Lundi 19 octobre 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL dereference in tb_remove_work() There is a slight race between tb_remove_work() and tb_domain_remove() which leads to dereferencing a NULL tb->root_switch pointer inside tb_free_unplugged_xdomains(): Thread A Thread B tb_remove_work() tb_domain_remove() mutex_lock(&tb->lock) tb_stop() /* doesn't cancel a running callback */ cancel_delayed_work(&tcm->remove_work) ... tb_switch_remove(tb->root_switch) tb->root_switch = NULL mutex_unlock(&tb->lock) mutex_lock(&tb->lock) ... /* without checking ->root_switch */ tb_free_unplugged_xdomains(tb->root_switch) mutex_unlock(&tb->lock) Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains() out of the &tb->lock section and the check for tb->root_switch, in particular. It states: For this reason separate removing the XDomain from the topology data structures (where we need the lock) from unregistering the device from the bus (where remove callbacks of the drivers are being called). tb_free_unplugged_xdomains() belongs to the former group of functions requiring the lock. And it also calls tb_xdomain_remove() which should only be called with &tb->lock held. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.

Linux

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn() If devm_kcalloc() for rx_chn->flows fails in a channel request function, the error path calls k3_udma_glue_release_rx_chn(), which dereferences the NULL rx_chn->flows pointer in k3_udma_glue_release_rx_flow(). Skip the flow release loop in k3_udma_glue_release_rx_chn() when rx_chn->flows is not allocated. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: prevent buffer overflow in page_pool allocation The per‑processor buffering scheme is supported only if the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8). This is already checked in mvpp2_probe() during the initial activation of percpu_pools. However, mvpp2_change_mtu() may later call mvpp2_bm_switch_buffers(priv, true) without this check, which can lead to an out-of-bounds access in the priv->page_pool array in mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ entries, and mvpp2_get_nrxqs() may return exactly that value. The per-CPU scheme then doubles it to nrxqs * 2, exceeding the array bounds. Check that the hardware version is MVPP22 or newer and that the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS before switching to per-CPU mode. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check ras and obj before dereference nbio_v7_9_handle_ras_controller_intr_no_bifring() dereferences ras and obj without checking either for NULL. Both amdgpu_ras_get_context() and amdgpu_ras_find_obj() can return NULL, e.g. during the window between adev->nbio.ras being set (early in amdgpu_ras_init(), by design, to enable the fatal-error interrupt as soon as possible) and the PCIE_BIF ras object actually being created in RAS late_init. Any interrupt in that window crashes in hard-IRQ context. This is analogous to commit d190b459b2a4 ("drm/amdgpu: the warning dereferencing obj for nbio_v7_4"), which fixed the same issue in the nbio_v7_4 handler. Found by Linux Verification Center (linuxtesting.org) with SVACE. (cherry picked from commit c7071767a50a32ed727cf800ac84372429e3b4b3)

Linux

In the Linux kernel, the following vulnerability has been resolved: fbdev: kyro: Validate overlay viewport coordinates The overlay viewport end coordinates are computed from the viewport origin and dimensions using 32-bit unsigned arithmetic. Large input values can cause these calculations to wrap around before the resulting coordinates are passed to SetOverlayViewPort(). SetOverlayViewPort() packs the viewport coordinates into 16-bit register fields. The X coordinates are additionally adjusted by +2 and +1 before being written. Validate the coordinate calculations for 32-bit wraparound and ensure that the adjusted coordinates fit within their 16-bit register fields before calling SetOverlayViewPort(). Found by Linux Verification Center (linuxtesting.org) with SVACE.

Linux

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables() During fuzz testing, the following issue was discovered: BUG: KMSAN: uninit-value in __dma_map_sg_attrs+0x217/0x310 __dma_map_sg_attrs+0x217/0x310 dma_map_sg_attrs+0x4a/0x70 ata_qc_issue+0x9f8/0x1420 __ata_scsi_queuecmd+0x1657/0x1740 ata_scsi_queuecmd+0x79a/0x920 scsi_queue_rq+0x4472/0x4f40 blk_mq_dispatch_rq_list+0x1cca/0x3ee0 __blk_mq_sched_dispatch_requests+0x458/0x630 blk_mq_sched_dispatch_requests+0x15b/0x340 __blk_mq_run_hw_queue+0xe5/0x250 __blk_mq_delay_run_hw_queue+0x138/0x780 blk_mq_run_hw_queue+0x4bb/0x7e0 blk_mq_sched_insert_request+0x2a7/0x4c0 blk_execute_rq+0x497/0x8a0 sg_io+0xbe0/0xe20 scsi_ioctl+0x2b36/0x3c60 sr_block_ioctl+0x319/0x440 blkdev_ioctl+0x80f/0xd70 __se_sys_ioctl+0x219/0x420 __x64_sys_ioctl+0x93/0xe0 x64_sys_call+0x1d6c/0x3ad0 do_syscall_64+0x4c/0xa0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Uninit was created at: __alloc_pages+0x5c0/0xc80 alloc_pages+0xe0e/0x1050 blk_rq_map_user_iov+0x2b77/0x6100 blk_rq_map_user_io+0x2fa/0x4d0 sg_io+0xad6/0xe20 scsi_ioctl+0x2b36/0x3c60 sr_block_ioctl+0x319/0x440 blkdev_ioctl+0x80f/0xd70 __se_sys_ioctl+0x219/0x420 __x64_sys_ioctl+0x93/0xe0 x64_sys_call+0x1d6c/0x3ad0 do_syscall_64+0x4c/0xa0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Bytes 14-15 of 16 are uninitialized Memory access of size 16 starts at ffff88800cbdb000 When processing the last unaligned element of the scatterlist, it is supplemented with missing bytes in the amount of pad_len. These bytes remain uninitialized, which leads to a problem. Extend last_sg->length by pad_len first, then use sg_zero_buffer() to zero those pad_len bytes. sg_zero_buffer() uses sg_miter internally, which correctly handles sg entries spanning multiple pages and padding that crosses a page boundary. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.