsec_encrypt() macsec_encrypt() reads the Ethernet header via eth_hdr(skb) (skb->head + skb->mac_header) to memmove() the 12 source/destination MAC bytes forward and make room for the SecTAG. On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb reaches the macsec ndo_start_xmit() with the MAC header unset, so eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of bounds: a 12-byte heap over-read that is also emitted on the wire as the frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET build flags it as an unset mac header in skb_mac_header(). On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") for exactly this purpose.

Linux

In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Call synchronize_rcu() when unregistering This ensures that any RCU readers traversing the instance list have finished, before releasing the reference on the tracer that the instance points to.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: avoid full teardown before work setup in probe rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for all probe failures. However, drv_data allocation and workqueue allocation can fail before intf_work, autowakeup_work and sleep_work have been initialized. Do not enter the full remove path until the probe has reached the point where those work items are set up. Return directly for drv_data allocation failure, and use a small early cleanup path for workqueue allocation failure. This issue was found by our static analysis tool and then confirmed by manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The early probe exits should not call a common teardown path that assumes the later work setup has already completed. A QEMU PoC forced alloc_ordered_workqueue() to fail before the work initializers are reached. The resulting fail path entered rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cyw: fix heap overflow on a short auth frame brcmf_notify_auth_frame_rx() takes the frame length from the firmware event and copies the frame body with the management header offset subtracted: u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data); ... memcpy(&mgmt_frame->u, frame, mgmt_frame_len - offsetof(struct ieee80211_mgmt, u)); The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When mgmt_frame_len is below that, the subtraction wraps as an unsigned value to a huge length. The memcpy then runs far past the kzalloc'd buffer. A malicious or malfunctioning AP can make the frame short during the external SAE auth exchange, so this is a remotely triggered heap overflow. Reject frames shorter than the management header offset before the copy.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: validate firmware patch bounds rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the firmware version. A malformed firmware patch shorter than the version field can make this subtraction underflow and turn the copy into an oversized read and write during Bluetooth setup. The existing patch_offset + patch_length check can also wrap on 32-bit architectures. Validate the patch length and range without arithmetic overflow before allocating or copying the patch.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate EHT MLE before MLD ID read cfg80211_gen_new_ie() copies ML probe response elements from the parent frame when the parent EHT multi-link element has an MLD ID matching the nontransmitted BSSID index. The code only checked that the extension element had more than one byte before calling ieee80211_mle_get_mld_id(). That helper assumes a BASIC MLE with enough common info and documents that callers must first use ieee80211_mle_type_ok(). Attack chain: malicious AP sends a short EHT MLE in an MBSSID beacon. cfg80211_inform_bss_frame_data() stores the copied IE buffer. cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE. cfg80211_gen_new_ie() sees the EHT MLE in the parent frame. ieee80211_mle_get_mld_id() then reads past the IE boundary. Validate the MLE type and size before reading the MLD ID. This matches the contract required by the MLE helper and rejects the short element before any internal MLE fields are accessed.

Linux

In the Linux kernel, the following vulnerability has been resolved: device property: initialize the remaining fields of fwnode_handle in fwnode_init() If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitialized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. While at it: initialize the remaining fields of struct fwnode_handle too just to be sure. [ Fix typo in commit message. - Danilo ]

Linux

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix handling of AIF enable without AISB When a guest seeks to register IRQs without a summary bit specified, ensure that the associated GAITE then stores 0 for the guest AISB location instead of virt_to_phys(page_address(NULL)).

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Validate length for CCA AES cipher key requests cca_cipher2protkey() derives the copy length for the CPRB parameter block directly from the length field in the key token. Reject the request early if the token length exceeds the available space in the parameter block.

Linux

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Validate length for CCA ECC private key requests cca_ecc2protkey() derives the copy length for the CPRB parameter block directly from the length field in the key token. Reject the request early if the token length exceeds the available space in the parameter block.