Lundi 27 juillet 2026

Linux

In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due to a PMD check failure, the pgtable allocated earlier via pte_alloc_one() is never freed, causing a memory leak. Added free_abort label to release the pgtable in error path.

Linux

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabled kernel this trips an out-of-bounds report and panics; on stock kernels it silently reads adjacent slab data and, if that byte happens to be '\n', the following count-- wraps ssize_t 0 to -1 and is then passed to kmemdup_nul(). linedisp_display() is reached from the message_store() sysfs callback (drivers/auxdisplay/line-display.c message attribute, mode 0644) and from the in-tree initial-message setup with count == -1, so the OOB path is only userspace-triggerable via zero-byte writes; vfs_write() does not short-circuit on count == 0 and kernfs_fop_write_iter() dispatches the store callback regardless. Guard the trailing-newline trim with a count check. The existing if (!count) block then takes the clear-display path unchanged. Affects every auxdisplay driver that registers via linedisp_register() / linedisp_attach(): ht16k33, max6959, img-ascii-lcd, seg-led-gpio.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return.

Linux

In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length.

Linux

In the Linux kernel, the following vulnerability has been resolved: iio: adc: mt6359: fix unchecked return value in mt6358_read_imp In mt6358_read_imp(), the variable val_v is passed to regmap_read() but the return value is not checked. If the read fails, val_v remains uninitialized and its random stack content is subsequently reported as a measurement result. Initialize val_v to zero to ensure a predictable value is reported in case of bus failure and to prevent potential stack data leakage. This also satisfies static analyzers that might otherwise flag the variable as used uninitialized.

Linux

In the Linux kernel, the following vulnerability has been resolved: iio: adc: nxp-sar-adc: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero or a negative value to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. Also prevent unsigned integer underflow when the computed cycle count is smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to a huge value.

Linux

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: itg3200: fix i2c read into the wrong stack location itg3200_read_all_channels() takes `__be16 *buf' as a parameter and fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the parameter (a pointer), `&buf' is the address of the local pointer slot on the stack of itg3200_read_all_channels(), not the address of the caller's scan buffer. The (char *) cast hides the type mismatch. i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16) = 8 bytes into the parameter's stack slot, which is discarded when the function returns. The caller's scan buffer in itg3200_trigger_handler() is never written to, so iio_push_to_buffers_with_timestamp() pushes uninitialised stack contents to userspace via /dev/iio:deviceX every scan -- both a functional bug (no actual gyroscope or temperature data is delivered through the triggered buffer) and an information leak. The non-buffered read_raw() path is unaffected: it goes through itg3200_read_reg_s16() which uses `&out' on a local s16 value, where that is correct. Drop the spurious `&' so the i2c read writes into the caller's buffer.

Linux

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16260: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero to the sampling_frequency sysfs attribute triggers a division by zero in the kernel.

Linux

In the Linux kernel, the following vulnerability has been resolved: iio: chemical: mhz19b: reject oversized serial replies mhz19b_receive_buf() appends each serdev chunk into the fixed MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without checking that the chunk fits in the remaining space. A large callback can therefore overflow st->buf before the command path validates the reply. Reset the reply state before each command and reject oversized serial replies before copying them into the fixed buffer. When an oversized reply is detected, wake the waiter and report -EMSGSIZE instead of overwriting st->buf.

Linux

In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: fix division by zero in write_raw Add a zero check for val2 before using it as a divisor when setting the sampling frequency. A user writing a zero fractional part to the sampling_frequency sysfs attribute triggers a division by zero in the kernel.

Linux

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf() iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes, kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial kref to 1. It then calls dma_resv_add_fence() which takes a second reference (kref=2), and stores a raw pointer in block->fence. On the success path the function returns without calling dma_fence_put() to release the initial reference, so every buffer enqueue permanently leaks one kmalloc-128 allocation. The iio_buffer_cleanup() work item only releases the temporary reference taken during completion signalling by iio_buffer_signal_dmabuf_done(); the initial reference from dma_fence_init() is never released. With four iio_rwdev instances at 240kHz and 512 samples per buffer, this produces ~1875 kmalloc-128 allocations per second matching the observed slab growth exactly. A test with ftrace confirmed that the dma_fence_destroy event was never triggered. Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring ownership of the fence to the DMA reservation object. The DMA fence then gets properly discarded after being signalled.

Linux

In the Linux kernel, the following vulnerability has been resolved: USB: serial: omninet: fix memory corruption with small endpoint Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected.

Linux

In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=.

Linux

In the Linux kernel, the following vulnerability has been resolved: uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in probe(), but then calls kfree(udev) both on the probe() error path (label out_free) and again in remove(). Because devm_kzalloc() allocations are devres-managed and are freed automatically when the device is detached (including after a failing probe() and during driver unbind), the explicit kfree() can lead to a double free. If probe() fails after devm_kzalloc(), the error path frees udev and devres cleanup will free it again when the core unwinds the partially bound device. On normal driver removal, remove() frees udev and devres will free it again when the device is detached. This issue was identified by a static analysis tool I developed and confirmed by manual review. Fix by removing the manual kfree() calls and dropping the now-unused label.

Linux

In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: Fix use after free bug in vudc_remove due to race condition This patch follows up Zheng Wang's 2023 report of a use-after-free in vudc_remove(). The original thread stalled on Shuah Khan's request for runtime testing of the unplug/unbind path. This patch supplies that testing and keeps Zheng's original fix shape. In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer(). usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer(). vudc_remove() can then free the containing struct vudc while the timer is still pending or executing. KASAN confirms the race on an unpatched x86_64 QEMU guest with CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop that repeatedly writes a socket fd to usbip_sockfd, closes the socket pair, and unbinds/rebinds usbip-vudc.0: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0 Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239 Allocated by task 239: vudc_probe+0x4d/0xaa0 Freed by task 239: kfree+0x18f/0x520 device_release_driver_internal+0x388/0x540 unbind_store+0xd9/0x100 This lands in the timer core rather than v_timer() itself because the embedded timer_list is being walked after its containing struct vudc has already been freed. The underlying lifetime bug is the same one Zheng reported. With v_stop_timer() called from vudc_remove() and the timer deleted synchronously, the same harness completed 5000 bind/unbind iterations with no KASAN report.

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: check URB actual_length for interrupt-IN notifications USBTMC devices can use an optional interrupt endpoint for notification messages. These typically contain two-byte headers indicating the payload format, but the driver does not check if these headers are present before accessing the data buffers. In cases where the URB actual_length is not enough to fit these headers, the driver will either cause an out-of-bounds read, or consume stale leftover data from a previous notification. Fix by checking if actual_data contains enough bytes for the headers, otherwise resubmit URB to the interrupt endpoint.

Linux

In the Linux kernel, the following vulnerability has been resolved: USB: serial: belkin_sa: validate interrupt status length The Belkin interrupt callback treats interrupt data as a four-byte status report and reads LSR/MSR fields at offsets 2 and 3. The interrupt-in buffer length is derived from endpoint wMaxPacketSize, and short interrupt transfers may complete successfully with a smaller actual_length. Check the completed interrupt packet length before parsing status fields so short interrupt endpoints and short successful packets are ignored instead of causing out-of-bounds or stale status-byte reads. KASAN report as below: BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback() Read of size 1 Call trace: belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202) __usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630) dummy_timer() (?:?)

Linux

In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: validate interrupt packet headers cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() [ johan: use constants in header length sanity checks ]

Linux

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix memory corruption with small endpoints Add the missing bulk-out buffer size sanity checks to avoid out-of-bounds memory accesses or slab corruption should a malicious device report smaller buffers than expected.

Linux

In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan: fix missing indat transfer sanity check Add the missing sanity check on the size of usa49wg indat transfers to avoid parsing stale or uninitialised slab data.

Linux

In the Linux kernel, the following vulnerability has been resolved: USB: serial: mxuport: fix memory corruption with small endpoint Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size.

Linux

In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix memory corruption with small endpoint The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected.

Linux

In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix missing interrupt-in transfer sanity check Add the missing sanity check on the size of interrupt-in transfers to avoid parsing stale or uninitialised slab data (and leaking it to user space).

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling The WebUSB GET_URL handler in composite_setup() narrows landing_page_length to fit the host-supplied wLength using landing_page_length = w_length - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset; If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the unsigned subtraction wraps, and the subsequent memcpy(url_descriptor->URL, cdev->landing_page + landing_page_offset, landing_page_length - landing_page_offset); ends up copying close to UINT_MAX bytes from cdev->landing_page into cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the memcpy as a 4294967293-byte field-spanning write into url_descriptor->URL (size 252). A USB host can reach this from a single SETUP packet against any gadget that has webusb/use=1 and a landingPage configured. Handle the small-wLength case before the math: when the host requested fewer bytes than the URL descriptor header, only the header is meaningful and no URL bytes need to be copied. Setting landing_page_length to landing_page_offset makes the existing memcpy a no-op and leaves the descriptor returned to the host unchanged for all larger wLength values.

Linux

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: copy only received bytes on short ep0 read ffs_ep0_read() allocates its control-OUT data buffer with kmalloc() (not kzalloc) at the Length value from the Setup packet, then copies that full len to userspace regardless of how many bytes were actually received: data = kmalloc(len, GFP_KERNEL); ... ret = __ffs_ep0_queue_wait(ffs, data, len); if ((ret > 0) && (copy_to_user(buf, data, len))) ret = -EFAULT; __ffs_ep0_queue_wait() returns req->actual, which on a short control OUT transfer is strictly less than len. The copy_to_user() call still copies len bytes, so on a short OUT the last (len - ret) bytes of the kmalloc() buffer -- uninitialised slab residue -- are delivered to the FunctionFS daemon. Short ep0 OUT completions are specified USB control-transfer behavior and are produced by in-tree UDCs: * dwc2 continues on req->actual < req->length for ep0 DATA OUT (short-not-ok is the only ep0-OUT stall path). * aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket. * renesas_usbf logs "ep0 short packet" and completes the request. * dwc3 stalls on short IN but not on short OUT. A short ep0 OUT is therefore not evidence of a broken UDC; it is a normal condition f_fs has to cope with. The sibling gadgetfs implementation in drivers/usb/gadget/legacy/inode.c already does this correctly via min(len, dev->req->actual) before copy_to_user(). This patch brings f_fs.c to the same safe pattern rather than trimming at a defensive layer. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace. Linux host stacks normally reject short-wLength control OUTs before they reach the gadget, so reproducing this required a build that bypasses that host-side check. With the bypass in place, a 1-byte payload on a 64-byte Setup produces 63 bytes of non-canary slab residue in the daemon's read buffer. Fix by copying only ret (actually received) bytes to userspace.

Linux

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow On the non-root path, __tb_property_parse_dir() takes dir_len from entry->length (u16 widened to size_t). Two distinct OOB conditions follow when entry->length < 4: 1. The non-root path begins with kmemdup(&block[dir_offset], sizeof(*dir->uuid), ...) which always reads 4 dwords from dir_offset. tb_property_entry_valid() only enforces dir_offset + entry->length <= block_len, so a crafted entry with dir_offset close to the end of the property block and entry->length in 0..3 passes that gate but lets the UUID copy run off the block (e.g. dir_offset = 497, dir_len = 3 in a 500-dword block reads block[497..501]). 2. After the kmemdup, content_len = dir_len - 4 underflows size_t to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry walk runs OOB on each iteration until an entry fails validation or the kernel oopses on an unmapped page. Reject dir_len < 4 on the non-root path *before* the UUID kmemdup, which closes both holes. Also move INIT_LIST_HEAD(&dir->properties) up to immediately after the dir allocation so the new error-return path (and the existing uuid-alloc failure path) calling tb_property_free_dir() sees a walkable list rather than the zero-initialized NULL next/prev that list_for_each_entry_safe() would oops on.

Linux

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Cap recursion depth in __tb_property_parse_dir() A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line.

Linux

In the Linux kernel, the following vulnerability has been resolved: scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the descriptor cursor by an attacker-supplied fip_dlen without ever requiring dlen >= sizeof(struct fip_desc) in the default branch. The named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor (fip_dtype >= 128, which the standard requires receivers to silently ignore) skipped that check entirely. An unauthenticated L2 peer on the FCoE control VLAN could hang fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely by emitting one FIP CVL frame whose single descriptor had fip_dtype == FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes per iteration and the loop condition rlen >= sizeof(*desc) stayed true forever, blocking every subsequent FIP frame on that controller. Tighten the outer dlen guard to also reject dlen < sizeof(struct fip_desc), so a malformed descriptor whose length cannot even cover the descriptor header is rejected before the switch. This is the same lower-bound the named cases already apply and is the minimum scope that closes the loop.

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL pointer bug in svm_range_set_attr The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm before calling kfd_ioctl_svm. (cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix lock leak on ENOMEM in AMDGPU_GEM_OP_GET_MAPPING_INFO The AMDGPU_GEM_OP_GET_MAPPING_INFO branch of amdgpu_gem_op_ioctl() holds three cleanup-tracked resources before calling kvcalloc(): the drm_gem_object reference from drm_gem_object_lookup(), the drm_exec lock on the looked-up GEM via drm_exec_lock_obj(), and the drm_exec lock on the per-process VM root page directory via amdgpu_vm_lock_pd(). All three are released by the out_exec label that every other error path in this function jumps to. The kvcalloc() failure path returns -ENOMEM directly, skipping out_exec and leaking all three. The leaked per-process VM root PD dma_resv lock is the load-bearing leak: any subsequent operation on the same VM (further GEM ops, command-submission, eviction, TTM shrinker callbacks) blocks on the held lock. DRM_IOCTL_AMDGPU_GEM_OP is DRM_AUTH | DRM_RENDER_ALLOW, so this is an unprivileged-local denial of service against the caller's GPU context, reachable by any process with /dev/dri/renderD* access. Route the failure through out_exec so drm_exec_fini() and drm_gem_object_put() run. Reproduced on stock 7.0.0-10, Ryzen 7 5700U / Radeon Vega (Lucienne): the failing ioctl returns -ENOMEM and a second GET_MAPPING_INFO on the same fd then blocks in drm_exec_lock_obj() on the leaked dma_resv. SIGKILL on the caller does not reap the task; the fd-release path during process exit goes through amdgpu_gem_object_close() -> drm_exec_prepare_obj() on the same lock, leaving the task in D state until the box is rebooted. The patched kernel was not rebuilt and re-tested on this hardware; the fix is mechanical. Tested on a single Lucienne / Vega box only. Ziyi Guo posted an independent INT_MAX-bound check for args->num_entries in the same branch [1]; the two patches are complementary and can land in either order. (cherry picked from commit b69d3256d79de15f54c322986ff4da68f1d65b0a)

Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check num_entries in GEM_OP GET_MAPPING_INFO kvcalloc(args->num_entries, sizeof(*vm_entries), GFP_KERNEL) at amdgpu_gem.c:1050 uses the user-supplied num_entries directly without any upper bounds check. Since num_entries is a __u32 and sizeof(drm_amdgpu_gem_vm_entry) is 32 bytes, a large num_entries produces an allocation exceeding INT_MAX, triggering WARNING in __kvmalloc_node_noprof(), causing a kernel WARNING, TAINT_WARN, and panic on CONFIG_PANIC_ON_WARN=y systems. Add a size bounds check before we invoke the kvzalloc() to reject oversized num_entries early with -EINVAL. (cherry picked from commit 1fe7bf5457f6efd7be60b17e23163ba54341d73d)

Linux

In the Linux kernel, the following vulnerability has been resolved: serial: dz: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a90 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]--- -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because the DZ device is fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the zs driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Conversely only starting the console port so late lets the reset code fully utilise our delay handlers, so switch from udelay() to fsleep() for transmitter draining so as to avoid busy-waiting for an excessive amount of time.

Linux

In the Linux kernel, the following vulnerability has been resolved: serial: zs: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d60 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c03 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally.

Linux

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range() aie2_populate_range() jumps back to the again label without calling mmput(mm), leaking a reference to the mm_struct. Add the missing mmput() before jumping to again.

Linux

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst, iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock(). These fields may be modified concurrently by connect() or setsockopt() on the same socket, resulting in data-races reported by KCSAN. Fix this by snapshotting the required fields under lock_sock() before calling hci_get_route(). BUG: KCSAN: data-race in memcmp+0x45/0xb0 race at unknown origin, with read to 0xffff8880122135cf of 1 bytes by task 333 on cpu 1: memcmp+0x45/0xb0 hci_get_route+0x27e/0x490 iso_connect_cis+0x4c/0xa10 iso_sock_connect+0x60e/0xb30 __sys_connect_file+0xbd/0xe0 __sys_connect+0xe0/0x110 __x64_sys_connect+0x40/0x50 x64_sys_call+0xcad/0x1c60 do_syscall_64+0x133/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Linux

In the Linux kernel, the following vulnerability has been resolved: net: garp: fix unsigned integer underflow in garp_pdu_parse_attr The receive-side GARP attribute parser computes dlen with reversed operands: dlen = sizeof(*ga) - ga->len; ga->len is the on-wire attribute length and includes the GARP attribute header. For normal attributes with data, ga->len is larger than sizeof(*ga), so the subtraction underflows in unsigned arithmetic. The resulting value is later passed to garp_attr_lookup(), whose length argument is u8. After truncation, the parsed data length usually no longer matches the length stored for locally registered attributes, so received Join/Leave events are ignored. This breaks the GARP receive path for common attributes, such as GVRP VLAN registration attributes. Compute the data length as the attribute length minus the header length.

Linux

In the Linux kernel, the following vulnerability has been resolved: PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found In mtk_pcie_setup_irq(), the IRQ domains are allocated before the controller's IRQ is fetched. If the latter fails, the function directly returns an error, without cleaning up the allocated domains. Hence, reverse the order so that the IRQ domains are allocated after the controller's IRQ is found. This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI: mediatek-gen3: add power control support".

Linux

In the Linux kernel, the following vulnerability has been resolved: spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback mtk_snand_probe() registers the on-host NAND ECC engine, but teardown was missing from both probe unwind and remove-time cleanup. Add a devm cleanup action after successful registration so nand_ecc_unregister_on_host_hw_engine() runs automatically on probe failures and during device removal.

Linux

In the Linux kernel, the following vulnerability has been resolved: ASoC: rsnd: Fix potential out-of-bounds access of component_dais[] component_dais[RSND_MAX_COMPONENT] is initially zero-initialized and later populated in rsnd_dai_of_node(). However, the existing boundary check: if (i >= RSND_MAX_COMPONENT) does not guarantee that the last valid element remains zero. As a result, the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero, which may lead to an out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Linux

In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Check return code before setting timestamp output ena_phc_gettimex64() is setting the output parameter regardless of whether ena_com_phc_get_timestamp() succeeded or failed. When ena_com_phc_get_timestamp() returns an error, the timestamp parameter may contain uninitialized stack memory (e.g., when PHC is disabled or in blocked state) or invalid hardware values. Passing these to userspace via the PTP ioctl is both a security issue (information leak) and a correctness bug. Fix by checking the return code after releasing the lock and only setting the output timestamp on success.