Vendredi 16 octobre 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch() reqsk_queue_hash_req() publishes a TCP_NEW_SYN_RECV request_sock onto the ehash chain, drops the bucket lock, and only afterwards sets rsk_refcnt to 3. Lockless readers such as __inet_lookup_established() handle this with refcount_inc_not_zero(), but bpf_iter_tcp_established_batch() uses plain sock_hold() while holding the bucket lock, on the assumption that the lock guarantees sk_refcnt > 0. That assumption does not hold for request_sock: CPU 0 CPU 1 ----- ----- tcp_conn_request() reqsk_queue_hash_req() inet_ehash_insert(req) spin_lock(bucket) __sk_nulls_add_node_rcu(req) // rsk_refcnt == 0 spin_unlock(bucket) bpf_iter_tcp_established_batch() spin_lock(bucket) sock_hold(req) <-- addition on 0 spin_unlock(bucket) refcount_set(&req->rsk_refcnt, 3) // clobbers saturated value which surfaces as: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x48/0x90, CPU#1 Call Trace: bpf_iter_tcp_established_batch+0x14e/0x170 bpf_iter_tcp_batch+0x53/0x200 bpf_iter_tcp_seq_next+0x27/0x70 bpf_seq_read+0x107/0x410 vfs_read+0xb9/0x380 The iterator's stolen reference is lost when the publishing CPU's refcount_set() overwrites the count, leaving the socket one reference short. When the last legitimate owner drops its reference the reqsk is freed while still reachable, leading to use-after-free. This reproduces in seconds with tcp_syncookies=0, a handful of threads doing connect()/close() to a local listener while others read an iter/tcp link in a tight loop. Use refcount_inc_not_zero() and skip the socket on failure. A skipped socket is still part of the bucket, so keep counting it in expected. The reallocations are sized from expected, and a request sock whose refcount gets published while the lock is held across the last realloc must already have room. A skipped socket is counted in expected but never batched, so end_sk can be short of expected on a batch that is actually complete. Decide completeness by whether the walk left any socket behind instead. The WARN after the locked realloc checks the same, replacing an end_sk == expected check that could not hold on that path since commit cdec67a489d4 ("bpf: tcp: Make sure iter->batch always contains a full bucket snapshot"). If every matching socket in a bucket is mid-init (refcount 0), end_sk stays 0. Advance to the next bucket rather than returning a batch entry that was never filled this round.

gomarkdown markdown

The package github.com/gomarkdown/markdown is a Go library for parsing Markdown text and rendering as HTML. Prior to 0.0.0-20260724235538-61af6e1e6971, parser.IsSafeURL in parser/parser.go slices url[:nPath] before the len(url) >= nPath guard. A short destination causes a slice-bounds panic when the loop reaches a relative-path prefix for which len(url) < nPath and cap(url) < nPath. The one-byte destination / is an explicit non-panic counterexample because it matches the first valid path and returns before a longer prefix is sliced. Demonstrated panic cases include empty, ., and .. destinations under those conditions. The panic is reachable when markdown.ToHTML renders untrusted Markdown with html.Safelink enabled, including an empty link destination, and is also reachable by callers that pass a short attacker-controlled URL directly to the exported parser.IsSafeURL function. An uncaught panic can terminate the calling process and cause denial of service. This issue is fixed in 0.0.0-20260724235538-61af6e1e6971.

junrar

Junrar is an open source Java RAR archive library. Prior to 7.6.1, RarVM.ExecuteCode in src/main/java/com/github/junrar/unpack/vm/RarVM.java can repeatedly execute a VM_JMP instruction whose target is greater than or equal to the prepared program's codeSize. The setIP() function returns success without changing the instruction pointer or decrementing maxOpCount, and the jump handler continues before loop-end accounting, leaving both values unchanged. A crafted RAR4 archive can therefore keep an extraction thread in an infinite CPU loop and exhaust archive-processing worker capacity. The RAR virtual machine does not expose native process execution, so the supported impact is availability loss rather than code execution. This issue is fixed in version 7.6.1.

DigiDoc libdigidocpp · DigiDoc4 · DigiDoc Android · DigiDoc iOS

Improper verification of cryptographic signature vulnerability in DigiDoc libdigidocpp, DigiDoc DigiDoc4, DigiDoc DigiDoc Android, and DigiDoc DigiDoc iOS. The vulnerability allows an attacker to create forged digital signatures that are displayed a valid by affected DigiDoc software.This issue affects libdigidocpp: from 4.0.0 before 4.5.0; DigiDoc4: from 4.6.0 before 4.11.0; DigiDoc Android: from 2.7.0 before 3.1.0; DigiDoc iOS: from 2.7.0 before 3.1.0.

tinacms · @tinacms cli

Tina is a headless content management system. Prior to 3.0.0, @tinacms/cli reads Git branch values from VERCEL_GIT_COMMIT_REF, GITHUB_BRANCH, or HEAD, incorporates the raw value into the API URL, and interpolates that URL into JavaScript string literals in packages/@tinacms/cli/src/next/codegen/index.ts and packages/@tinacms/cli/src/next/codegen/codegen/plugin.ts. A crafted Git-valid branch name containing a quote can terminate the generated string and inject an expression that executes when the generated client module is imported during a preview build. The injected code runs with the build process privileges and can read environment credentials, modify deployment artifacts, or make network requests. This issue is fixed in version 3.0.0.

Prowler

Improper Authentication in the social account linking path of the Prowler API in Prowler from 5.4.0 before 5.35.0 allows a remote unauthenticated attacker to obtain persistent access to the account of a user who has not yet registered, because ProwlerSocialAccountAdapter.pre_social_login() in api/src/backend/api/adapters.py links a Google or GitHub login to any existing local account that has the same email address as the one returned by the provider, without requiring that the address has been verified by the provider or on the existing account, and without any other check that both accounts belong to the same person. Self registration is open and the new account is usable at once, because UserViewSet.get_permissions() in api/src/backend/api/v1/views.py grants AllowAny to the create action, ACCOUNT_EMAIL_VERIFICATION is set to none in api/src/backend/config/settings/social_login.py, and the Django ModelBackend checks only the password and is_active, not the django-allauth EmailAddress record. An attacker who registers an email address before its owner keeps the password set at registration after the link is made, because sociallogin.connect() does not reset the password and does not disable the existing account, and the owner who later signs in with Google or GitHub is logged into the attacker's account. django-allauth makes the same email based link on its own, because SOCIALACCOUNT_EMAIL_AUTHENTICATION and SOCIALACCOUNT_EMAIL_AUTHENTICATION_AUTO_CONNECT are both set to True in the same settings module. This gives the attacker the cloud provider credentials, scan findings and tenant memberships held in the account.

Omarchy

omarchy-theme-set in Omarchy 4 before 4.0.1 allows code execution via a third-party theme because the files placed into ~/.local/state/omarchy/current/theme may include executable content from an untrusted Git repository.

Eclipse Foundation Adoptium Temurin

In the Eclipse Adoptium website (adoptium.net), in every deployment built from commit 0b24ea1 (2025-06-18) up to the fix in commit cbb53cf (2026-09-24), the post-download page /[locale]/download takes a download URL from the "link" query parameter and automatically navigates to it with a meta http-equiv="refresh". The URL is checked against a list of trusted prefixes using String.startsWith() on the raw string, while the browser applies RFC 3986 dot-segment normalisation before navigating, so a value such as https://github.com/adoptium/temurin/../../attacker/malware/releases/download/v1/jdk.exe passes the check but resolves to an attacker-controlled repository. A victim who follows a crafted adoptium.net link is shown the genuine "Thank you for downloading Eclipse Temurin" page while their browser downloads a binary of the attacker's choosing

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: Tighten cgroup storage cookie checks for prog arrays The fix in commit abad3d0bad72 ("bpf: Fix oob access in cgroup local storage") is still incomplete. The prog-array compatibility check treats a program with no cgroup storage as compatible with any stored storage cookie. This allows a storage-less program to bridge a tail call chain between an entry program and a storage-using callee even though cgroup local storage at runtime still follows the caller's context, that is, A -> B(no storage) -> C(storage) path. Requiring exact cookie equality would break the legitimate case of a storage-less leaf program being tail called from a storage-using one. Instead, only accept a zero storage cookie if the program cannot perform tail calls itself. This keeps A -> B(no storage) working while rejecting the A -> B(no storage) -> C(storage) bridge.

Linux

In the Linux kernel, the following vulnerability has been resolved: handshake: Require admin permission for DONE command ACCEPT and DONE are the two downcalls of the handshake genl family, both intended for use by the trusted handshake agent (tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has no privilege check at all. The fd-lookup in handshake_nl_done_doit() only confirms that some pending handshake request exists for the supplied sockfd; it does not authenticate the sender. An unprivileged process that guesses or observes a valid sockfd can therefore submit a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel consumer to proceed as if the handshake succeeded. A non-zero status on a forged DONE tears down a legitimate in-flight handshake before tlshd can report its real result.

rdfjs N3.js

N3.js before 2.11.1 contains a regular expression denial of service vulnerability in the N3Lexer number pattern that backtracks quadratically on long digit runs. Attackers can supply untrusted Turtle or N3 input containing long runs of digits that do not end a number, blocking the Node.js event loop and causing denial of service.

magicblack MacCMS

MacCMS v10 through 2026.1000.4056 does not limit attempts on the six-digit password recovery code, allowing unauthenticated attackers to take over member accounts. Attackers knowing a victim's email or phone can request a code and brute-force findpass_reset to overwrite the member's password.

OpenS100 Project OpenS100

OpenS100 through commit 2b1dafc contains an integer overflow vulnerability in the S-102 Bathymetric Surface parser. An attacker can supply a crafted S-102 HDF5 file with malicious grid dimension metadata that causes memory corruption when a user opens it. In the S102_VG_BathymetryCoverage::Read() function, the numPointsLatitudinal and numPointsLongitudinal values are multiplied without validation, and the 32-bit result can wrap around, producing an undersized heap buffer allocation. Subsequent writes past the end of that buffer cause a heap-based buffer overflow, leading to an application crash or potential arbitrary code execution in the context of the user who opened the file.

NetHerman Portal del Hermano (portaldelhermano.es)

Netherman Portal del Hermano (portaldelhermano.es) before 2026-10-06 contains a broken authentication vulnerability in its password-recovery flow at the POST /password/create-access and POST /password/email endpoints, allowing unauthenticated attackers to take over any member account across all tenants by exploiting the lack of rate limiting and distinct error messages that act as oracles for each of the four identity-verification factors (DNI, date of birth, phone number, last four IBAN digits). Attackers can confirm the DNI via the oracle, brute-force the date of birth and IBAN digits, obtain the phone number through open-source intelligence, then submit an attacker-controlled email field so the password reset link is delivered to them, enabling full account takeover including profile data, full IBAN, and fiscal documents.

better-auth sso

Better Auth @better-auth/sso from 1.7.0-rc.2 before 1.7.3 contains an authentication bypass vulnerability that allows authenticated users to sign in as other users by registering a personal SSO provider. Attackers can copy a legitimate provider's OIDC issuer or SAML entity ID and assert a victim's subject or NameID, because account lookup ignores providerId, creating sessions for victim accounts.

gitpython-developers GitPython

GitPython from 3.1.30 before 3.2.0 contains a remote code execution vulnerability in Remote.pull() whose unsafe-option guard inspects only keyword arguments, not the positional refspec. Attackers controlling the refspec can supply --upload-pack=<command> to execute OS commands as the calling process over local-path or SSH transports.

renovatebot renovate · mend renovate-ce · mend renovate-ee-server · mend renovate-ee-worker

Renovate before 44.60.1 contains an allowlist bypass vulnerability that allows repositories to set restricted environment variables by placing env inside a shared preset. Attackers controlling an externally sourced preset can override variables like PATH, LD_PRELOAD, NODE_OPTIONS, or GIT_SSL_CAINFO in child processes on self-hosted instances.

gitpython-developers GitPython

GitPython before 3.2.0 contains an argument injection vulnerability in Head.checkout() that allows remote attackers to read arbitrary files by supplying a branch name parsed as a git option. Attackers can host a repository whose default branch is named --pathspec-from-file=<path>, causing cloning applications that check out the active branch to leak file contents through GitCommandError messages.

pupnp

pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.2, ixmlNode_compare in ixml/src/node.c passes the nullable nodeValue, namespaceURI, prefix, and localName fields directly to strcmp. Non-namespaced attributes created by ixmlDocument_createAttribute legitimately leave those fields NULL. When ixmlElement_removeAttributeNode compares two distinct attribute objects with the same nodeName through find_condition_node, the pointer-identity shortcut does not apply and the comparison dereferences NULL, causing a process crash when application handling of attacker-controlled XML reaches this path. This issue is fixed in 2.0.2.

cyberlord92 miniOrange OTP Login, Verification and SMS Notifications

The miniOrange OTP Login, Verification and SMS Notifications plugin for WordPress is vulnerable to Authentication Bypass in versions up to, and including, 5.5.8 via the `mo_by_pass_login()` function. This is due to `mo_delay_otp_process()` short-circuiting the authentication flow before password validation or the administrator intent gate (added in 5.5.6) can run, combined with the Delay OTP grace flag (`mov_last_verified_dttm`) being stored as a `user_meta` row keyed solely by target user ID with no binding to the originating session, cookie, IP address, or device. This makes it possible for unauthenticated attackers to authenticate as any WordPress user — including administrators — by submitting only a known username with the `mo_wp_login_intent=otp` parameter and any non-empty password, thereby inheriting a legitimate user's open Delay OTP grace window without ever supplying correct credentials. Exploitation requires the site to have OTP-only login (`wp_login_skip_password=1`, `wp_login_skip_password_fallback=0`) and Delay OTP Verification (`wp_login_delay_otp=1`) enabled, and the target account must currently be within its configured Delay OTP interval.

SureCart – Ecommerce Made Easy For Selling Physical Products, Digital Downloads, Subscriptions, Donations, & Payments

The SureCart – Ecommerce Made Easy For Selling Physical Products, Digital Downloads, Subscriptions, Donations, & Payments plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'comment' parameter in all versions up to, and including, 4.9.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful execution requires the affected comment to appear on a post that loads the surecart-components runtime (e.g. via a [sc_buy_button] shortcode) and contains no sc-checkout element, as these conditions trigger the innerHTML sink in sc-cart-loader.

Spring AI · Vmware spring ai

The MCP Streamable HTTP server transport (WebFlux and WebMvc variants) does not place any limit on the number of sessions it retains, and by default does not require clients to be authenticated. As a result, a remote attacker can cause the server to accumulate an unbounded number of sessions over time, gradually exhausting available memory and ultimately causing a Denial of Service that affects all legitimate clients. Affected versions: Spring AI: 2.0.0

misp-stix

A path traversal vulnerability existed in the handling of MISP object template names during STIX 2 import and MISP-to-STIX 2 export. MISP object names are passed to PyMISP's object-template resolution mechanism, which constructs a filesystem path by joining the configured MISP object-template directory, the object name, and definition.json. An object name originating from untrusted STIX or MISP content was not sufficiently restricted before being used in this filesystem path. An attacker able to supply a crafted object name containing path separators or traversal sequences such as ../ could therefore cause template resolution to escape the expected template directory and attempt to load a definition.json file from another location accessible to the process. During STIX 2 import, an attacker-controlled x_misp_name from a custom STIX object could directly reach this template-resolution mechanism. The issue could also become persistent. A malicious object name stored in a MISP event could later be processed again during STIX 2 export. Consequently, content originally introduced in one security context could trigger filesystem access later when the event is exported by a process operating with different or greater privileges. If a suitable definition.json file exists outside the intended template directory, its contents may be interpreted as a MISP object template and fields from that file copied into the converted object. This can result in unintended disclosure of locally accessible data represented by the template file and modification of the resulting object's metadata or semantics. The patches introduce strict validation of object-template names. Valid names are restricted to a single path component containing letters, digits, hyphens, or underscores. Names that do not meet these requirements are replaced with the generic unknown-template name before reaching PyMISP template resolution. The original rejected name is preserved in the object's comment and a warning is generated, preventing traversal while retaining the source information.

Apache Software Foundation Apache InLong · Apache inlong

Improper Neutralization of Argument Delimiters in a Command ('Argument Injection') vulnerability in Apache InLong. Agent Installer's ModuleManager executes arbitrary shell commands via ExcuteLinux.exeCmd() with no filtering or whitelist validation. This issue affects Apache InLong: from 2.0.0 before 2.4.0. Users are advised to upgrade to Apache InLong's 2.4.0 or cherry-pick [1]/[2] to solve it. [1]  https://github.com/apache/inlong/pull/12151 . [2]  https://github.com/apache/inlong/pull/12155 .

risesoft-y9 Digital-Infrastructure

Risesoft Digital-Infrastructure 9.6.5 through 9.6.11 contains a path traversal vulnerability in the fileManager Y9FileController.retrieveFileStream handler that allows unauthenticated attackers to read arbitrary files by supplying parent-directory segments in the fullPath and fileName parameters. Attackers can request the unauthenticated /rest/retrieveFileStream endpoint to retrieve files like application.yml, exposing database, Redis and Nacos credentials.

Mitsubishi Electric Corporation GENESIS · Mitsubishi Electric Iconics Digital Solutions GENESIS · Mitsubishi Electric Corporation GENESIS64 · Mitsubishi Electric Iconics Digital Solutions GENESIS64

Weak Password Recovery Mechanism for Forgotten Password vulnerability in Mitsubishi Electric GENESIS versions 11.03 and prior, GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, IoTWorX 10.97.3 and prior, MC Works64 all versions, GENESIS32 all versions, BizViz all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS versions 11.03 and prior, GENESIS64 versions 10.97.3 and prior, ICONICS Suite versions 10.97.3 and prior, Hyper Historian versions 10.97.3 and prior, AnalytiX versions 10.97.3 and prior, MobileHMI 10.97.3 and prior, IoTWorX 10.97.3 and prior, GENESIS32 all versions, and BizViz all versions allows an authenticated local user with administrative privileges to unlock the system by tampering with the management file that stores the challenge response. Administrators are able to read and write the management file. But the management file is protected by Windows. As a result, the attacker may disclose, tamper with, destroy, or delete internal information, or cause the affected system to enter a denial-of-service (DoS) condition.