Lundi 19 octobre 2026

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7 · Red Hat Enterprise Linux 8

A flaw was found in GIMP. An integer overflow occurs in the file-pvr plug-in when calculating memory buffer sizes for image dimensions. By tricking a user into opening or previewing a specially crafted PowerVR (.pvr) file, an attacker can trigger a heap-based buffer overflow, potentially leading to arbitrary code execution or a Denial of Service (DoS) via an application crash.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add buffer overflow check in MS get_info_ioctl Add validation that the info size returned from the metric stream info query is not exceeded when checked against the allocated buffer size. If the firmware returns a size larger than the buffer, reject the operation with -EOVERFLOW instead of proceeding with an incorrect buffer copy.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix signed integer truncation in IPC receive Fix potential buffer overflow where firmware-supplied data_size is cast to signed int before being used in min_t(). Large unsigned values (>= 0x80000000) become negative, causing unsigned wraparound and oversized memcpy operations that can overflow the stack buffer. Change min_t(int, ...) to min() as both values are unsigned and can be handled by min() without explicit cast.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9

In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_bvec_write_partial() zram_read_page() picks the sync or async backing device read path based on whether the parent bio is NULL. zram_bvec_write_partial() passes its parent bio down, so for ZRAM_WB slots the read is dispatched asynchronously and zram_read_page() returns 0 while the bio is still in flight. The caller then runs memcpy_from_bvec(), zram_write_page() and __free_page() on the buffer, leaving the async read to write into a freed page. zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d ("zram: fix synchronous reads") for the same reason; the write_partial counterpart was missed.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: drm/gem: Try to fix change_handle ioctl, attempt 4 [airlied: just added some comments on how to reenable] On-list because the cat is out of the bag and we're clearly not good enough to figure this out in private. The story thus far: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle") tried to fix a race condition between the gem_close and gem_change_handle ioctls, but got a few things wrong: - There's a confusion with the local variable handle, which is actually the new handle, and so the two-stage trick was actually applied to the wrong idr slot. 7164d78559b0 ("drm/gem: fix race between change_handle and handle_delete") tried to fix that by adding yet another code block, but forgot to add the error handling. Which meant we now have two paths, both kinda wrong. - dc366607c41c ("drm: Replace old pointer to new idr") tried to apply another fix, but inconsistently, again because of the handle confusion - this would be the right fix (kinda, somewhat, it's a mess) if we'd do the two-stage approach for the new handle. Except that wasn't the intent of the original fix. We also didn't have an igt merged for the original ioctl, which is a big no-go. This was attempted to address off-list in the original bugfix, and amd QA people claimed the bug was fixed now. Very clearly that's not the case. Here's my attempt to sort this out: - Rename the local variable to new_handle, the old aliasing with args->handle is just too dangerously confusing. - Merge the gem obj lookup with the two-stage idr_replace so that we avoid getting ourselves confused there. - This means we don't have a surplus temporary reference anymore, only an inherited from the idr. A concurrent gem_close on the new_handle could steal that. Fix that with the same two-stage approach create_tail uses. This is a bit overkill as documented in the comment, but I also don't trust my ability to understand this all correctly, so go with the established pattern we have from other ioctls instead for maximum paranoia. - Adjust error paths. I've tried to make the error and success paths common, because they are identical except for which handle is removed and on which we call idr_replace to (re)install the object again. But that made things messier to read, so I've left it at the more verbose version, which unfortunately hides the symmetry in the entire code flow a bit. - While at it, also replace the 7 space indent with 1 tab. And finally, because I flat out don't trust my abilities here at all anymore: - Disable the ioctl until we have the igt situation and everything else sorted out on-list and with full consensus. v2: Sashiko noticed that I didn't handle the error path for idr_replace correctly, it must be checked with IS_ERR_OR_NULL like in gem_handle_delete. So yeah, definitely should just the existing paths 1:1 because this is endless amounts of tricky. Also add the Fixes: line for the original ioctl, I forgot that too.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix linked reg delta tracking when src_reg == dst_reg Consider the case of rX += rX where src_reg and dst_reg are pointers to the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first modifies the dst_reg in-place, and later in the delta tracking, the subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the post-{add,sub} value instead of the original source. This is problematic since it sets an incorrect delta, which sync_linked_regs() then propagates to linked registers, thus creating a verifier-vs-runtime mismatch. Fix it by just skipping this corner case.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix ld_{abs,ind} failure path analysis in subprogs Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types. The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed. This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: bpf: fix mm lifecycle in open-coded task_vma iterator The open-coded task_vma iterator reads task->mm locklessly and acquires mmap_read_trylock() but never calls mmget(). If the task exits concurrently, the mm_struct can be freed as it is not SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free. Safely read task->mm with a trylock on alloc_lock and acquire an mm reference. Drop the reference via bpf_iter_mmput_async() in _destroy() and error paths. bpf_iter_mmput_async() is a local wrapper around mmput_async() with a fallback to mmput() on !CONFIG_MMU. Reject irqs-disabled contexts (including NMI) up front. Operations used by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async) take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from NMI or from a tracepoint that fires with those locks held could deadlock. A trylock on alloc_lock is used instead of the blocking task_lock() (get_task_mm) to avoid a deadlock when a softirq BPF program iterates a task that already holds its alloc_lock on the same CPU.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars When regsafe() compares two scalar registers that both carry BPF_ADD_CONST, check_scalar_ids() maps their full compound id (aka base | BPF_ADD_CONST flag) as one idmap entry. However, it never verifies that the underlying base ids, that is, with the flag stripped are consistent with existing idmap mappings. This allows construction of two verifier states where the old state has R3 = R2 + 10 (both sharing base id A) while the current state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap creates two independent entries: A->B (for R2) and A|flag->C|flag (for R3), without catching that A->C conflicts with A->B. State pruning then incorrectly succeeds. Fix this by additionally verifying base ID mapping consistency whenever BPF_ADD_CONST is set: after mapping the compound ids, also invoke check_ids() on the base IDs (flag bits stripped). This ensures that if A was already mapped to B from comparing the source register, any ADD_CONST derivative must also derive from B, not an unrelated C.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file acquires the lock first. A remote BLE device can send a crafted L2CAP ECRED reconfiguration response to corrupt the channel list while another thread is iterating it. Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(), and l2cap_chan_unlock() and l2cap_chan_put() after, matching the pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Take state lock for af_unix iter When a BPF iterator program updates a sockmap, there is a race condition in unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1] during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ---------- // unix_stream_bpf_update_proto() sk_pair = unix_peer(sk) if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(sk); unix_peer(sk) = NULL; sock_put(skpair) sock_hold(sk_pair) // UaF More practically, this fix guarantees that the iterator program is consistently provided with a unix socket that remains stable during iterator execution. [1]: BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490 Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231 Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x170/0x4f3 kasan_report+0xe4/0x1c0 kasan_check_range+0x125/0x200 unix_stream_bpf_update_proto+0x155/0x490 sock_map_link+0x71c/0xec0 sock_map_update_common+0xbc/0x600 sock_map_update_elem+0x19a/0x1f0 bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217 bpf_iter_run_prog+0x21e/0xae0 bpf_iter_unix_seq_show+0x1e0/0x2a0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x63/0x80 kmem_cache_alloc_noprof+0x1d5/0x680 sk_prot_alloc+0x59/0x210 sk_alloc+0x34/0x470 unix_create1+0x86/0x8a0 unix_stream_connect+0x318/0x15b0 __sys_connect+0xfd/0x130 __x64_sys_connect+0x72/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x47/0x70 kmem_cache_free+0x11c/0x590 __sk_destruct+0x432/0x6e0 unix_release_sock+0x9b3/0xf60 unix_release+0x8a/0xf0 __sock_release+0xb0/0x270 sock_close+0x18/0x20 __fput+0x36e/0xac0 fput_close_sync+0xe5/0x1a0 __x64_sys_close+0x7d/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Linux · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl() Two error handling issues exist in xe_exec_queue_create_ioctl(): 1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in preempt fence mode, xe_vm_add_compute_exec_queue() has already added the queue to the VM's compute exec queue list. Skipping the kill leaves the queue on that list, leading to a dangling pointer after the queue is freed. 2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has succeeded, the error path does not call xe_hw_engine_group_del_exec_queue() to remove the queue from the hw engine group list. The queue is then freed while still linked into the hw engine group, causing a use-after-free. Fix both by: - Changing the xe_hw_engine_group_add_exec_queue() failure path to jump to kill_exec_queue so that xe_exec_queue_kill() properly removes the queue from the VM's compute list. - Adding a del_hw_engine_group label before kill_exec_queue for the xa_alloc() failure path, which removes the queue from the hw engine group before proceeding with the rest of the cleanup. (cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8)

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6

In the Linux kernel, the following vulnerability has been resolved: futex: Drop CLONE_THREAD requirement for private default hash alloc Currently need_futex_hash_allocate_default() depends on strict pthread semantics, abusing CLONE_THREAD. This breaks the non-concurrency assumptions when doing the mm->futex_ref pcpu allocations, leading to bugs[0] when sharing the mm in other ways; ie: BUG: KASAN: slab-use-after-free in futex_hash_put ... where the +1 bias can end up on a percpu counter that mm->futex_ref no longer points at. Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding vfork keeps the existing paths untouched (no overhead), and we can't race in the first place: either the parent is suspended and the child runs alone, or mm->futex_ref is already allocated from an earlier CLONE_VM.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: handle empty bo and UAF races There look to be some nasty races here when triggering the invalidate_mappings hook: 1) We do xe_bo_alloc() followed by the attach, before the actual full bo init step in xe_dma_buf_init_obj(). However the bo is visible on the attachments list after the attach. This is bad since exporter driver, say amdgpu, can at any time call back into our invalidate_mappings hook, with an empty/bogus bo, leading to potential bugs/crashes. 2) Similar to 1) but here we get a UAF, when the invalidate_mappings hook is triggered. For example, we get as far as xe_bo_init_locked() but this fails in some way. But here the bo will be freed on error, but we still have it attached from dma-buf pov, so if the invalidate_mappings is now triggered then the bo we access is gone and we trigger UAF and more bugs/crashes. To fix this, move the attach step until after we actually have a fully set up buffer object. Note that the bo is not published to userspace until later, so not sure what the comment "Don't publish the bo until we have a valid attachment", is referring to. We have at least two different customers reporting hitting a NULL ptr deref in evict_flags when importing something from amdgpu, followed by triggering the evict flow. Hit rate is also pretty low, which would hint at some kind of race, so something like 1) or 2) might explain this. v2: - Shuffle the order of the ops slightly (no functional change) - Improve the comment to better explain the ordering (Matt B) (cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971)

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6

In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: fix UAF with retry loop Retry doesn't work here, since bo will be freed on error, leading to UAF. However, now that we do the alloc & init before the attach, we can now combine this as one unit and have the init do the alloc for us. This should make the retry safe. Reported by Sashiko. v2: Fix up the error unwind (CI) (cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7)

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put().

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 7 Extended Lifecycle Support

In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: bpf: Free reuseport cBPF prog after RCU grace period. Eulgyu Kim reported the splat below with a repro. [0] The repro sets up a UDP reuseport group with a cBPF prog and replaces it with a new one while another thread is sending a UDP packet to the group. The reuseport prog is freed by sk_reuseport_prog_free(). bpf_prog_put() is called for "e"BPF prog to destruct through multiple stages while cBPF prog is freed immediately by bpf_release_orig_filter() and bpf_prog_free(). If a reuseport prog is detached from the setsockopt() path (reuseport_attach_prog() or reuseport_detach_prog()), sk_reuseport_prog_free() is called without waiting for RCU readers to complete, resulting in various bugs. Let's defer freeing the reuseport cBPF prog after one RCU grace period. Note "e"BPF prog is safe as is unless the fast path starts to touch fields destroyed in bpf_prog_put_deferred() and __bpf_prog_put_noref(). [0]: BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 Read of size 4 at addr ffffc9000051e004 by task slowme/10208 CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495 __udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723 __udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752 __udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6181 [inline] __netif_receive_skb net/core/dev.c:6294 [inline] process_backlog+0xaa4/0x1960 net/core/dev.c:6645 __napi_poll+0xae/0x340 net/core/dev.c:7709 napi_poll net/core/dev.c:7772 [inline] net_rx_action+0x5d7/0xf50 net/core/dev.c:7929 handle_softirqs+0x22b/0x870 kernel/softirq.c:622 do_softirq+0x76/0xd0 kernel/softirq.c:523 </IRQ> <TASK> __local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip_output+0x29f/0x450 net/ipv4/ip_output.c:438 ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508 udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195 udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] __sys_sendto+0x554/0x680 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x415a2d Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003 RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010 R10: 0000000000000000 R11: ---truncated---

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 9

In the Linux kernel, the following vulnerability has been resolved: net: gro: don't merge zcopy skbs skb_gro_receive() can currently copy frags between the source and GRO skb, without checking the zerocopy status, and in particular the SKBFL_MANAGED_FRAG_REFS flag. When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference on the pages in shinfo->frags. Appending those frags to another skb's frags without fixing up the page refcount can lead to UAF. When either the last skb in the GRO chain (the one we would append frags to) or the source skb is zerocopy, don't merge the skbs.

Linux · Red Hat NVIDIA for RHEL 10 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker during coalescing skb_try_coalesce() can attach paged frags from @from to @to. If @from has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same externally-owned or page-cache-backed frags, but the shared-frag marker is currently lost. That breaks the invariant relied on by later in-place writers. In particular, ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP receive coalescing has moved shared frags into an unmarked skb, ESP can see skb_has_shared_frag() as false and decrypt in place over page-cache backed frags. Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged frags. The tailroom copy path does not need the marker because it copies bytes into @to's linear data rather than transferring frag descriptors.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with list_for_each_entry_safe(), which caches the next entry in @tmp before the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may drop the socket lock inside sctp_wait_for_sndbuf(). While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the association cached in @tmp, migrating it to a new endpoint via sctp_sock_migrate() (list_del_init() + list_add_tail() to newep->asocs), and optionally close the new socket which frees the association via kfree_rcu(). The cached @tmp can also be freed by a network ABORT for that association, processed in softirq while the lock is dropped. sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing revalidates @tmp. After a successful return, the iterator advances to the stale @tmp, yielding either a use-after-free (if the peeled socket was closed) or a list-walk onto the new endpoint's list head (type confusion of &newep->asocs as a struct sctp_association *). Both are reachable from CapEff=0; the type-confusion path gives controlled indirect call via the outqueue.sched->init_sid pointer. Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc() returns. @asoc is known to still be on ep->asocs at that point: the only callers that list_del an association from ep->asocs are sctp_association_free() (which sets asoc->base.dead) and sctp_assoc_migrate() (which changes asoc->base.sk), and sctp_wait_for_sndbuf() checks both under the lock before any successful return; a tripped check propagates as err < 0 and the loop bails before the re-derive. The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so the @tmp cached by list_for_each_entry_safe() still covers the lock-held free that ba59fb027307 ("sctp: walk the list of asoc safely") was added for.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 9

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init() mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When ib_create_srq() fails for s1, the error branch destroys s0 but falls through and unconditionally assigns the freed s0 and the ERR_PTR s1 to devr->s0 and devr->s1. This leads to several problems: the lock-free fast path checks "if (devr->s1) return 0;" and treats the ERR_PTR as already initialised; users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences the ERR_PTR and double-frees s0 on teardown. Fix by adding the same `goto unlock` in the s1 failure path.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 9

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use safe list iteration in radar detect work The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to be freed and removed from the list. Guard against this to avoid a slab-use-after-free error.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drop stray 'static' from fast-RX rx_result ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but its per-invocation rx_result is declared static. Concurrent callers then share one instance and can overwrite each other's result between ieee80211_rx_mesh_data() and the switch on res. That can make a packet that was queued or consumed by ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make a packet that should continue return as queued. Make res an automatic variable so each invocation keeps its own result.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: remove station if connection prep fails If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9

In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss() Sashiko points out that the user can specify WQs sharing the same CQ as a part of the uAPI and this will trigger the WARN_ON() then go on to corrupt the kernel. Just reject it outright and fail the QP creation.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 7 Extended Lifecycle Support

In the Linux kernel, the following vulnerability has been resolved: xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s hlist_del_rcu calls under syzkaller load on linux-6.12.y stable (reproduced on 6.12.47, also reachable via the same code path on torvalds/master and on the ipsec tree). Nine unique signatures cluster in the xfrm_state lifecycle, the load-bearing one being: BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline] BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline] BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435 Workqueue: netns cleanup_net Call Trace: __hlist_del / hlist_del_rcu __xfrm_state_delete xfrm_state_delete xfrm_state_flush xfrm_state_fini ops_exit_list cleanup_net The other observed signatures hit the same slab object from __xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB write variant of __xfrm_state_delete, all on the byseq/byspi hash chains. __xfrm_state_delete() guards its byseq and byspi unhashes with value-based predicates: if (x->km.seq) hlist_del_rcu(&x->byseq); if (x->id.spi) hlist_del_rcu(&x->byspi); while everywhere else in the file (e.g. state_cache, state_cache_input) the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets x->id.spi = newspi inside xfrm_state_lock and then immediately inserts into byspi, but a path that observes x->id.spi != 0 outside of xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently with whether x is actually on the list. The same holds for x->km.seq versus byseq, and the bydst/bysrc unhashes have no predicate at all, so a second __xfrm_state_delete() on the same object writes through LIST_POISON pprev. The defensive change here: - Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst, bysrc, byseq and byspi so a second deletion is a no-op rather than a write through LIST_POISON pprev. The byseq/byspi nodes are already initialised in xfrm_state_alloc(). - Test hlist_unhashed() rather than the value predicate for byseq/byspi, so the unhash decision tracks list state rather than mutable scalar fields. Empirical verification: applied this patch on top of v6.12.47, rebuilt, and re-ran the same syzkaller harness for 1h16m on a previously-crashy configuration that produced ~100 hits each of slab-use-after-free Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in __xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at ~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo confirms the xfrm_state slab is actively allocated and freed during the run (~143 KiB resident), so the fuzzer is still exercising those code paths -- they just no longer crash. Reproduction: - Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV - syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db - 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal - 9 unique signatures collected in ~9h, all within xfrm_state lifecycle

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels seg6_input_core() and rpl_input() call ip6_route_input() which sets a NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking dst_hold() unconditionally. On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can release the underlying pcpu_rt between the lookup and the caching through a concurrent FIB lookup on a shared nexthop. Simplified race sequence: ksoftirqd/X higher-prio task (same CPU X) ----------- -------------------------------- seg6_input_core(,skb)/rpl_input(skb) dst_cache_get() -> miss ip6_route_input(skb) -> ip6_pol_route(,skb,flags) [RT6_LOOKUP_F_DST_NOREF in flags] -> FIB lookup resolves fib6_nh [nhid=N route] -> rt6_make_pcpu_route() [creates pcpu_rt, refcount=1] pcpu_rt->sernum = fib6_sernum [fib6_sernum=W] -> cmpxchg(fib6_nh.rt6i_pcpu, NULL, pcpu_rt) [slot was empty, store succeeds] -> skb_dst_set_noref(skb, dst) [dst is pcpu_rt, refcount still 1] rt_genid_bump_ipv6() -> bumps fib6_sernum [fib6_sernum from W to Z] ip6_route_output() -> ip6_pol_route() -> FIB lookup resolves fib6_nh [nhid=N] -> rt6_get_pcpu_route() pcpu_rt->sernum != fib6_sernum [W <> Z, stale] -> prev = xchg(rt6i_pcpu, NULL) -> dst_release(prev) [prev is pcpu_rt, refcount 1->0, dead] dst = skb_dst(skb) [dst is the dead pcpu_rt] dst_cache_set_ip6(dst) -> dst_hold() on dead dst -> WARN / use-after-free For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release the pcpu_rt. Shared nexthop objects provide such a path, as two routes pointing to the same nhid share the same fib6_nh and its rt6i_pcpu entry. Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after ip6_route_input() to force the NOREF dst into a refcounted one before caching. The output path is not affected as ip6_route_output() already returns a refcounted dst.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 7 Extended Lifecycle Support

In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix peer runtime UAF during format-change stop loopback_check_format() may stop the capture side when playback starts with parameters that no longer match a running capture stream. Commit 826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved the peer lookup under cable->lock, but the actual snd_pcm_stop() still runs after dropping that lock. A concurrent close can clear the capture entry from cable->streams[] and detach or free its runtime while the playback trigger path still holds a stale peer substream pointer. Keep a per-cable count of in-flight peer stops before dropping cable->lock, and make free_cable() wait for those stops before detaching the runtime. This preserves the existing behavior while making the peer runtime lifetime explicit.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: selinux: fix overlayfs mmap() and mprotect() access checks The existing SELinux security model for overlayfs is to allow access if the current task is able to access the top level file (the "user" file) and the mounter's credentials are sufficient to access the lower level file (the "backing" file). Unfortunately, the current code does not properly enforce these access controls for both mmap() and mprotect() operations on overlayfs filesystems. This patch makes use of the newly created security_mmap_backing_file() LSM hook to provide the missing backing file enforcement for mmap() operations, and leverages the backing file API and new LSM blob to provide the necessary information to properly enforce the mprotect() access controls.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap inline data write path The inline data buffer head (dibh) is being released prematurely in gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report) 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not available for this issue. The fix is based on analysis of the KASAN report and code review showing the buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]

Linux · Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init() (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this: kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe] rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150 [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

In the Linux kernel, the following vulnerability has been resolved: net/rds: reset op_nents when zerocopy page pin fails When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(), the pinned pages are released with put_page(), and rm->data.op_mmp_znotifier is cleared. But we fail to properly clear rm->data.op_nents. Later when rds_message_purge() is called from rds_sendmsg() the cleanup loop iterates over the incorrectly non zero number of op_nents and frees them again. Fix this by properly resetting op_nents when it should be in rds_message_zcopy_from_user().

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs.

Linux · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8

In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the whole DACL before rewriting it in cifsacl build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a server-supplied dacloffset and then use the incoming ACL to rebuild the chmod/chown security descriptor. The original fix only checked that the struct smb_acl header fits before reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate header-field OOB read, but the rewrite helpers still walk ACEs based on pdacl->num_aces with no structural validation of the incoming DACL body. A malicious server can return a truncated DACL that still contains a header, claims one or more ACEs, and then drive replace_sids_and_copy_aces() or set_chmod_dacl() past the validated extent while they compare or copy attacker-controlled ACEs. Factor the DACL structural checks into validate_dacl(), extend them to validate each ACE against the DACL bounds, and use the shared validator before the chmod/chown rebuild paths. parse_dacl() reuses the same validator so the read-side parser and write-side rewrite paths agree on what constitutes a well-formed incoming DACL.

Red Hat build of Quarkus 3.27.6.redhat · Red Hat build of Quarkus 3.33.4.redhat · Red Hat Enterprise Linux 9 · Red Hat build of Apache Camel 4 for Quarkus 3

A flaw was found in RESTEasy's IIOImageProvider, which decodes attacker-supplied image request bodies without enforcing any limit on the declared image dimensions or pixel count. A remote, unauthenticated attacker can send a small crafted image declaring enormous dimensions to trigger a very large memory allocation, exhausting the JVM heap and resulting in a denial of service.

Red Hat build of Quarkus 3.27.6.redhat · Red Hat build of Quarkus 3.33.4.redhat · Red Hat Enterprise Linux 9 · Red Hat build of Apache Camel 4 for Quarkus 3

A flaw was found in RESTEasy's CorsFilter, which, when configured to allow all origins ("*"), reflects the request's Origin header back in the Access-Control-Allow-Origin response together with Access-Control-Allow-Credentials: true. This permissive cross-origin policy allows a malicious website to make credentialed cross-origin requests and read authenticated responses from a victim's session, resulting in a loss of confidentiality.

Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 6

A flaw was found in GIMP. When processing a specially crafted GIMPressionist preset file, the plug-in does not properly validate vector indices before writing into fixed-size arrays. This can lead to an out-of-bounds write, corrupting memory. An attacker could exploit this by convincing a user to load a malicious preset file, potentially causing a crash or enabling arbitrary code execution.

GNOME GIMP · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 10

A flaw was found in the file-psd plugin in GIMP. When generating a thumbnail preview for a specially crafted PSD (Photoshop Document) image file, an integer overflow occurs during the multiplication of values from an embedded JPEG header. This leads to an undersized heap allocation, resulting in a heap-based buffer overflow when the image data is decoded. This buffer overflow corrupts adjacent heap objects, allowing for a controlled memory write that can result in an application crash or arbitrary code execution.

Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

A flaw was found in GIMP. When processing a specially crafted lighting preset file, the Lighting Effects filter does not properly validate the number of light sources. This can lead to an out-of-bounds write, corrupting memory. An attacker could exploit this by convincing a user to open a malicious preset file, potentially causing a crash or enabling arbitrary code execution.

Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6 · Red Hat Enterprise Linux 7

A flaw was found in GIMP's ICO file loader. When processing an ICO file containing an embedded PNG image, an integer overflow can occur during the calculation of the required buffer size. This leads to an undersized buffer being allocated, causing a heap-based buffer overflow when the decoded pixel data is written. A remote attacker could exploit this by crafting a malicious ICO file, which, when opened, could lead to arbitrary code execution or a crash.

Red Hat Enterprise Linux AI 3.3 for RHEL 9 · Red Hat Enterprise Linux AI 3.4 for RHEL 9 · Red Hat Enterprise Linux AI 3.5 for RHEL 9 · Red Hat AI Inference Server 3.2

A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames.

Red Hat Enterprise Linux AI 3.3 for RHEL 9 · Red Hat Enterprise Linux AI 3.4 for RHEL 9 · Red Hat Enterprise Linux AI 3.5 for RHEL 9 · Red Hat AI Inference Server 3.2

A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory).

Red Hat Enterprise Linux AI 3.3 for RHEL 9 · Red Hat Enterprise Linux AI 3.4 for RHEL 9 · Red Hat Enterprise Linux AI 3.5 for RHEL 9 · Red Hat AI Inference Server 3.2

An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution.

Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 7 Extended Lifecycle Support · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support

A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 10.0 Extended Update Support · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 8.8 Telecommunications Update Service

A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit a vulnerability in the `/ipa/i18n_messages` endpoint by sending an arbitrarily large request body. This can cause the service to consume excessive memory, leading to memory exhaustion, degraded responsiveness, and a denial of service (DoS) condition.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6

A flaw was found in Emacs TRAMP. A local attacker could exploit this vulnerability by processing maliciously crafted filenames. This occurs because TRAMP concatenates login arguments without proper sanitization, which are then passed to a local shell. Successful exploitation could lead to arbitrary code execution.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6

A flaw was found in libsoup. When constructing a masked WebSocket client frame for a very large outgoing payload, size values passed to GByteArray allocation APIs could be truncated while the masking routine still used the full length, causing a heap buffer overflow.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6

A flaw was found in libsoup. When max-incoming-payload-size is unlimited (0), SoupWebsocketConnection could grow its incoming GByteArray based on an attacker-controlled frame length until the length wrapped, causing a heap buffer overflow while reading frame data.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6

A flaw was found in libsoup. When reassembling fragmented WebSocket messages into a GByteArray, libsoup did not adequately cap total message size against the limits of the underlying buffer type. A remote peer could send fragments that caused size truncation while the implementation still used the full length, leading to heap corruption or a crash.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Enterprise Linux 6

A flaw was found in libsoup. When handling an incoming WebSocket Pong frame, SoupWebsocketConnection emitted the ::pong signal with a GByteArray pointer even though the signal is declared to pass a GBytes. Applications connecting a handler that follows the documented GBytes API can trigger heap corruption or a crash upon receiving a crafted Pong.

Red Hat Enterprise Linux 10 · Red Hat Enterprise Linux 8 · Red Hat Enterprise Linux 9 · Red Hat Hardened Images

A flaw was found in environment-modules. A local attacker can exploit this vulnerability by placing a maliciously named modulefile in a location visible to the victim's `MODULEPATH`. When the victim uses Bash completion for `module` or `ml` commands, the malicious module name, containing shell metacharacters, is evaluated as a command. This can lead to arbitrary command execution in the completing user's shell, impacting their confidentiality, integrity, and availability.