Samedi 3 octobre 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject beacons with bad HE operation The HE operation element not only needs to be longer than the fixed part, but also have an appropriate size for the variable part inside of it. Check this.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result() It was recently reported that rtw_fw_adaptivity_result() in fw.c dereferences rtwdev->chip->edcca_th without a NULL check. The issue is that devices with the 8821CE chip don't define edcca_th in their chip info. As a result, when rtw_fw_adaptivity_result() tries to dereference it, the kernel triggers an oops. Add a NULL check for edcca_th before dereferencing it in rtw_fw_adaptivity_result() in fw.c. Placing the check at the function entry avoids logging any garbage values. This change does not address the root cause for this behavior, but it prevents the NULL dereference and the resulting oops while a more permanent solution is developed. Tested on a 8822CE chip which defines edcca_th, so this issue is not present on it, but it still uses this driver and I can verify there are no regressions.

Linux

In the Linux kernel, the following vulnerability has been resolved: spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM The runtime PM functions had incomplete error handling that could leave the system in an inconsistent state. If any operation failed midway through suspend or resume, some resources would be left in the wrong state while others were already changed, leading to potential clock/power imbalances. Reorder the suspend/resume sequences to avoid brownout risk by ensuring the performance state is set appropriately before clocks are enabled and clocks are disabled before dropping the performance state. Fix by adding proper error checking for all operations and using goto-based cleanup to ensure all successfully acquired resources are properly released on any error.

Linux

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Release request if tb_cfg_request() fails in __tb_xdomain_response() If tb_cfg_request() fails setting up the request (for example the control channel is shut down already) it returns an error without calling the callback. To avoid leaking that memory, call tb_cfg_request_put() if tb_cfg_request() fails.

Linux

In the Linux kernel, the following vulnerability has been resolved: media: dm1105: fix missing error check for dma_alloc_coherent The return value of dm1105_dma_map(), which handles DMA memory allocation, is ignored in dm1105_hw_init(). If dma_alloc_coherent() fails, the driver will proceed using a NULL pointer for DMA transfers, leading to a kernel oops or invalid hardware access. Fix this by checking the return value and propagating -ENOMEM on failure.

Linux

In the Linux kernel, the following vulnerability has been resolved: crypto: ixp4xx - fix buffer chain unwind on allocation failure chainup_buffers() builds a linked list of buffer descriptors for a scatterlist. If dma_pool_alloc() fails while constructing the list, the current code sets buf to NULL and later dereferences it unconditionally at the end of the function: buf->next = NULL; buf->phys_next = 0; This can lead to a null-pointer dereference on allocation failure. If the failure happens after part of the descriptor chain has already been allocated and DMA-mapped, the partially constructed chain also needs to be released. Fix this by terminating the partially constructed chain on allocation failure and letting the callers unwind it via their existing cleanup paths. Also fix ablk_perform() to preserve the hook pointers before checking for failure, so partially built chains can be freed correctly.

Linux

In the Linux kernel, the following vulnerability has been resolved: mmc: davinci: avoid NULL deref of host->data in IRQ handler mmc_davinci_irq() returns early only when both host->cmd and host->data are NULL: if (host->cmd == NULL && host->data == NULL) { ... return IRQ_NONE; } So we may legitimately reach the rest of the handler with host->data == NULL (and therefore data == NULL). The DATDNE branch already guards against this with an explicit "if (data != NULL)" check, but the subsequent TOUTRD ("read data timeout") and CRCWR/CRCRD ("data CRC error") branches dereference data unconditionally: if (qstatus & MMCST0_TOUTRD) { data->error = -ETIMEDOUT; <-- NULL deref ... davinci_abort_data(host, data); } if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) { data->error = -EILSEQ; <-- NULL deref ... } If either bit is set in qstatus while host->data is NULL, the kernel will crash inside the IRQ handler. smatch flags this: drivers/mmc/host/davinci_mmc.c:933 mmc_davinci_irq() error: we previously assumed 'data' could be null (see line 914) Gate both branches on a non-NULL data, matching the existing pattern used by the DATDNE branch. No functional change for callers where data is non-NULL, which is the only case in which these branches did meaningful work before this change.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: phy: check length before parsing PHY status IE Hardware might report PHY status IE with unexpected length, and parser might access out of range. Check the length ahead.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds on allocate_doorbell allocated_doorbell has an option to set the doorbell id to a specific value (used by CRIU). This value was not bounds checked. Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS.

Linux

In the Linux kernel, the following vulnerability has been resolved: net/rds: Don't sleep inside rds_ib_conn_path_shutdown New rds rdma self tests exposed a hang when tearing down the ib network configs. This is caused by the shutdown worker thread sleeping on the wait_event call, which blocks other work items in the queue. Fix this by changing wait_event to wait_event timeout, and looping until the wait check succeeds.

Linux

In the Linux kernel, the following vulnerability has been resolved: affs: handle set_blocksize failures affs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

Linux

In the Linux kernel, the following vulnerability has been resolved: bfs: handle set_blocksize failures bfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

Linux

In the Linux kernel, the following vulnerability has been resolved: qnx4: handle set_blocksize failures qnx4 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

Linux

In the Linux kernel, the following vulnerability has been resolved: jfs: handle set_blocksize failures jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

Linux

In the Linux kernel, the following vulnerability has been resolved: hpfs: handle set_blocksize failures hpfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

Linux

In the Linux kernel, the following vulnerability has been resolved: omfs: handle set_blocksize failures omfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

Linux

In the Linux kernel, the following vulnerability has been resolved: usbip: vhci_hcd: fix NULL deref in status_show_vhci platform_get_drvdata() can return NULL if a VHCI host controller's probe failed (e.g. due to USB bus number exhaustion). status_show_vhci() checked for a NULL pdev but not for a NULL hcd returned by platform_get_drvdata(). Passing NULL to hcd_to_vhci_hcd() does not return NULL - it returns a pointer offset of 0x260, causing a NULL pointer dereference when that value is subsequently dereferenced. Add a NULL check on hcd before calling hcd_to_vhci_hcd(). Move status_show_not_ready() above status_show_vhci() to make it callable from the new error path without a forward declaration.

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: core: hcd: fix possible deadlock in rh control transfers >From within the SCSI error handler memory allocations must not trigger IO. Handling errors in UAS and the storage driver may involve resetting a device. The thread doing the reset itself relies on VM magic. However, that is insufficient, as resetting a device involves resuming it. Resumption as well as resetting involves conrol transfers to the parent of the device to be reset. That may be a root hub. Hence usbcore must heed the flags passed to usb_submit_urb() processing control transfers to root hubs. The problem exist since the storage driver has been merged.

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: goku_udc: avoid NULL deref of dev->driver in INT_USBRESET log goku_irq() handles a number of bus events under a single ep0 path. It already guards the gadget driver suspend/resume callbacks against a NULL ->driver: if (dev->gadget.speed != USB_SPEED_UNKNOWN && dev->driver && dev->driver->resume) { spin_unlock(&dev->lock); dev->driver->resume(&dev->gadget); ... } but the very next branch unconditionally dereferences dev->driver when an INT_USBRESET arrives: if (stat & INT_USBRESET) { ACK(INT_USBRESET); INFO(dev, "USB reset done, gadget %s\n", dev->driver->driver.name); } If the controller raises INT_USBRESET before any gadget driver has been bound (or after one has been unbound), dev->driver is NULL and the printk dereferences NULL. smatch flags the inconsistency: drivers/usb/gadget/udc/goku_udc.c:1618 goku_irq() error: we previously assumed 'dev->driver' could be null (see line 1607) Fall back to a placeholder when the gadget driver is not bound. No functional change while a gadget driver is bound.

Linux

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: fix possible ISR soft lockup There are rare cases in which the host gets stuck in the ISR because it is flooded with messages during the startup phase. The reason for the soft lockup in the ISR is the missing FIFO error IRQ (FIFOE) handling. Not handling it and reporting IRQ_HANDLED triggers the IRQ immediately again. Fix this by adding a check for the FIFOE status and clearing the FIFO if no data is ready (DR). This behavior was observed on an AM62L device which uses the OMAP 8250 driver. Fix it for all 8250 drivers, since the OMAP driver's special IRQ setup handling may trigger this behavior more frequently, but it is not ensured that other 8250 drivers aren't affected.

Linux

In the Linux kernel, the following vulnerability has been resolved: rds: filter RDS_INFO_* getsockopt by caller's netns The RDS_INFO_* family of getsockopt(2) options reads several file-scope global lists that are not per-netns: rds_sock_info / rds6_sock_info, rds_sock_inc_info / rds6_sock_inc_info -> rds_sock_list rds_tcp_tc_info / rds6_tcp_tc_info -> rds_tcp_tc_list rds_conn_info / rds6_conn_info, rds_conn_message_info_cmn (for the *_SEND_MESSAGES and *_RETRANS_MESSAGES variants), rds_for_each_conn_info (for RDS_INFO_IB_CONNECTIONS) -> rds_conn_hash[] The handlers do not filter by the caller's network namespace. rds_info_getsockopt() has no netns or capable() check, and rds_create() has no capable() check, so AF_RDS is reachable from an unprivileged user namespace. As a result, an unprivileged caller in a fresh user_ns plus netns can read the bound address and sock inode of every RDS socket on the host, the peer address of incoming messages on every RDS socket on the host, the peer address and TCP sequence numbers of every rds-tcp connection on the host, and the peer address and RDS sequence numbers of every RDS connection on the host. The rds-tcp transport is reachable from a non-initial netns (see rds_set_transport()), so a one-shot init_net gate at rds_info_getsockopt() would deny legitimate per-netns visibility to rds-tcp callers. Instead, filter at each handler by comparing the netns of the caller's socket to the netns of the list entry, or to rds_conn_net(conn) for connection paths. Only copy entries whose netns matches the caller. Counters (RDS_INFO_COUNTERS) are aggregate statistics and remain global. Reproducer (KASAN VM, rds and rds_tcp loaded): an AF_RDS socket binds 127.0.0.1:4242 in init_net as root. A child process enters a fresh user_ns plus netns and opens AF_RDS there, then calls getsockopt(SOL_RDS, RDS_INFO_SOCKETS). Before this change, the child sees the init_net socket. After this change, the child sees zero entries. Drop the rds_sock_count, rds_tcp_tc_count, and rds6_tcp_tc_count globals. v2 used them for the size precheck and lens->nr; v3 replaced the precheck with a per-ns count from a first pass over the list, so the globals have no remaining readers. The matching increments and decrements in rds_create()/rds_destroy_sock() and rds_tcp_set_callbacks()/rds_tcp_restore_callbacks() go away with them. Reported by the kernel test robot under clang W=1.

Linux

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tegra/soctherma: Switch to devm cooling device registration Use devm_thermal_of_cooling_device_register() to simplify resource management and avoid manual cleanup in error paths. As a side effect this change has the benefit of solving an existing issue. Before, the function tegra_soctherm_remove() only called debugfs_remove_recursive() and never called thermal_cooling_device_unregister() for any of the cooling devices registered here. After the driver removal, the thermal framework's cdev list would still hold references to thermal_cooling_device objects whose devdata pointer (ts) pointed to memory already freed by the platform device's devm cleanup. With this change, the cooling device is unregistered when the driver is removed, thus fixing the issue above.

Linux

In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: fix temp address generation after prefix deprecation When a router temporarily deprecates an IPv6 prefix (either by sending a Router Advertisement with Preferred Lifetime = 0 or by letting the lifetime expire) and later restores it, the kernel permanently loses its ability to generate temporary privacy addresses (RFC 8981) for that prefix. This happens because the address worker attempts to generate a replacement temporary address when the current one nears expiration. As the base prefix is deprecated already, the generation fails after marking the temporary address as already having spawned a replacement (ifp->regen_count++). When the router eventually restores the prefix, the temporary address becomes active again. However, once it naturally expires, the address worker sees this temporary address already tried to generate one and skips the regeneration. Fix the issue by resetting the regen_count check of the latest temp address generated for the prefix updated by the incoming RA.

Linux

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix condition check in acpi_ps_parse_loop() Fix condition check for AML_ELSE_OP in acpi_ps_parse_loop() to prevent out-of-bounds access.

Linux

In the Linux kernel, the following vulnerability has been resolved: ACPICA: validate byte_count in acpi_ps_get_next_package_length() Validate package length reading in acpi_ps_get_next_package_length().

Linux

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add package limit checks in parser functions Add package limit checks in parser functions to prevent out-of-bounds access.

Linux

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix NULL pointer dereference in acpi_ns_custom_package() acpi_ns_custom_package() unconditionally dereferences the first element of the package to read the _BIX version number, without checking for NULL: if ((*Elements)->Common.Type != ACPI_TYPE_INTEGER) When firmware returns a _BIX package whose first element is an unresolvable reference, ACPICA evaluates that entry to NULL. acpi_ns_remove_null_elements() does not strip NULL entries for ACPI_PTYPE_CUSTOM packages (fixed-position format would break if elements were shifted), so acpi_ns_custom_package() sees the NULL and causes a crash. Add a NULL check for the first element (version field) before dereferencing it. The caller then receives AE_AML_OPERAND_TYPE instead of crashing.

Linux

In the Linux kernel, the following vulnerability has been resolved: ata: ahci: fail probe if BAR too small for claimed ports When an AHCI controller is disabled in BIOS, its HOST_CAP register may contain a bogus value, e.g. 0xFFFFFFFF. Since CAP.NP (Number of Ports) is a zeroes based 5-bit register field, a value of 0x1f means 32 ports. If CAP.NP claims more ports than can physically fit within the mapped BAR region, accessing port registers beyond the BAR boundary causes a kernel panic. Add validation in ahci_init_one() to check that the BAR size is sufficient for the number of ports claimed in CAP.NP. The check calculates the required MMIO size as: required_size = 0x100 (global registers) + max_ports * 0x80 If required_size exceeds the actual BAR size, the probe fails with -ENODEV, preventing the panic and providing a clear error message. [cassel: commit log]

Linux

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix node refcount leak on ctrl packet alloc failure qrtr_send_resume_tx() calls qrtr_node_lookup() which takes a reference on the returned node. If the subsequent call to qrtr_alloc_ctrl_packet() fails due to memory allocation failure, the function returns -ENOMEM without calling qrtr_node_release() to release the node reference. Add qrtr_node_release(node) before returning on the allocation failure path to properly release the reference.

Linux

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: preserve non-DOS attribute bits in system.dos_attrib [BUG] A corrupted ntfs3 image can hit a NULL function pointer call in generic_perform_write() after toggling system.ntfs_attrib and then overwriting system.dos_attrib on the same file. BUG: kernel NULL pointer dereference, address: 0000000000000000 \#PF: supervisor instruction fetch in kernel mode \#PF: error_code(0x0010) - not-present page PGD bed5067 P4D bed5067 PUD 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffff88801025f988 EFLAGS: 00010246 Call Trace: generic_perform_write+0x409/0x8c0 mm/filemap.c:4255 __generic_file_write_iter+0x1bb/0x200 mm/filemap.c:4372 ntfs_file_write_iter+0xcd9/0x1c20 fs/ntfs3/file.c:1253 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x63b/0xf70 fs/read_write.c:686 ksys_write+0x133/0x250 fs/read_write.c:738 __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x77/0xc0 fs/read_write.c:746 ... [CAUSE] system.ntfs_attrib updates ATTR_DATA flags via ni_new_attr_flags() and switches i_mapping->a_ops to ntfs_aops_cmpr when FILE_ATTRIBUTE_COMPRESSED is set. system.dos_attrib then overwrites ni->std_fa from a one-byte DOS attribute value, clearing the compression bit without updating ATTR_DATA or the mapping operations. Old buffered writes use is_compressed(ni) to choose __generic_file_write_iter(). That leaves generic_perform_write() calling a NULL write_begin callback from ntfs_aops_cmpr. [FIX] Treat system.dos_attrib as a low-byte DOS attribute update and preserve the existing non-DOS attribute bits in ni->std_fa. This keeps compressed and sparse state consistent with ATTR_DATA and the mapping operations while keeping the existing DOS attribute semantics intact.

Linux

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: rework FDB management on the bridge leave path On bridge leave, the dpaa2_switch_port_set_fdb() function always allocates a new FDB for the port which is becoming standalone. In case no FDB is found, then the port leaving a bridge will continue to use the current one. The above logic does not cover the case in which there are multiple bridges which have ports from the same DPSW instance. In this case, when the last port leaves bridge #1, it finds an unused FDB to switch to, but the old FDB is not marked as unused. Since the number of FDBs is equal to the number of DPSW interfaces, this will eventually lead to multiple ports sharing the same FDB. Fix this by changing how we are managing the FDBs on the leave path. Instead of directly allocating a new FDB, first verify if the current port is the last one to leave a bridge. If this is the case, then continue to use the current FDB and only allocate another FDB if there are other ports remaining in the bridge.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: flower: reject cross-chip redirect dsa_port_from_netdev() may return a valid port from a different switch chip. Programming another chip's port index into the local hardware causes redirection to the wrong port, or an out-of-bounds access if the index exceeds the local chip's port count. Apply a minimal fix that adds a check to catch this case and adjusts the extack message. When cls->common.skip_sw is not set, the operation could instead redirect to the upstream port and let the software or upstream switch(es) handle the forward, but that is not addressed here.

Linux

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: fix handling of NAPI on the remove path All the NAPI instances for a DPSW device are attached to the first switch port's net_device but shared by all ports. The NAPI instances get disabled only once the last port goes down. This causes an issue on the .remove() path where each port is unregistered and freed one at a time, causing the NAPI instances to be deleted even though they are not disabled. In order to avoid this, split up the unregister_netdev() calls from the free_netdev() so that we make sure all ports go down before we attempt a deletion of NAPI instances. Also, make the netif_napi_del() explicit as it is on the .probe() path.

Linux

In the Linux kernel, the following vulnerability has been resolved: xhci: Prevent queuing new commands if xhci is inaccessible Refuse to queue a new command on the command ring if xHC is marked inaccessible with the HCD_FLAG_HW_ACCESSIBLE. HCD_FLAG_HW_ACCESSIBLE is set and cleared in suspend and resume. Also print a warning if xhci is being suspended with commands still pending on the command ring.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: bound pp_dpm_set_pp_table() memcpy The powerplay path allocates hardcode_pp_table once with kmemdup(..., soft_pp_table_size). memcpy(..., size) used the sysfs store count (up to PAGE_SIZE) with no upper bound, causing heap overflow. Reject writes where size exceeds soft_pp_table_size.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix buffer overflow during vBIOS update Clamp the buffer postion to write by setting the bin attribute to the maximum buffer size so that VFS layer will block the out-of-bounds accessing.

Linux

In the Linux kernel, the following vulnerability has been resolved: bpf: NUL-terminate replaced sysctl value When writing to sysctls, proc_sys_call_handler() guarantees that the buffer passed to proc handlers is NUL-terminated. If bpf_sysctl_set_new_value() replaces the pending sysctl value, it can hand a replacement buffer directly to proc handlers. However, the helper currently copies only buf_len bytes into that buffer without appending a NUL terminator, leaving downstream parsers vulnerable to out-of-bounds access. Fix this by appending a '\0' after the replaced value to restore the expected sysctl semantics. Since the helper already rejects buf_len greater than PAGE_SIZE - 1, there is always room for the extra byte. Reproduced in a QEMU x86_64 guest booted with KASAN while exercising the sysctl replacement path with a cgroup/sysctl BPF program. The reproducer targets `/proc/sys/net/core/flow_limit_cpu_bitmap`, fills the original user write buffer with non-zero bytes, and overrides the sysctl value so the replacement buffer lacks a terminating NUL. Under that setup, the pre-fix kernel reported: BUG: KASAN: slab-out-of-bounds in strnchrnul+0x72/0x90 Read of size 1 at addr ffff88800de57000 by task repro_patch3/66 CPU: 0 UID: 0 PID: 66 Comm: repro_patch3 Not tainted 7.1.0-rc3-00269-g8370ca1f87cc #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcb/0x5e0 ? __virt_addr_valid+0x21d/0x3f0 ? strnchrnul+0x72/0x90 ? strnchrnul+0x72/0x90 kasan_report+0xca/0x100 ? strnchrnul+0x72/0x90 strnchrnul+0x72/0x90 bitmap_parse+0x37/0x2e0 flow_limit_cpu_sysctl+0xc6/0x840 ? __pfx_flow_limit_cpu_sysctl+0x10/0x10 ? __kvmalloc_node_noprof+0x5ba/0x870 proc_sys_call_handler+0x31d/0x480 ? __pfx_proc_sys_call_handler+0x10/0x10 ? selinux_file_permission+0x39f/0x500 ? lock_is_held_type+0x9e/0x120 vfs_write+0x98e/0x1000 ... </TASK> The buggy address is located 0 bytes to the right of allocated 4096-byte region [ffff88800de56000, ffff88800de57000) With this fix applied, rerunning the same sysctl-targeted path yields no corresponding KASAN reports.

Linux

In the Linux kernel, the following vulnerability has been resolved: hsr: broadcast netlink notifications in the device's net namespace The HSR generic netlink family sets .netnsok = true. HSR devices can live in network namespaces other than init_net. Two async notifiers broadcast events with genlmsg_multicast(). They are hsr_nl_ringerror() and hsr_nl_nodedown(). That helper delivers only on the default genl socket in init_net. So the events always land in init_net. The network namespace of the device does not matter. This has two effects. A listener in the device's own namespace never sees its own ring error and node down events. A privileged listener in init_net receives events from HSR devices in other namespaces. The payload carries the peer node MAC (HSR_A_NODE_ADDR) and the slave port ifindex (HSR_A_IFINDEX). Switch both callers to genlmsg_multicast_netns(). Other families with .netnsok = true already do this. Examples are gtp, ovpn, team, batman-adv, netdev-genl, ethtool and handshake. hsr_nl_ringerror() already has the slave port. It uses dev_net(port->dev). hsr_nl_nodedown() takes the namespace from the master port via hsr_port_get_hsr().

Linux

In the Linux kernel, the following vulnerability has been resolved: ALSA: es18xx: check control allocation before private data setup snd_es18xx_mixer() creates controls with snd_ctl_new1() and then stores bookkeeping pointers or sets private_free before calling snd_ctl_add(). snd_ctl_new1() can return NULL on allocation failure, so those writes can dereference a NULL control pointer. Check the returned control pointers before using them and return -ENOMEM on allocation failure.

Linux

In the Linux kernel, the following vulnerability has been resolved: btrfs: balance: fix potential bg lookup failure in btrfs_may_alloc_data_chunk() [BUG] Running btrfs balance can trigger a null-ptr-deref before relocating a data chunk when metadata corruption leaves a chunk in the chunk tree without a corresponding block group in the in-memory cache: KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] RIP: 0010:btrfs_may_alloc_data_chunk+0x40/0x1c0 fs/btrfs/volumes.c:3601 Call Trace: __btrfs_balance fs/btrfs/volumes.c:4217 [inline] btrfs_balance+0x2516/0x42b0 fs/btrfs/volumes.c:4604 btrfs_ioctl_balance fs/btrfs/ioctl.c:3577 [inline] btrfs_ioctl+0x25cf/0x5b90 fs/btrfs/ioctl.c:5313 ... [CAUSE] __btrfs_balance() iterates the on-disk chunk tree and passes the chunk logical bytenr to btrfs_may_alloc_data_chunk() before relocating a data chunk. That helper then queries the in-memory block group cache: cache = btrfs_lookup_block_group(fs_info, chunk_offset); chunk_type = cache->flags; /* cache may be NULL */ A corrupt image can contain a chunk item whose matching block group item is missing, so no block group is ever inserted into the cache. In that case btrfs_lookup_block_group() returns NULL. The code only guards this with ASSERT(cache), which becomes a no-op when CONFIG_BTRFS_ASSERT is disabled. The subsequent dereference of cache->flags therefore crashes the kernel. [FIX] Add a NULL check after btrfs_lookup_block_group() in btrfs_may_alloc_data_chunk() and print and error message for clarity.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ibm: emac: mal: fix potential system hang in mal_remove() napi_disable() is not idempotent and calling it on an already-disabled or unenabled NAPI context will cause the kernel to spin indefinitely waiting for the NAPI_STATE_SCHED bit to clear. In mal_remove(), napi_disable() is called unconditionally. If no MACs were registered, NAPI was never enabled. Also, if they were registered but subsequently unregistered, NAPI was already disabled in mal_unregister_commac(). In either case, calling napi_disable() causes the kernel to hang upon module removal. Fix this by only calling napi_disable() in mal_remove() if the commac list is not empty (which implies NAPI is enabled).

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate connectionless PSM length Connectionless L2CAP frames carry a two-byte PSM at the start of the payload. l2cap_recv_frame() currently reads that PSM unconditionally after validating only the outer L2CAP length. A malformed connectionless frame with a zero- or one-byte payload can therefore make the parser read beyond the advertised skb payload and use tailroom bytes as part of the PSM. A VHCI-backed QEMU reproducer injected a one-byte connectionless payload and reached the unchecked read. Reject connectionless frames that cannot contain the PSM before reading or pulling it. This preserves all valid connectionless frames while dropping only structurally incomplete packets.

Linux

In the Linux kernel, the following vulnerability has been resolved: ASoC: rockchip: rockchip_pdm: Handle runtime PM resume failures in set_fmt rockchip_pdm_set_fmt() calls pm_runtime_get_sync() before accessing hardware registers, but ignores its return value. If the runtime resume fails, the function continues to perform register accesses while the device state is undefined. Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() and return early on failure to avoid unpowered register accesses.

Linux

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix races in cifsd thread creation The cifsd demultiplex thread can run and access tcp_ses before the parent thread has finished populating tcp_ses, which the worker thread accesses locklessly. Also, the kthread_run macro may start the thread before returning the thread pointer. Because the pointer is part of the structure that the thread can access, if the kernel is preempted after the thread is spawned, but before the thread pointer is populated and the thread attempts to exit, it will sleep, waiting for a SIGKILL signal. Fix this by moving creation of the thread to after all of tcp_ses'es fields are populated, and spawning the thread last, using a split kthread_create/wake_up_process logic.

Linux

In the Linux kernel, the following vulnerability has been resolved: spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data() Prevent NULL pointer dereference when spi_get_device_id() returns NULL, which can happen when using driver_override without matching SPI ID entry.

Linux

In the Linux kernel, the following vulnerability has been resolved: tls: reject the combination of TLS and sockmap TLS and sockmap (BPF psock) integration hides a lot of latent bugs. Bugs which may be more or less relevant for real users but they are definitely exploitable. We could not find anyone actively using this integration so let's reject this config. Adding a TLS socket to a sockmap was already rejected by sk_psock_init() through the inet_csk_has_ulp() check. We need to reject the attempts to configure the TLS keys (rather than adding the ULP itself) because checking prior to the ULP installation is tricky without risking a race with sockmap getting added in parallel (sockmap does not hold the socket lock). This patch is a minimal rejection of the feature. Subsequent patch in the series will do a light dead code removal. Full cleanup would require a major rewrite of the Tx path, we don't need skmsg any more.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl amdkfd driver needs allocate buffer to return bo metadata to user space. The buffer size is controlled by user currently. It is a potential security issue that hostile value (e.g. 2 GiB) lets any render-group user trigger order-MAX allocation/OOM in kernel context. This patch first finds bo metadata size. If the size is smaller than user provided value drive can safely allocate buffer in kernel space and copy to user space buffer. If not, driver will let user know, not allocate and copy. User will redo with new buffer in user space. This patch lets driver decide buffer allocation size to avoid potential hostile size from user space. (cherry picked from commit f54ce9e8cbd3abe0eda3a285f54dc4f572fe589a)

Linux

In the Linux kernel, the following vulnerability has been resolved: PCI: iproc: Protect root bus removal with rescan lock Hold the pci_rescan_remove_lock lock while stopping and removing a root bus to avoid racing with concurrent rescan or hotplug operations triggered via sysfs. Such races may lead to use-after-free issues or system crashes. [bhelgaas: commit log]

Linux

In the Linux kernel, the following vulnerability has been resolved: PCI: altera: Protect root bus removal with rescan lock Hold the pci_rescan_remove_lock lock while stopping and removing a root bus to avoid racing with concurrent rescan or hotplug operations triggered via sysfs. Such races may lead to use-after-free issues or system crashes. [bhelgaas: commit log]

Linux

In the Linux kernel, the following vulnerability has been resolved: PCI: rockchip: Protect root bus removal with rescan lock Hold the pci_rescan_remove_lock lock while stopping and removing a root bus to avoid racing with concurrent rescan or hotplug operations triggered via sysfs. Such races may lead to use-after-free issues or system crashes. [bhelgaas: commit log]

Linux

In the Linux kernel, the following vulnerability has been resolved: PCI: mediatek: Protect root bus removal with rescan lock Hold the pci_rescan_remove_lock lock while stopping and removing a root bus to avoid racing with concurrent rescan or hotplug operations triggered via sysfs. Such races may lead to use-after-free issues or system crashes. [bhelgaas: commit log]

Linux

In the Linux kernel, the following vulnerability has been resolved: net: au1000: move free_irq out of the close-time spinlocked section au1000_close() calls free_irq() while aup->lock is still held with spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ descriptor request mutex, so it does not belong inside the close-time spinlocked section. This was found by our static analysis tool and then confirmed by manual review of the in-tree au1000_close() .ndo_stop path. The reviewed path keeps aup->lock held across the MAC reset, queue stop and free_irq(dev->irq, dev). A directed runtime validation kept that ndo_stop carrier and the same free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported "BUG: sleeping function called from invalid context" and "Invalid wait context" while free_irq() was taking desc->request_mutex, with au1000_close() and free_irq() on the stack. Drop aup->lock before freeing the IRQ. The protected close-time work still stops the device and queue before IRQ teardown, but the sleepable IRQ core path now runs outside the spinlocked section.

Linux

In the Linux kernel, the following vulnerability has been resolved: spi: core: Abort active target transfer on controller suspend When an SPI controller operating in target mode has a transfer in progress at the time of system suspend, the suspend path proceeds without aborting the ongoing transfer. This can leave the hardware in an inconsistent state, potentially causing the system to hang or fail to resume cleanly. Fix this by invoking the controller's target_abort callback from spi_controller_suspend() when the controller is in target mode and the callback is registered. This ensures any active target transfer is cleanly terminated before the controller is suspended.

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr ndr_encode_v4_ntacl() allocates sd_ndr.data via kzalloc() at entry. If any subsequent ndr_write_*() call returns error during encoding, the allocated sd_ndr.data won't be freed and causes memory leak. Move kfree(sd_ndr.data) into out label to ensure the buffer gets released on all success and error return paths.

Linux

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix acl.sd_buf memory leak and invalid sd_size error handling 1. When ndr_decode_v4_ntacl() fails, the code jumped to free_n_data which only freed n.data, skipping kfree(acl.sd_buf) and leaking the buffer. Zero-initialize struct xattr_ntacl acl, reorder error labels to out_free to release acl.sd_buf on all error paths. 2. if (acl.sd_size < sizeof(struct smb_ntsd)) is true, original code returned success without freeing sd_buf and left stale *pntsd. Set rc = -EINVAL before jumping to out_free to return error code and free buffer.

Linux

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: caiaq: validate EP1 reply lengths usb_ep1_command_reply_dispatch() uses buf[0] as a command byte and then reads command-specific fixed items from the same URB buffer. Several paths use buf + 1, buf[1], buf[2], or buf + 3 without first proving that urb->actual_length contains those bytes. Add per-command length checks, use a payload length derived from the bytes after the command byte for the control-state copy, and reject short analog input payloads before the input helper reads fixed offsets from the EP1 reply.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: avoid reading TKIP MIC keys for non-TKIP ciphers rsi_hal_load_key() copies tx_mic_key and rx_mic_key from data[16] and data[24] whenever key data is present. Those offsets are only part of the 32-byte TKIP key layout. Shorter keys used by other ciphers, such as CCMP, do not provide those bytes, so the unconditional copies can read past the supplied key buffer. Only copy the MIC keys for TKIP, and reject malformed TKIP keys that are shorter than the expected 32-byte layout. [drop useless length check]

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate rx/tx MLME callback frame lengths before access cfg80211_rx_mlme_mgmt() and cfg80211_tx_mlme_mgmt() call tracepoints before rejecting frames shorter than the frame-control field. After that, they only require len >= 2 before dispatching into subtype handlers that assume their fixed fields are present. The frames that trip this are not shorter than 2 bytes; they are short relative to their subtype. mwifiex is a concrete in-tree example on the length side: mwifiex_process_mgmt_packet() only requires a 4-address ieee80211_hdr plus the 2-byte firmware length prefix before handing the frame to cfg80211_rx_mlme_mgmt(). After stripping the length prefix and removing addr4, pkt_len can be exactly 24: a bare 3-address management header with no reason-code body. The existing WARN_ON(len < 2) does not fire on such a frame, and cfg80211_process_deauth() then reads u.deauth.reason_code as a two-byte access starting at offset 24, immediately past the 24-byte buffer. Add a frame-control length gate, then validate each subtype's minimum frame size in an if/else-if chain that mirrors the dispatch logic. Trace only after the frame is known to be well-formed. Side effects of this change: - The WARN_ON(len < 2) is dropped. It only guarded the frame_control read, never the subtype fixed fields, and it does not fire on the frames that actually trigger the out-of-bounds read (which are >= 2). The len >= 2 check is kept as the guard before dereferencing frame_control, but without the warning: these are exported callbacks and a malformed frame from a driver should be dropped silently rather than backtraced. - cfg80211_tx_mlme_mgmt() previously routed every non-deauth subtype through disassociation handling; it now silently ignores unrecognised subtypes.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: fix key index receive bound checks libipw_rx() reads skb->data[hdrlen + 3] to extract the WEP key index in both the software-decrypt key selection path and the hardware-decrypted IV/ICV strip path. In both places the existing guard only checks skb->len >= hdrlen + 3, which proves bytes up to hdrlen + 2 but not the byte at hdrlen + 3. Require hdrlen + 4 bytes before reading that item in both paths. This is a local source-boundary check only; it does not change the key index semantics.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: validate beacon length before fixed buffer copy rsi_prepare_beacon() copies the mac80211 beacon frame after FRAME_DESC_SZ into a management skb whose usable tailroom may be smaller than MAX_MGMT_PKT_SIZE after alignment. Validate the beacon length against the actual tailroom before the copy and skb_put(). Leave ownership of the management skb with the caller on error, matching the existing rsi_send_beacon() cleanup path.

Linux

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol() If during relocation we fail in insert_dirty_subvol() because btrfs_update_reloc_root() returned an error, we will leave a root's reloc_root field pointing to a reloc root that was freed instead of NULL, resulting later in a use-after-free, or double free attempt during unmount. The sequence of steps is this: 1) During relocation the call to btrfs_update_reloc_root() in insert_dirty_subvol() fails, so insert_dirty_subvol() returns the error to merge_reloc_root() without adding the root to the list rc->dirty_subvol_roots; 2) Then merge_reloc_root() aborts the current transaction because insert_dirty_subvol() returned an error; 3) Up the call chain, merge_reloc_roots() gets the error, adds the reloc root for root X to the local reloc_roots list and jumps to the 'out' label, where it calls free_reloc_roots() to free all the reloc roots in the local reloc_roots list. This frees the reloc root for root X; 4) We go up the call chain to relocate_block_group() which calls clean_dirty_subvols() to go over dirty roots and set their ->reloc_root field to NULL, but root X is not in the dirty_subvol_roots list, so its ->reloc_root still points to a reloc root; 5) Relocation finishes, with an error and a transaction abort, but the ->reloc_root field for root X still points to the reloc root that was freed in step 3; 6) When unmounting the fs we end up calling: btrfs_free_fs_roots() btrfs_drop_and_free_fs_root() --> calls btrfs_put_root() against root X's ->reloc_root which is not NULL and points to the already freed reloc root in step 4 above Resulting in a use-after-free to a double free attempt. Syzbot reported this with the following dmesg/syslog: [ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5) [ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure [ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5 [ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction. [ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0 [ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure [ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly [ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure [ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1 [ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30 [ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30 [ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409 [ 106.682946][ T5338] ================================================================== [ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250 [ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338 [ 106.693173][ T5338] [ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) [ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 106.694300][ T5338] Call Trace: [ 106.694308][ T5338] <TASK> [ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150 [ 106.694331][ T5338] print_address_description+0x55/0x1e0 [ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250 [ 106.694358][ T5338] print_report+0x58/0x70 [ 106. ---truncated---

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix an off-by-1 boundary check Before looking at the 11th byte, check the length is big enough.

Linux

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix leaks and online flag on radix_tree_insert failure When radix_tree_insert() fails in blkg_create(), the error path has two issues: 1. blkg->online is set to true unconditionally, even when the blkg was never fully inserted. Move the assignment inside the success block. 2. The error path calls blkg_put() without first calling percpu_ref_kill(). Because the refcount is still in percpu mode, percpu_ref_put() only does this_cpu_sub() without checking for zero, so blkg_release() is never triggered. This permanently leaks the blkg memory, its percpu iostat, policy data, the parent blkg reference, and the cgroup css reference — the latter preventing the cgroup from ever being destroyed. Fix by replacing blkg_put() with percpu_ref_kill(), matching the pattern used in blkg_destroy().

Linux

In the Linux kernel, the following vulnerability has been resolved: smb/client: flush dirty data before punching a hole Punching a hole after a large buffered write may leave the range reported as data. Reproduce it with: xfs_io -f \ -c "pwrite -b 3m -S 0x61 0 3m" \ -c "fpunch 1m 1m" \ -c "seek -h 0" \ -c "seek -d 1m" \ /mnt/test/repro Punching 1 MiB at offset 1 MiB should produce: 0 1 MiB 2 MiB 3 MiB | DATA | HOLE | DATA | EOF Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF, and SEEK_DATA(1M) returns 1M. This happens because a dirty folio spanning the punched range can be written back after the punch and refill the hole. Fix this by flushing and waiting for dirty data in the punched range before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA. The xfstests generic/539 pass against Samba/ksmbd with this change.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix a possible underflow We shouldn't trust the firmware about the length of the wowlan packet.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: add a check on the tid coming from the firmware ba_notif->tid is a firmware-controlled u8 that is used directly as an array index into tid_data[] without any validation. Add a bounds check against IWL_MAX_TID_COUNT before dereferencing the array.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: bound aligned TLV advance in FW parser Validate ALIGN(tlv_len, 4) against remaining parser length before consuming bytes from the firmware image. This avoids length underflow on malformed TLVs.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: acpi: validate WGDS table revision index Check tbl_rev bounds before BIT(tbl_rev) to avoid undefined shifts when firmware reports an invalid revision value.

Linux

In the Linux kernel, the following vulnerability has been resolved: cifs: validate idmap key payload length The cifs.idmap key type stores its payload length in key->datalen, which is limited to U16_MAX. Accepting a larger key payload truncates the recorded length and can make later users interpret the payload using inconsistent bounds. Reject oversized preparsed payloads before allocating or copying them. This keeps key->datalen consistent with the stored data for both inline and separately allocated idmap payloads.

Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie() The KASAN allocation trace shows that a malformed IE buffer is stored via SIOCSIWGENIE (cfg80211_wext_siwgenie()) without any validation. The crash trace shows that a subsequent SIOCSIWESSID triggers a connection attempt which calls cfg80211_sme_get_conn_ies() to process the stored IE buffer, causing: - An out-of-bounds read in skip_ie() which reads ies[pos+1] (the length byte) past the end of the 1-byte buffer. - An integer underflow in the memcpy size argument when offs returned by ieee80211_ie_split() exceeds ies_len, causing unsigned subtraction to wrap to SIZE_MAX and triggering a fortify panic. Fix this by validating the IE buffer in cfg80211_wext_siwgenie() before storing it. [drop unnecessary ie_len check, update commit message]

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame rfcomm_recv_frame() casts skb->data to struct rfcomm_hdr and dereferences hdr->addr and hdr->ctrl without validating skb->len first. A truncated frame with skb->len less than the minimum header size causes an out-of-bounds read of uninitialized memory. Additionally, a zero-length frame causes skb->len-- to underflow to UINT_MAX, making skb_tail_pointer() read far past the buffer. Commit 23882b828c3c ("Bluetooth: RFCOMM: validate skb length in MCC handlers") fixed the same class of missing-length-check bugs in the MCC sub-handlers, but the top-level rfcomm_recv_frame() was left unfixed. KMSAN reports: BUG: KMSAN: uninit-value in rfcomm_run ... Uninit was created at: __alloc_skb+0x474/0xb60 vhci_write+0xe9/0x870 Fix this by rejecting frames smaller than sizeof(struct rfcomm_hdr) + 1 (the minimum frame must have a 3-byte header and a 1-byte FCS).

Linux

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Do not block on tag allocation in scsi_eh_lock_door() scsi_eh_lock_door() is called from scsi_restart_operations() while the host is still in the SHOST_RECOVERY state, i.e. before the host is switched back to SHOST_RUNNING and scsi_run_host_queues() restarts the queues. It allocates a request via scsi_alloc_request() with no flags, so blk_mq_get_tag() may block waiting for a free sched tag when all tags are already in use. Those tags can be held by commands that were just requeued by scsi_eh_flush_done_q() during error handling. Such commands cannot be dispatched until the host leaves SHOST_RECOVERY and scsi_run_host_queues() is called - which only happens *after* scsi_eh_lock_door() returns. This forms a circular dependency: - scsi_eh_lock_door(), running in the SCSI error handler thread, waits for a sched tag held by a requeued command; - the requeued command cannot complete and release its sched tag until the error handler thread leaves scsi_restart_operations() and restart the queues. For devices with a single driver tag (e.g. USB storage) it is a guaranteed deadlock and I/O that can never be submitted. This problem has also been reproduced in our environment. Locking the door is a best-effort operation, and scsi_eh_lock_door() already returns silently when the request allocation fails. Pass BLK_MQ_REQ_NOWAIT to scsi_alloc_request() so the allocation fails instead of blocking when no tag is available. This breaks the circular dependency and allows the error handler to finish restarting the queues, after which the pending commands are dispatched normally.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: appletalk: fix NULL pointer dereference in aarp_send_ddp() aarp_send_ddp() calls atalk_find_dev_addr(dev) in the LocalTalk fast path without checking for NULL. When the device has no AppleTalk interface configured (dev->atalk_ptr == NULL), this leads to a NULL pointer dereference at the at->s_net access. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:aarp_send_ddp (net/appletalk/aarp.c:552 (discriminator 2)) Call Trace: <TASK> atalk_sendmsg (net/appletalk/ddp.c:1715) __sys_sendto (net/socket.c:2265 (discriminator 1)) __x64_sys_sendto (net/socket.c:2272) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Add a NULL check consistent with the other callers of atalk_find_dev_addr().

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-78409. Reason: This candidate is a duplicate of CVE-2026-78409. Notes: All CVE users should reference CVE-2026-78409 instead of this candidate

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-78410. Reason: This candidate is a duplicate of CVE-2026-78410. Notes: All CVE users should reference CVE-2026-78410 instead of this candidate